Notices
Audio/Video Parts and Services for your RX8 at Mazdaparts.com

Now Selling P.I.E

Thread Tools
 
Search this Thread
 
Rate Thread
 
Old 10-08-2004 | 08:13 PM
  #1  
thew's Avatar
Thread Starter
Thews8
 
Joined: Apr 2004
Posts: 2,534
Likes: 9
From: Oregon South Coast
Talking Now Selling P.I.E

Note : We sell all the P.I.E. Products .. Just ask us for a price.


MAZ/PC-ALP MAZDA TO ALPINE

CONNECTS TO FACTORY: 16-PIN CONNECTOR AT HEADUNIT
COMPATIBLE WITH: Rx8 Head Units with Firmware Ver 9.55 or higher !








MAZPCALPRetail Price: $99.95
Rx8Garage Price 75.99









The PIE ALP/M-RCA converts the CD changer port of any Alpine Versati
le-Link Ready M-Bus head unit to RCA level inputs. The head unit must be VERSATILE-LINK ready! Use this auxiliary input converter to add satellite radio, a MiniDisc player, a portable MP3 player, a DVD player, an iPod, a game system, or any device where the audio needs to be heard through the vehicle's audio system. Connects to the CD changer port on the rear of the receiver.
ALPMRCARetail Price: $39.95

Rx8Garage.net Price : $14.50
both parts $ 90.49 shipping is included for Rx8club members only. Please use your screen name in the shipping address for the free shipping offer.




Click here to buy now. Make sure you note in your shipping address that you are a rx8club member and your screen name for the Club price.

Last edited by thew; 11-11-2004 at 10:23 PM.
Old 10-08-2004 | 10:11 PM
  #2  
Brad Theurer's Avatar
Registered User
 
Joined: Oct 2004
Posts: 6
Likes: 0
thew, a question - I want to be able to install an Alpine CHA-S634 changer (using the P.I.E. MAZ/PC-ALP and Alpine KCA-130B, right?), but ALSO have the option of (eventually) putting in satellite radio... is that possible? Is there some way I can switch between the two, using some sort of splitter/multiplug/whatever? Unfortunately my firmware version is 9.53, so I know that a new HU or sending you my HU to do the upgrade to 9.67 will be necessary.

Thanks...
Brad
Old 10-08-2004 | 10:35 PM
  #3  
thew's Avatar
Thread Starter
Thews8
 
Joined: Apr 2004
Posts: 2,534
Likes: 9
From: Oregon South Coast
yes.. and yes.. let me research your question but you can just put a simple Y adapter on your Pie and then have 2 inputs. As for the Changer yes.. Look at theri site they make a multipal input box now. SO if yo find it send me the part number.. ill get it for ya.

send me tht HU asap.. I will not be able to do thme after Nov 1st
Old 10-13-2004 | 10:15 PM
  #4  
thew's Avatar
Thread Starter
Thews8
 
Joined: Apr 2004
Posts: 2,534
Likes: 9
From: Oregon South Coast
First batch sold out.. I have more in my hands from ups now..

Keep it comming i cant keep the price low for to long.

Also I carrry all the P.I.E. Line I will soon be adding the info to my site..
but for now just ask i can get it .
Old 10-22-2004 | 05:42 PM
  #5  
thew's Avatar
Thread Starter
Thews8
 
Joined: Apr 2004
Posts: 2,534
Likes: 9
From: Oregon South Coast
Update. Price Deal ending soon ..

I have to stop this low price at the end of this month ..

Oct 31 is the last day for the club price above.
Old 10-27-2004 | 11:05 AM
  #6  
sphinxatl's Avatar
Registered User
 
Joined: Apr 2004
Posts: 3
Likes: 0
From: Atlanta
Interested in getting

hi, I'm interested in getting, but I'm having trouble ordering from your site
Old 10-29-2004 | 03:49 AM
  #7  
thew's Avatar
Thread Starter
Thews8
 
Joined: Apr 2004
Posts: 2,534
Likes: 9
From: Oregon South Coast
my site should be all better now.
if it is not reset your coikies.. the new Secure path to cart is a bit touchy atm .
also you can call me ..
Old 10-30-2004 | 06:18 PM
  #8  
thew's Avatar
Thread Starter
Thews8
 
Joined: Apr 2004
Posts: 2,534
Likes: 9
From: Oregon South Coast
ATTN: the Great Rx8Club Price above will end Oct 31st Midnight.. Happy Halloween ..

Hurry. 4 more still in stock ready to ship. !!! not for long !
Old 10-30-2004 | 07:27 PM
  #9  
lonnieschatz's Avatar
Registered User
 
Joined: Sep 2004
Posts: 6
Likes: 0
Question pie problems

i just hook up the pie set i got from you. the install was easy. i am using it to run my xm rody via the rca imputs to the factory bose head unit. only thing i dont understand is when you push cd button the xm works fine but after about 30 seconds the head unit goes silent, looks as if its searching for the cd chager?, the head unit reads ex 1 flashes then cuts off. help. thanks
Old 10-30-2004 | 08:33 PM
  #10  
thew's Avatar
Thread Starter
Thews8
 
Joined: Apr 2004
Posts: 2,534
Likes: 9
From: Oregon South Coast
remember we asked you what Firmware you were running?
it will only work with firmware ver 9.55 or higher.
Sounds like you need to ship that HU to me ASAP so i can get it upgraded.
Old 10-31-2004 | 05:50 PM
  #11  
lonnieschatz's Avatar
Registered User
 
Joined: Sep 2004
Posts: 6
Likes: 0
Thumbs up upgrade head unit

thanks yea after i placed my question i dug up what the problem was on the site. bummer, how do i send it to you. can i use my fed ex account? thanks for the help.
Old 10-31-2004 | 08:57 PM
  #12  
thew's Avatar
Thread Starter
Thews8
 
Joined: Apr 2004
Posts: 2,534
Likes: 9
From: Oregon South Coast
yes i can still upgrade it but you have to hurry.. or wait about 2 weeks .
email me i will give you the info .. you can use you Fed account thats fine
thew@sbcreative.com
Old 11-11-2004 | 10:05 PM
  #13  
Brad Theurer's Avatar
Registered User
 
Joined: Oct 2004
Posts: 6
Likes: 0
It All Works!

Thanks to a head unit upgrade from version 9.53 to 9.67 from thew (thanks!!), plus the MAZ/PC-ALP adapter from P.I.E. and KCA-130B Alpine adapter, I now have an Alpine CDA-S634 6 disc MP3 changer in the trunk of my RX-8 playing perfectly through the HU and steering wheel controls.

Next comes satellite radio, hopefully. Since this setup takes up the CD changer port in the back of the HU, I will need to get a device that allows me to keep my current Alpine changer setup intact yet hook up satellite receiver too... fortunately P.I.E. also makes the ALP/AI-AUX that will let me do that - guess this splitter replaces the ALP/M-RCA unit others are using that don't have a need for an Alpine CD changer. Because I just have the basic HU with single disc CD, there's plenty of room back there for all these adapters and also (hopefully) enough room to possibly put the new Mazda Sirius satellite module where it belongs, assuming that Sirius turns out to be my choice of sat provider. I have, of course, a radio with no SAT button... does anybody out there know which button would control the satellite radio access? Perhaps the CD button will toggle between single disc, CD changer and SAT radio??
Old 11-11-2004 | 10:18 PM
  #14  
thew's Avatar
Thread Starter
Thews8
 
Joined: Apr 2004
Posts: 2,534
Likes: 9
From: Oregon South Coast
i will know that in about i week .. but i do know that they all want to use the same plug in the HU.. I talked to PIE abount making a spliter for it. but so far if you pic the Sat box from Mazda it will need that port. . so you can use the Pie multy input device but you can use the OEM mazda sat box. it will have to have a rca audio out.
Old 11-11-2004 | 10:23 PM
  #15  
thew's Avatar
Thread Starter
Thews8
 
Joined: Apr 2004
Posts: 2,534
Likes: 9
From: Oregon South Coast
shipping is now free for members only this part only.
Old 11-24-2004 | 11:03 PM
  #16  
thew's Avatar
Thread Starter
Thews8
 
Joined: Apr 2004
Posts: 2,534
Likes: 9
From: Oregon South Coast
holiday deal. the MAZ/PC alp will be $5.00 off untill Dec 25 ..
Old 11-29-2004 | 09:29 AM
  #17  
foxman's Avatar
Torque is Good
 
Joined: May 2004
Posts: 694
Likes: 0
From: Indianapolis, IN
Originally Posted by thew
holiday deal. the MAZ/PC alp will be $5.00 off untill Dec 25 ..
Do you need both of these parts to do it and how can one check firmware?
Old 11-29-2004 | 01:36 PM
  #18  
thew's Avatar
Thread Starter
Thews8
 
Joined: Apr 2004
Posts: 2,534
Likes: 9
From: Oregon South Coast
Depends. if you want to use an Alpine device you need a diffent Alpine connecter. As well if you have a Pioneer or Kenwood theres a box for that to. But if you just want a good clean Line in then use the above set up. yes you need the box and the adapter.

To check firmware on the HU Push and hold the text button while holding it also hold the 1 preset. This will tell you your Firmware. if you do it wrong you will clear your memory for preset 1 and the screen will say clear. Just make sure you hold the text button in and then push the preset 1.
Old 11-29-2004 | 01:40 PM
  #19  
foxman's Avatar
Torque is Good
 
Joined: May 2004
Posts: 694
Likes: 0
From: Indianapolis, IN
I am wanting it for sat radio such as xm commander.
Old 11-29-2004 | 10:48 PM
  #20  
pgershon's Avatar
Registered User
 
Joined: Oct 2004
Posts: 21
Likes: 0
Do you know if the HU display will display ID3 tags? I am thinking of exchanging my IceLink for an IceLink Plus.
Old 12-02-2004 | 03:27 PM
  #21  
thew's Avatar
Thread Starter
Thews8
 
Joined: Apr 2004
Posts: 2,534
Likes: 9
From: Oregon South Coast
no it wont
the HU display as of yet has not been cracked.
Old 12-06-2004 | 12:54 PM
  #22  
foxman's Avatar
Torque is Good
 
Joined: May 2004
Posts: 694
Likes: 0
From: Indianapolis, IN
Firmware is 9.55, do I need both parts for sat radio?
Old 12-06-2004 | 01:28 PM
  #23  
Tamas's Avatar
Registered Lunatic
iTrader: (1)
 
Joined: Aug 2003
Posts: 3,581
Likes: 38
From: SF Bay Area, California
Yes.
Old 12-06-2004 | 03:04 PM
  #24  
spinstyle808's Avatar
Registered
 
Joined: Dec 2004
Posts: 13
Likes: 0
From: Deerfield Beach, FL
Ipod and SAT question

Hi. I have a 2005 with the SAT button. I want to hook up an ipod and also put in the sattelite reciever. Can I do both? Will it take up the satellite spot on the back of the head unit. Thanks.
Old 12-06-2004 | 03:29 PM
  #25  
thew's Avatar
Thread Starter
Thews8
 
Joined: Apr 2004
Posts: 2,534
Likes: 9
From: Oregon South Coast
yes the MAzda XM sat box will use the same port as the PIE or the ICE link . You can get a device from PIE that will allow more than one RCA input but then you will not need the Mazda Sat box instead you will buy the aftermarket version and plug it into one of the inputs on your PIE. This will give you your Sat audio but not the same controll as the OEM version. IE you can mute and rase and lower volume. but to chage stations you will need to touch the Sat box or use its remote. The Mazda Version will work with the controlls in the car.

Last edited by thew; 12-10-2004 at 05:22 PM.


You have already rated this thread Rating: Thread Rating: 0 votes,  average.

Quick Reply: Now Selling P.I.E



All times are GMT -5. The time now is 01:03 PM.