Notices
Australia/New Zealand Forum They come from The Land Down Under.

Contacting Malcolm Gough CEO MAZDA

Thread Tools
 
Search this Thread
 
Rate Thread
 
Old 08-11-2003 | 05:19 PM
  #1  
Lock & Load's Avatar
Thread Starter
Banned
 
Joined: Mar 2003
Posts: 3,535
Likes: 2
From: Gold Coast Australia
Thumbs up Contacting Malcolm Gough CEO MAZDA

I have written to the CEO of mazda australia letting him know of the varies threads relating to the power output fiasco , maybe he can shed some light on this issue , i felt that they should be aware of possibel negative press that will effect sales of the rx8 if its not cleared up .
Old 08-11-2003 | 10:14 PM
  #2  
simondebbie's Avatar
Registered User
 
Joined: Jun 2003
Posts: 60
Likes: 0
From: Melbourne, Australia
Thumbs up

Good work, look forward to the reply,

Has anyone put one of the Oz cars on a dyno yet?
Old 08-11-2003 | 10:15 PM
  #3  
ZAP-13B's Avatar
Registered User
 
Joined: Aug 2003
Posts: 7
Likes: 0
From: Melbourne, Australia
Mazda Australia are full of dick heads. I mean you hear it all the time.

Great product, rotten company.

Mazda America & Mazda Japan are fine, its just the Aussie company.

They are full of ******* that think they are above everybody & its actually them doing you the service. I dont live far from the head office (I'm near Ferntree Gully) & still wouldn't walk in there as I know what the attitude is like.

I have written to Big Mal before & never gotten a response so all I can say is best of luck but dont hold your breath.
Old 08-12-2003 | 09:29 AM
  #4  
mktchin's Avatar
Registered User
 
Joined: Jul 2003
Posts: 92
Likes: 0
From: Australia
the US thread on running a rx-8 on a dyno has come to a consensus that you shouldn't do it until 4000mi has been clocked up. apparently, a guy from mazda japan's engineering warned against it until 4000mi. something to do with the engine management running a run setting on the engine. they say that it will switch to the normal mixture after 4000mi and will be at rated power output.

any thoughts on this?

also my brother (donaldc) got hold of the mazda australia rx-8 promotional cd. quite interesting stuff on it. the car has tyre pressure sensors. also an auxillary air intake that opens up after 7.5k on the tach. i didn't know half of these features. i better watch the whole cd.

mike
Old 08-12-2003 | 06:20 PM
  #5  
Lock & Load's Avatar
Thread Starter
Banned
 
Joined: Mar 2003
Posts: 3,535
Likes: 2
From: Gold Coast Australia
mktchin , i have read the thread relating to dyno ing the rx8 only after x amount of miles .

Surely if that was causing the lower output situation why dont mazda head office officially come out and make such a statement , it should be left to one of its enginners to veryfy this important bit of information .

The longer mazda stays silent on this issue the harder it becomes for anyone to believe that they are credible .

SO COME ON MAZDA GET OF YOUR ASSES AND CLEAR UP THIS ISSUE.
Old 08-13-2003 | 06:02 AM
  #6  
Hymee's Avatar
Race Steward
iTrader: (1)
 
Joined: Aug 2003
Posts: 5,430
Likes: 2
From: Brisbane, Australia
I drove the same demo on 3 separate occasions. The last time I drove it it seemed really down on SOP power. It had about 900km by then. But my wife reckoned it was quicker than my soon to be 'ex' SS (235rwkW).

Cheers,
Hymee.
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
dmengel
RX-8 Parts For Sale/Wanted
10
02-16-2016 10:47 PM
akagc
RX-8's For Sale/Wanted
7
08-11-2015 08:07 PM



You have already rated this thread Rating: Thread Rating: 0 votes,  average.

Quick Reply: Contacting Malcolm Gough CEO MAZDA



All times are GMT -5. The time now is 11:48 AM.