Brake Rotors
#1
Shootin' from the hip
Thread Starter
Join Date: Apr 2005
Location: Sydney, Australia
Posts: 7,584
Likes: 0
Received 0 Likes
on
0 Posts
Brake Rotors
Haven't played with the car in a while and feeling the itch again.
Thinking of replacing the rotors. MikeyR was looking into it as well but he's playing MIA atm, so I thought I'd throw it open to other suggestions.
Taka's brake workup has been well documented. Anybody else replaced rotors with a recommendation to offer?
At this stage I don't want to replace the calipers but that's a probability down the track.
Thinking of replacing the rotors. MikeyR was looking into it as well but he's playing MIA atm, so I thought I'd throw it open to other suggestions.
Taka's brake workup has been well documented. Anybody else replaced rotors with a recommendation to offer?
At this stage I don't want to replace the calipers but that's a probability down the track.
#4
New Member
I do not recommend the DBA 4000 series.
My rear rotor is just an ugly plate. It burns easily, wraps easily and does not wear as neat as the front Project Mu, which bears most of the braking force. I already machined the rear DBA already.![Frown](https://www.rx8club.com/images/smilies/frown.gif)
Alternatives:
You know about Project Mu
![](http://www.project-mu.co.jp/product-folder/rotor/image/scr-pro.jpg)
Endless
![](http://www.endless-sport.co.jp/brake_rotor/straight_6/img/photo.jpg)
They are both FC forged alloy.... whatever that means![Dunno](https://www.rx8club.com/images/smilies/dunno.gif)
Generally, ANY 2-piece slotted design is worth a go. They are lighter, more able to prevent heat build up, and certainly look cooler.
My rear rotor is just an ugly plate. It burns easily, wraps easily and does not wear as neat as the front Project Mu, which bears most of the braking force. I already machined the rear DBA already.
![Frown](https://www.rx8club.com/images/smilies/frown.gif)
Alternatives:
You know about Project Mu
![Wink](https://www.rx8club.com/images/smilies/wink.gif)
![](http://www.project-mu.co.jp/product-folder/rotor/image/scr-pro.jpg)
Endless
![](http://www.endless-sport.co.jp/brake_rotor/straight_6/img/photo.jpg)
They are both FC forged alloy.... whatever that means
![Dunno](https://www.rx8club.com/images/smilies/dunno.gif)
Generally, ANY 2-piece slotted design is worth a go. They are lighter, more able to prevent heat build up, and certainly look cooler.
Last edited by takahashi; 03-03-2007 at 07:11 PM.
#5
cry me a river...
Join Date: Dec 2003
Location: Syd / Melb
Posts: 4,475
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by Cromax
Since you'll have to replace pads as well, why not do calipers, pads and rotors at the same time?
![Big Grin](https://www.rx8club.com/images/smilies/biggrin.gif)
all depends on how hardcore you wanna go.
Originally Posted by takahashi
I do not recommend the DBA 4000 series.
My rear rotor is just an ugly plate. It burns easily, wraps easily and does not wear as neat as the front Project Mu, which bears most of the braking force. I already machined the rear DBA already.![Frown](https://www.rx8club.com/images/smilies/frown.gif)
My rear rotor is just an ugly plate. It burns easily, wraps easily and does not wear as neat as the front Project Mu, which bears most of the braking force. I already machined the rear DBA already.
![Frown](https://www.rx8club.com/images/smilies/frown.gif)
![Crazy](https://www.rx8club.com/images/smilies/crazy.gif)
are they slotted or slotted/cross drilled rotors? what brake pad did you use with the DBA rotors?
#6
Buzz Buzz Buzz
Join Date: Mar 2005
Location: Melbourne, Victoria
Posts: 1,931
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by EZZY
you are talking about say $1000-ish vs. quite a few $1000's for the whole lot. might as well do the braided brake lines while you are at it
all depends on how hardcore you wanna go.
![Big Grin](https://www.rx8club.com/images/smilies/biggrin.gif)
all depends on how hardcore you wanna go.
... so why waste time on upgrading a few things now which will have to be thrown away when you make the big step anyway?
Just my 2 cents
#7
New Member
Originally Posted by EZZY
that sounds crap....
are they slotted or slotted/cross drilled rotors? what brake pad did you use with the DBA rotors?
![Crazy](https://www.rx8club.com/images/smilies/crazy.gif)
are they slotted or slotted/cross drilled rotors? what brake pad did you use with the DBA rotors?
#8
Shootin' from the hip
Thread Starter
Join Date: Apr 2005
Location: Sydney, Australia
Posts: 7,584
Likes: 0
Received 0 Likes
on
0 Posts
Thanks for the suggestions so far.
Just to clarify, I do have a set of EBC red stuff ceramic pads that I'm about to pick up (see Sydney Run thread).
I don't really want to spend the $$$ on calipers as well at this stage but the rotors are looking tired. So I wanted some rotors that are compatible with the stock calipers but will also be suitable for aftermarket calipers down the track.
The Project Mu's are probably the front runners at this stage (assuming they're suitable for the stock caliper??) but I'm open to other ideas from those who have already trod this path.
Take the point on the braided lines. That's also a future option I'll look at.
So, any more ideas?
Just to clarify, I do have a set of EBC red stuff ceramic pads that I'm about to pick up (see Sydney Run thread).
I don't really want to spend the $$$ on calipers as well at this stage but the rotors are looking tired. So I wanted some rotors that are compatible with the stock calipers but will also be suitable for aftermarket calipers down the track.
The Project Mu's are probably the front runners at this stage (assuming they're suitable for the stock caliper??) but I'm open to other ideas from those who have already trod this path.
Take the point on the braided lines. That's also a future option I'll look at.
So, any more ideas?
#10
New Member
EBC gold they are called.
P Mu rotors are for stock replacement (for your stock caliper) Dave. They are slightly more expensive than the DBA 5000 rotors.
Is there a Brembo alternative? Last time I check they don't make stock caliper replacement rotors, but is there anything close/ same size? AP does not have the same size, when I did a search for my set....
![Lol](https://www.rx8club.com/images/smilies/lol.gif)
P Mu rotors are for stock replacement (for your stock caliper) Dave. They are slightly more expensive than the DBA 5000 rotors.
Is there a Brembo alternative? Last time I check they don't make stock caliper replacement rotors, but is there anything close/ same size? AP does not have the same size, when I did a search for my set....
#11
Hmmmmmm.........
Join Date: Mar 2005
Location: Melbourne, Australia
Posts: 3,564
Likes: 0
Received 6 Likes
on
4 Posts
http://www.racingbrake.com/RX8_s/4393.htm
http://www.ebcbrakes.com.au/html/pro...p#Brake_Rotors
http://www.pettitracing.com/rx8/index_brakes.htm
Also check out Japan Parts because Auto Exe make a set as well.
I have to say though that for simplicity and price I think the Project Mu are the way to go. They are readily available for < $1000 and install is reasonably simple from what I have heard.
http://www.ebcbrakes.com.au/html/pro...p#Brake_Rotors
http://www.pettitracing.com/rx8/index_brakes.htm
Also check out Japan Parts because Auto Exe make a set as well.
I have to say though that for simplicity and price I think the Project Mu are the way to go. They are readily available for < $1000 and install is reasonably simple from what I have heard.
#12
Hmmmmmm.........
Join Date: Mar 2005
Location: Melbourne, Australia
Posts: 3,564
Likes: 0
Received 6 Likes
on
4 Posts
As for brembo, I found these a while ago as well but were never sure that they were actually brembos.
http://www.rx7store.net/product_p/slottedrotorrx8.htm
http://www.rx7store.net/product_p/slottedrotorrx8.htm
#13
i need a new photo
Join Date: Jun 2004
Location: Sydney
Posts: 1,013
Likes: 0
Received 0 Likes
on
0 Posts
Not MIA just been overseas a bit!
Dave, i did a whole lot of research and the Racingbrake versions get good write up's around the forums for a reasonable price. DBA's are over $1000 for the 4000's and as Taka mentioned, not great.
I'll email you.
Dave, i did a whole lot of research and the Racingbrake versions get good write up's around the forums for a reasonable price. DBA's are over $1000 for the 4000's and as Taka mentioned, not great.
I'll email you.
#14
New Member
Racing beat slotted
Looking at the two piece slotted
Say $300 US shipped is $1200 USD for 4 and it is about $1530 AUD.
hmmm... it is not really cheap. Just a touch cheaper. They don't look too bad IMO. Give it a try and let us know.
Say $300 US shipped is $1200 USD for 4 and it is about $1530 AUD.
hmmm... it is not really cheap. Just a touch cheaper. They don't look too bad IMO. Give it a try and let us know.
#16
cry me a river...
Join Date: Dec 2003
Location: Syd / Melb
Posts: 4,475
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by takahashi
They are single piece slotted, not drilled. I use the same pad (Project Mu HC+) as it is in the front.
![Hahano](https://www.rx8club.com/images/smilies/hahano.gif)
here is a "cheap-ish" brembo calipers option...
![Evil Laughter](https://www.rx8club.com/images/smilies/evil_laughter.gif)
![Mdrmed](https://www.rx8club.com/images/smilies/mdrmed.gif)
![Suspect](https://www.rx8club.com/images/smilies/suspect.gif)
![Rollinglaugh](https://www.rx8club.com/images/smilies/rollinglaugh.gif)
![Rofl](https://www.rx8club.com/images/smilies/rofl.gif)
#17
Surf Hard, Drive Hard
Join Date: Feb 2007
Location: Indialantic, Florida
Posts: 7,840
Likes: 0
Received 12 Likes
on
9 Posts
I bought the ones at the bottom of this page yesterday.
http://www.good-win-racing.com/Mazda...X8/Brakes.html
The picture is of drilled and slotted, but I bought only slotted. Click on the link for each of those for more info.
http://www.good-win-racing.com/Mazda...X8/Brakes.html
The picture is of drilled and slotted, but I bought only slotted. Click on the link for each of those for more info.
Last edited by Mazurfer; 03-04-2007 at 06:10 AM.
#18
Shootin' from the hip
Thread Starter
Join Date: Apr 2005
Location: Sydney, Australia
Posts: 7,584
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by mikeyr
Not MIA just been overseas a bit!
Dave, i did a whole lot of research and the Racingbrake versions get good write up's around the forums for a reasonable price. DBA's are over $1000 for the 4000's and as Taka mentioned, not great.
I'll email you.
Dave, i did a whole lot of research and the Racingbrake versions get good write up's around the forums for a reasonable price. DBA's are over $1000 for the 4000's and as Taka mentioned, not great.
I'll email you.
![Cwm27](https://www.rx8club.com/images/smilies/cwm27.gif)
Happy to piggyback onto your research Mike. Let me know what you've come up with and we'll talk GB options.
Thanks to the rest of you. Really appreciate your efforts. As usual, I'm now totally confused as to which product to go for.
![Eyecrazy](https://www.rx8club.com/images/smilies/Eyecrazy.gif)
![Smilie](https://www.rx8club.com/images/smilies/smile.gif)
#21
Shootin' from the hip
Thread Starter
Join Date: Apr 2005
Location: Sydney, Australia
Posts: 7,584
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by takahashi
The Mazda rotors are $400 each to replace.
That is the reason why.
That is the reason why.
#22
Replacement OEM rotors front and rear from Online Mazda parts cost $US 510. Add 50 for shipping and the exchange rate works out at about $A750 for all four. They seem to be a good rotor for street use, but I do not track the car, so I will leave that to others for comment.
#23
New Member
$50 for shipping. I wanna see that! They are kind of heavy you know. Even sea shipment from USPS is $60 for just a rear and front rotor.
I place a quote on USPS for 35 pound. That is one front (18lbs), one rear (12lbs) and packaging.
http://ircalc.usps.gov/intl_speed.as...ds=35&Ounces=0
That is $60 US!
it will be 120$ to ship, and take 6 weeks ![Roll Eyes (Sarcastic)](https://www.rx8club.com/images/smilies/rolleyes.gif)
That is why I say forget US - too far. But still work out cheaper I think
I place a quote on USPS for 35 pound. That is one front (18lbs), one rear (12lbs) and packaging.
http://ircalc.usps.gov/intl_speed.as...ds=35&Ounces=0
That is $60 US!
![EEK!](https://www.rx8club.com/images/smilies/eek.gif)
![Roll Eyes (Sarcastic)](https://www.rx8club.com/images/smilies/rolleyes.gif)
That is why I say forget US - too far. But still work out cheaper I think
![Eyecrazy](https://www.rx8club.com/images/smilies/Eyecrazy.gif)
Last edited by takahashi; 03-04-2007 at 10:04 PM.
#25
Guest
Posts: n/a
Dave, hate to be a poo-head, but do you really need the new rotors?
I mean I understand youve done the suspension mods now.. the rims, ur not into any other cosmetic mods.. hmm werent u only going to keep the car for few yrs ?? is it worth spending all this money on new rotors when we know we wont be making our money back. If you really got the mod bug, maybe something thats a little cheaper?
You could be our little lab rat and go have some porting working done to the engine instead of S/C and Turbo... ? lol I cant really think of any other mods, so I can see why you are thinking the rotors - but at the end of the day theres heaps of guys here that continue to track the car - and done many track days - that are perfectly happy with the stock brakes/rotors.
Although im not the 1 to really talk people out of mods....... lol just do what you want! haha
I mean I understand youve done the suspension mods now.. the rims, ur not into any other cosmetic mods.. hmm werent u only going to keep the car for few yrs ?? is it worth spending all this money on new rotors when we know we wont be making our money back. If you really got the mod bug, maybe something thats a little cheaper?
You could be our little lab rat and go have some porting working done to the engine instead of S/C and Turbo... ? lol I cant really think of any other mods, so I can see why you are thinking the rotors - but at the end of the day theres heaps of guys here that continue to track the car - and done many track days - that are perfectly happy with the stock brakes/rotors.
Although im not the 1 to really talk people out of mods....... lol just do what you want! haha
![Wallbash](https://www.rx8club.com/images/smilies/wallbash.gif)