16B Rotary?????
#1
16B Rotary?????
In April 2004 Motor pg 12 is the following:
"Whispers and rumours around Mazda tell us a larger version of the twin-rotor Renesis is in development.
Previous evolutions - 10A, 12A to 13B - have all increaed rotor housing width by 10mm, but this time it's thought Mazda might be increasing the height of the housings as well.
Effectively a bored and stroked rotary, capacity of the new Rensisis would increase to around 1.6 litres and therefore earn a 16B label.
Use may be for the next evolution of the RX-8 or the rebirth of the RX-7."
cheers
michael
"Whispers and rumours around Mazda tell us a larger version of the twin-rotor Renesis is in development.
Previous evolutions - 10A, 12A to 13B - have all increaed rotor housing width by 10mm, but this time it's thought Mazda might be increasing the height of the housings as well.
Effectively a bored and stroked rotary, capacity of the new Rensisis would increase to around 1.6 litres and therefore earn a 16B label.
Use may be for the next evolution of the RX-8 or the rebirth of the RX-7."
cheers
michael
#4
DMHR
Mazda apparently will not only increase the width of the rotary housing by 10mm , but also increase its HEIGHT hence the extra 100cc making it 16OOCC or 1.6.
CHEERS
michael
Mazda apparently will not only increase the width of the rotary housing by 10mm , but also increase its HEIGHT hence the extra 100cc making it 16OOCC or 1.6.
CHEERS
michael
#6
Originally posted by Lock & Load
DMHR
Mazda apparently will not only increase the width of the rotary housing by 10mm , but also increase its HEIGHT hence the extra 100cc making it 16OOCC or 1.6.
CHEERS
michael
DMHR
Mazda apparently will not only increase the width of the rotary housing by 10mm , but also increase its HEIGHT hence the extra 100cc making it 16OOCC or 1.6.
CHEERS
michael
First I have heard of that one. The extra 10mm rumour has been floating for a while but not the extra stroke rumour.
Mazda actually did a longer stroke rotary engine with the 13A engine from 69-72. Dropped that idea quoting (at the time) that extra width was better than extra stroke.
After that, they developed the 12A by adding 10mm & the 13B with another 10mm then by going out to 90mm, they had the 15A engine in pre-production form ready for the 74 model cars. Unfortunately the OPEC oil crisis killed that engine off.
Sad hey!!
#7
Originally posted by Lock & Load
16OOCC or 1.6.
16OOCC or 1.6.
Does that mean my car only has 13 ooccs
Was there a 21A mentioned in the RX-8 book? I haven't got mine, lent it to another rotar-head.
Cheers,
Hymee.
#8
The 21A was from the still-born group B rally motor.
The 16B comes from adding 20mm to a 13B.
I thought the whole thing was largely bullshit until I saw the photo of the 16B 'housing' it's a pretty funny looking housing but the photo doesnt look fake at all.
-pete
The 16B comes from adding 20mm to a 13B.
I thought the whole thing was largely bullshit until I saw the photo of the 16B 'housing' it's a pretty funny looking housing but the photo doesnt look fake at all.
-pete
#11
Originally posted by Hymee
^^^
Hehehe. I'm still waiting for them to re-release the P76 with a 5.7L LS1 style enlargement of the 4.4L engine.
Cheers,
Grandpa.
^^^
Hehehe. I'm still waiting for them to re-release the P76 with a 5.7L LS1 style enlargement of the 4.4L engine.
Cheers,
Grandpa.
If your a bloody red neck.
#13
Originally posted by Hymee
Please explain? Mine didn't have gun racks or confederate flags.
Please explain? Mine didn't have gun racks or confederate flags.
No Hymee is correct any red blooded Aussie carries a cricket bat , a sawn off double barell shotgun .AND LOTS OF BEER .
cheers
michael
Thread
Thread Starter
Forum
Replies
Last Post
jasonrxeight
RX-8's For Sale/Wanted
2
09-30-2015 02:53 PM