CalID read from scan tool
#26
I tested the CAN tool on a European SP (mine!) and it worked fine. The functionnalities were beyond my expectencies for a prototype software! Well done Hymee and SCO.
I'm meeting some other EU owners next Sunday. Will test my unit on HPs.
I'm meeting some other EU owners next Sunday. Will test my unit on HPs.
Last edited by Rasputin; 09-29-2004 at 02:46 PM.
#31
Originally Posted by tonym
Hymee,
This looks great (just like my Hymee-Enhanced exhaust does, but in software). You say a PPC with serial connect, but lots of PPC varients have "unique" connectors. I wold love to add this new function to my wonderfully fleible XDA (Mobile + PDA) but would you have a cable/adaptor to suit this?
Tony.
This looks great (just like my Hymee-Enhanced exhaust does, but in software). You say a PPC with serial connect, but lots of PPC varients have "unique" connectors. I wold love to add this new function to my wonderfully fleible XDA (Mobile + PDA) but would you have a cable/adaptor to suit this?
Tony.
That is a good question. Here is what I replied on another thread...
Originally Posted by Hymee
You are not the first to ask, but this is the first time I have had much of a chance to give a detailed answer.
Our diagnostic interface will present itself as a male DB9 connector. To connect to a laptop with a serial "COM" port, you need a "crossed" DB9-DB9 (female-female) cable. These are often called "data transfer" or "null modem" cables. I have an off-the shelf "Belkin" brand part of which I can supply the part number.
For a laptop without a serial port, you need a USB - Serial adaptor. I have tested a number of units. Not all work. I have found a unit supplied by an international company that I recommend as "Hymee Approved", and one of these is already out in the field. You need to same serial cable as mentioned above.
For a PocketPC / XDA, since our unit presents itself as a standard DB9 serial connector, you need an appropriate serial cable for the unit you have. These are very model specific. These units normally present as a female DB9 connector, ready to plug straight into the back of a PC's COM port. I need to check specifically, but I am tending to think that since the serial cable to the PPC is already "crossed", then the cable will be able to plug straight into the PPC. But I need to check. Otherwise a null-modem will need to be employed.
Due to the far range of options, we will not be supplying a serial cable to go between our interface and the computer. We will however publish recommended part numbers. What we will provide will include the interface unit, and the correct cable meeting to plug into the vehicles ODBII port.
I hope that adequatley answers your questions.
Cheers,
Hymee.
BTW - It also works on a Mazda 6. It should work on a Mazda 3 as well, and any other vehicle with a CAN-bus conforming to the ISO spec.
Our diagnostic interface will present itself as a male DB9 connector. To connect to a laptop with a serial "COM" port, you need a "crossed" DB9-DB9 (female-female) cable. These are often called "data transfer" or "null modem" cables. I have an off-the shelf "Belkin" brand part of which I can supply the part number.
For a laptop without a serial port, you need a USB - Serial adaptor. I have tested a number of units. Not all work. I have found a unit supplied by an international company that I recommend as "Hymee Approved", and one of these is already out in the field. You need to same serial cable as mentioned above.
For a PocketPC / XDA, since our unit presents itself as a standard DB9 serial connector, you need an appropriate serial cable for the unit you have. These are very model specific. These units normally present as a female DB9 connector, ready to plug straight into the back of a PC's COM port. I need to check specifically, but I am tending to think that since the serial cable to the PPC is already "crossed", then the cable will be able to plug straight into the PPC. But I need to check. Otherwise a null-modem will need to be employed.
Due to the far range of options, we will not be supplying a serial cable to go between our interface and the computer. We will however publish recommended part numbers. What we will provide will include the interface unit, and the correct cable meeting to plug into the vehicles ODBII port.
I hope that adequatley answers your questions.
Cheers,
Hymee.
BTW - It also works on a Mazda 6. It should work on a Mazda 3 as well, and any other vehicle with a CAN-bus conforming to the ISO spec.
Cheers,
Hymee.
#32
New Member
I will continue not to prove read my sentence before pushing the button. At least you can guess what I typed.
Lucky I have a typist at work and spell the words for me. ![Wink](https://www.rx8club.com/images/smilies/wink.gif)
Hey, you mention about the serial-USB adaptor for the scanner. My laptop and Palm (if you have this version in your development schedule), uses USB. How do I know which one you are talking about that works with the adaptor, the Hymee approved one? Compaq? Since they are sold to HP now. :p
Come to worse I have to spend a bit of money to get the Serial PCMA card, right? how much are they, roughly?
I just can't wait ....
![Smilie](https://www.rx8club.com/images/smilies/smile.gif)
![Wink](https://www.rx8club.com/images/smilies/wink.gif)
Hey, you mention about the serial-USB adaptor for the scanner. My laptop and Palm (if you have this version in your development schedule), uses USB. How do I know which one you are talking about that works with the adaptor, the Hymee approved one? Compaq? Since they are sold to HP now. :p
Come to worse I have to spend a bit of money to get the Serial PCMA card, right? how much are they, roughly?
I just can't wait ....
![Smilie](https://www.rx8club.com/images/smilies/smile.gif)
#33
Yo can yous a PCMCIA cerd if yu wont two.
But I did say thet I recommend a spesific won. And it only costs $42 AUD.
The post actually explains the situation quite clearly. How about you read it again!
I glad you didunt type "I jast cun't wait" :p
Cheers,
Hymee.
But I did say thet I recommend a spesific won. And it only costs $42 AUD.
The post actually explains the situation quite clearly. How about you read it again!
I glad you didunt type "I jast cun't wait" :p
Cheers,
Hymee.
#35
No, it is not cable specific. It presents as a standard DB9 male connector that is RS232 (COM / serial) compliant.
The PDA/XDA's Palms etc are cable specific. But if they have the option to plug into a serial /DB9/RS232 then there is a manufacturer specific cable available from the manufacturer, and possible other 3rd party vendors.
The reason I specify a certain USB / Serial adaptor is that cheap ones don't work properly. I have found one that does work properly, and is not much dearer than a cheap one.
Cheers,
Hymee.
The PDA/XDA's Palms etc are cable specific. But if they have the option to plug into a serial /DB9/RS232 then there is a manufacturer specific cable available from the manufacturer, and possible other 3rd party vendors.
The reason I specify a certain USB / Serial adaptor is that cheap ones don't work properly. I have found one that does work properly, and is not much dearer than a cheap one.
Cheers,
Hymee.
Last edited by Hymee; 10-05-2004 at 02:04 AM.
#37
Registered User
Join Date: Jan 2002
Location: Brisvegas, Aust
Posts: 377
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by Hymee
No, it is [not] cable specific. It presents as a standard DB9 male connector that is RS232 (COM / serial) compliant.
![Frown](https://www.rx8club.com/images/smilies/frown.gif)
j/k I admire your patience.
#39
Registered
Join Date: May 2004
Location: Victoria, Australia
Posts: 89
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by Hymee
Yo can yous a PCMCIA cerd if yu wont two.
.................................................. ..........................
I glad you didunt type "I jast cun't wait" :p
Cheers,
Hymee.
.................................................. ..........................
I glad you didunt type "I jast cun't wait" :p
Cheers,
Hymee.
![EEK!](https://www.rx8club.com/images/smilies/eek.gif)
![EEK!](https://www.rx8club.com/images/smilies/eek.gif)
![EEK!](https://www.rx8club.com/images/smilies/eek.gif)
![EEK!](https://www.rx8club.com/images/smilies/eek.gif)
![EEK!](https://www.rx8club.com/images/smilies/eek.gif)
Naughty Hymee, Naughty!! :p :D
![Wink](https://www.rx8club.com/images/smilies/wink.gif)
No need to call Taka names, he was only asking a question.
#44
RX-8 wannabe no more
Join Date: Jan 2004
Location: Brisbane, Sunny Queensland, Australia
Posts: 233
Likes: 0
Received 0 Likes
on
0 Posts
Damn,
This RX-8 owning business is going to get expensive.....when I eventually get one (early 2005 now looks likely)
Little matter of new RX-8 Luxury Pack + extras
Then my insurance doubling - at least (compared to Mazda SP20)
Increased fuel consumption
Hymee Grill (Sorry Hymee exhaust will have to wait)
And now I'll need to get a PPC to collect all my data.......
Anyway looks very good so far. As a local I'll be happy to test once I've got the appropriate accessories (including RX-8).
This RX-8 owning business is going to get expensive.....when I eventually get one (early 2005 now looks likely)
Little matter of new RX-8 Luxury Pack + extras
Then my insurance doubling - at least (compared to Mazda SP20)
Increased fuel consumption
Hymee Grill (Sorry Hymee exhaust will have to wait)
And now I'll need to get a PPC to collect all my data.......
Anyway looks very good so far. As a local I'll be happy to test once I've got the appropriate accessories (including RX-8).
#46
Registered User
Join Date: Oct 2003
Location: Kariong near Gosford NSW
Posts: 92
Likes: 0
Received 0 Likes
on
0 Posts
![Thumbs up](https://www.rx8club.com/images/icons/icon14.gif)
Thanks Hymee,
Yep the serial sync cable for the XDAII should do the trick and is available online at:
myxda.com/web/template/ShopItemDetail.vm?shop_item_name=XIISerialCable
Yes it does present as Female DB9 connector, and almost definitely would be already "crossed".
So I will be looking forward to the release of the unit and software, and the final cost.
Cheers,
Tony
Yep the serial sync cable for the XDAII should do the trick and is available online at:
myxda.com/web/template/ShopItemDetail.vm?shop_item_name=XIISerialCable
Yes it does present as Female DB9 connector, and almost definitely would be already "crossed".
So I will be looking forward to the release of the unit and software, and the final cost.
Cheers,
Tony
Originally Posted by Hymee
Tony,
That is a good question. Here is what I replied on another thread...
The full thread is here https://www.rx8club.com/showthread.php?t=39583
Cheers,
Hymee.
That is a good question. Here is what I replied on another thread...
The full thread is here https://www.rx8club.com/showthread.php?t=39583
Cheers,
Hymee.
#47
RX-8 wannabe no more
Join Date: Jan 2004
Location: Brisbane, Sunny Queensland, Australia
Posts: 233
Likes: 0
Received 0 Likes
on
0 Posts
Holy Thread Resurrection
Sorry for raising this from the Dead....
Just thought I would point out for anyone looking for a reasonably priced Pocket PC PDA - Dell are having a clear out of their Axim - X30 PDA's - starting at $255.20 (including delivery) without Wireless or $331.10 with Wireless.
Running until 29 October.
http://www1.ap.dell.com/content/prod..._au&l=en&s=dhs
Just thought I would point out for anyone looking for a reasonably priced Pocket PC PDA - Dell are having a clear out of their Axim - X30 PDA's - starting at $255.20 (including delivery) without Wireless or $331.10 with Wireless.
Running until 29 October.
http://www1.ap.dell.com/content/prod..._au&l=en&s=dhs
#49
Registered User
Join Date: Aug 2004
Location: Canberra Australia
Posts: 68
Likes: 0
Received 0 Likes
on
0 Posts
Kiwi, thanks for the Dell information. Looks like a good value deal and I've placed an order -- regret that the Dell pda doesn't have a serial port so the serial-USB adaptor that Hymee was talking about will be necessary to use his scan tool.
There's nothing like a challenge, or two!!
There's nothing like a challenge, or two!!
![Frown](https://www.rx8club.com/images/smilies/frown.gif)
![Frown](https://www.rx8club.com/images/smilies/frown.gif)
#50
Registered
Join Date: Aug 2003
Location: Brisbane, Australia
Posts: 1,459
Likes: 0
Received 0 Likes
on
0 Posts
The USB to serial adapter Hymee has previously mentioned will not work with the Dell Axim X30. There are converters available from the looks of it such as the one here: http://www.yourmobiledesk.com/produc...fm?prodID=4973
Alternatively you could use a serial to bluetooth adapter but these are even more expensive (around US$169).
The project is far from dead... there is some really cool stuff coming together at the moment, hopefully some pics soon.
Alternatively you could use a serial to bluetooth adapter but these are even more expensive (around US$169).
The project is far from dead... there is some really cool stuff coming together at the moment, hopefully some pics soon.