dodgy brakessssss
#26
i have a black car and it sqeels nlike anything especially when it is hot
i'm going to see if mazda are going to do something about it. The thing with service departments is that they try to delay things as much as possible
i'm going to see if mazda are going to do something about it. The thing with service departments is that they try to delay things as much as possible
#27
Registered
Join Date: Aug 2003
Location: Brisbane, Australia
Posts: 1,459
Likes: 0
Received 0 Likes
on
0 Posts
I'm now suffering from the squeeky brake problem.. well the car is, and so are my ears. Was going to wait until my next service, but now I'm not sure if I can continue to put up with it. Might be a chance to get the PCM flash update as well.
Did you end up getting your pads replaced under warranty 18jambo74?
Did you end up getting your pads replaced under warranty 18jambo74?
#29
rev it up
18jambo74
You did well. Which dealer did you go to get these new pads. Grand Prix told me that I needed to brake harder and I wont get the squeal.
It works but not very comfortable as you have to brake hard for this to work. They reckon this will take the varnish off the pads.
Reguardless to say I am not happy with the explaination
skc
You did well. Which dealer did you go to get these new pads. Grand Prix told me that I needed to brake harder and I wont get the squeal.
It works but not very comfortable as you have to brake hard for this to work. They reckon this will take the varnish off the pads.
Reguardless to say I am not happy with the explaination
skc
#30
happy rotoring
Join Date: Feb 2004
Location: NICHOLASVILLE, KY
Posts: 134
Likes: 0
Received 0 Likes
on
0 Posts
i have had my mazda dealer perform both brake tsb's and mine are still squelling at the end of my braking right before i come to a complete stop. plan on ordering axis ultimate pads for the front and brembos slotted and cross drilled rotors. im also trying to get a replacement caliper that fits the stock rotors.
#31
Registered
Join Date: Aug 2003
Location: Brisbane, Australia
Posts: 1,459
Likes: 0
Received 0 Likes
on
0 Posts
I've stomped on mine a few times to see if that fixes but that doesn't seem to help. Thanks for the comments skc -- I was going to go to Aspley to get it fixed, but maybe I need to try somewhere else. Did you show Aspley the TSB?
#33
Registered User
Join Date: Oct 2004
Location: Burpengary, Qld
Posts: 112
Likes: 0
Received 0 Likes
on
0 Posts
SKC
The dealer was Eagers at Newstead, they did not have a problem with replacing the pads.
The dealer was Eagers at Newstead, they did not have a problem with replacing the pads.
Originally Posted by skc
18jambo74
You did well. Which dealer did you go to get these new pads. Grand Prix told me that I needed to brake harder and I wont get the squeal.
It works but not very comfortable as you have to brake hard for this to work. They reckon this will take the varnish off the pads.
Reguardless to say I am not happy with the explaination
skc
You did well. Which dealer did you go to get these new pads. Grand Prix told me that I needed to brake harder and I wont get the squeal.
It works but not very comfortable as you have to brake hard for this to work. They reckon this will take the varnish off the pads.
Reguardless to say I am not happy with the explaination
skc
#34
rev it up
sco
I have not shown them the TSB.
See how you go. I will print the TSB and see if it works next time. If we both put preassure in the Aspley dealer then they may start looking at fixing the problem. May be mention thet Eagers have fixed this problem for one of the forum members :p
skc
I have not shown them the TSB.
See how you go. I will print the TSB and see if it works next time. If we both put preassure in the Aspley dealer then they may start looking at fixing the problem. May be mention thet Eagers have fixed this problem for one of the forum members :p
skc
Thread
Thread Starter
Forum
Replies
Last Post
Monkeynuts85
New Member Forum
23
03-04-2020 11:50 PM
SiNfidelity
Good Guy/Bad Guy
3
07-27-2014 08:44 AM
MauiMazda2
Series I Trouble Shooting
3
06-21-2014 12:59 AM