Installing Hymee's kit today (15/11) - help wanted!
11-14-2003, 04:23 PM
#1
Registered User
Thread Starter
Join Date: May 2003
Location: Sydney
Posts: 214
Likes: 0
Received 0 Likes
on
0 Posts
Installing Hymee's kit today (15/11) - help wanted!
Guys, I think I'll get into the install this morning...
I'm around Crows Nest... if anyone is interested in helping out or having a look at the mess I create of my car...email me at my home address.
Wish me luck!
I'm around Crows Nest... if anyone is interested in helping out or having a look at the mess I create of my car...email me at my home address.
Wish me luck!
11-14-2003, 08:40 PM
#2
Registered User
Thread Starter
Join Date: May 2003
Location: Sydney
Posts: 214
Likes: 0
Received 0 Likes
on
0 Posts
All done !
Great kit - Hymee.... now I can drive protected !
By the way... I found a dead bird jammed in against the main grill !
Just goes to show - if it had been a rock !!!
Great kit - Hymee.... now I can drive protected !
By the way... I found a dead bird jammed in against the main grill !
Just goes to show - if it had been a rock !!!
11-14-2003, 09:11 PM
#3
Registered User
Thread Starter
Join Date: May 2003
Location: Sydney
Posts: 214
Likes: 0
Received 0 Likes
on
0 Posts
Other comments...
- With the kit installed - it's really clear that the gap is an oversight in the design at the front.
- I painted over the tops of the screws with some black paint - makes them completely invisible from outside.
- With the kit installed - it's really clear that the gap is an oversight in the design at the front.
- I painted over the tops of the screws with some black paint - makes them completely invisible from outside.
11-14-2003, 09:17 PM
#4
Banned
Join Date: Mar 2003
Location: Gold Coast Australia
Posts: 3,535
Likes: 0
Received 2 Likes
on
2 Posts
Originally posted by msydd
All done !
Great kit - Hymee.... now I can drive protected !
By the way... I found a dead bird jammed in against the main grill !
Just goes to show - if it had been a rock !!!
All done !
Great kit - Hymee.... now I can drive protected !
By the way... I found a dead bird jammed in against the main grill !
Just goes to show - if it had been a rock !!!
mysdd
You give new meaning to hymees grilled roast , well done did anyone help you???
11-16-2003, 10:23 PM
#8
msydd,
Sorry I couldn't reply to now - but it looks like you got it done no problems at all! Great Stuff!
Kev,
I suppose you need to check for differences in the size of the lower opening. If the spoiler is something that just bolts on below the splitter, then I think you will be OK. Can you post photos?
pricer01 - the hardest thing at the moment is deciding how many I should make up this time!
Cheers,
Hymee.
Sorry I couldn't reply to now - but it looks like you got it done no problems at all! Great Stuff!
Kev,
I suppose you need to check for differences in the size of the lower opening. If the spoiler is something that just bolts on below the splitter, then I think you will be OK. Can you post photos?
pricer01 - the hardest thing at the moment is deciding how many I should make up this time!
Cheers,
Hymee.
11-17-2003, 03:06 AM
#9
Registered User
Join Date: Oct 2003
Location: Sydney, AUSTRALIA
Posts: 84
Likes: 0
Received 0 Likes
on
0 Posts
Hymee,
How about Bloody Heaps!
NO, in seriousness you know what the demand is so common sense will prevail, that is of course so long as you don't leave me out!:D (Former LS1 owner!)
Do you miss your V8 at all? I miss the sound of mine.
Joe
How about Bloody Heaps!
NO, in seriousness you know what the demand is so common sense will prevail, that is of course so long as you don't leave me out!:D (Former LS1 owner!)
Do you miss your V8 at all? I miss the sound of mine.
Joe
11-17-2003, 05:36 AM
#10
[rapidus octus]
Join Date: Aug 2003
Location: Sydney, Australia
Posts: 1,028
Likes: 0
Received 0 Likes
on
0 Posts
I think the street beat exhaust will be the solution!
When's a local tuner going to get serious about importing bits for the 8? I'd be tempted to import an exhaust system if I though I had a hope of it not getting bent, crushed or mistaken for a portable rocket launcher in an xray machine.
When's a local tuner going to get serious about importing bits for the 8? I'd be tempted to import an exhaust system if I though I had a hope of it not getting bent, crushed or mistaken for a portable rocket launcher in an xray machine.
11-17-2003, 04:05 PM
#12
[rapidus octus]
Join Date: Aug 2003
Location: Sydney, Australia
Posts: 1,028
Likes: 0
Received 0 Likes
on
0 Posts
Ah that's it, racing beat - not street beat. I got the beat right, must have stuffed the melody 
700 - wow, I suppose it's a sprint to a 1000 now. I don't think my poor old brain has another 300 thoughts in it.
700 - wow, I suppose it's a sprint to a 1000 now. I don't think my poor old brain has another 300 thoughts in it.
11-22-2003, 06:26 AM
#14
JoeD,
I miss the torque. But don't miss the rattle, the oil consumption, the weight...
I should be able top go and get the materials this week and crank up the production line again!
Just a very gentle reminder, in little letters, and not directed at anyone...
This forum is not a post race, unless of course the posts add value to the discussion, and are on topic.
If you wan't to have general chat, how about using an IRC channel?
And no - I am not grumpy cause England finally scored a try.
Just doin my 'job'.
Cheers guys!
Hymee.
:D
PS - I think L&L should see Dr. Takahasi for the treatment of Yellow Feaver.
I miss the torque. But don't miss the rattle, the oil consumption, the weight...
I should be able top go and get the materials this week and crank up the production line again!
Just a very gentle reminder, in little letters, and not directed at anyone...
This forum is not a post race, unless of course the posts add value to the discussion, and are on topic.
If you wan't to have general chat, how about using an IRC channel?
And no - I am not grumpy cause England finally scored a try.
Just doin my 'job'.Cheers guys!
Hymee.
:D
PS - I think L&L should see Dr. Takahasi for the treatment of Yellow Feaver.
11-23-2003, 09:26 AM
#15
abcdefghwakeupneostuvwxyz
Join Date: Oct 2003
Location: Mosman, Sydney, Australia
Posts: 414
Likes: 0
Received 0 Likes
on
0 Posts
msydd:
rob and I would probably ( sorry Rob, I'm assuming a lot here on your behalf ) put on all the beers and pizza it would take to engage your help as a hands on expert now on the Hymee install manouver if we can get kits down to sydney from the next batch ( Hymee - you up for bribes to shunt up the list ? * grin * ).
I 2nd the call for pix if you have time.
All those in favour.. aw heck, ay...
++dez;
rob and I would probably ( sorry Rob, I'm assuming a lot here on your behalf ) put on all the beers and pizza it would take to engage your help as a hands on expert now on the Hymee install manouver if we can get kits down to sydney from the next batch ( Hymee - you up for bribes to shunt up the list ? * grin * ).
I 2nd the call for pix if you have time.
All those in favour.. aw heck, ay...
++dez;
11-23-2003, 09:16 PM
#16
Originally posted by Dez
msydd:
rob and I would probably ( sorry Rob, I'm assuming a lot here on your behalf ) put on all the beers and pizza it would take to engage your help as a hands on expert now on the Hymee install manouver if we can get kits down to sydney from the next batch ( Hymee - you up for bribes to shunt up the list ? * grin * ).
I 2nd the call for pix if you have time.
All those in favour.. aw heck, ay...
++dez;
msydd:
rob and I would probably ( sorry Rob, I'm assuming a lot here on your behalf ) put on all the beers and pizza it would take to engage your help as a hands on expert now on the Hymee install manouver if we can get kits down to sydney from the next batch ( Hymee - you up for bribes to shunt up the list ? * grin * ).
I 2nd the call for pix if you have time.
All those in favour.. aw heck, ay...
++dez;
Hehehe.
11-25-2003, 08:30 AM
#18
abcdefghwakeupneostuvwxyz
Join Date: Oct 2003
Location: Mosman, Sydney, Australia
Posts: 414
Likes: 0
Received 0 Likes
on
0 Posts
Hell, if you're serious - quite a lot of pizza and JD I'd say, I don't drink as such but I'm willing to start * hee hee *
I've just posted my request off for the kit ( thanks hymee ) - so I'll be in need of some real help.
As I've said before, if it's a 1RU or 2RU 19" rack mount I'm right at home, but the front end of my 8, well it's the front end .. I know that might!
++dez;
ps: what's your passion - gormet, the hutt, domino's, pino's or maralina's famous by the way?
I've just posted my request off for the kit ( thanks hymee ) - so I'll be in need of some real help.
As I've said before, if it's a 1RU or 2RU 19" rack mount I'm right at home, but the front end of my 8, well it's the front end .. I know that might!
++dez;
ps: what's your passion - gormet, the hutt, domino's, pino's or maralina's famous by the way?
11-25-2003, 01:35 PM
#19
Mmm,
Don't know about pino's or maralina's, but willing to sample. Partial to Eagle Boys or Pizza Haven of late.
I'm not a big drinker, but since I had a tour of the JD distillery, Lynchburg TN, I am pretty hooked. Imagine what I would be like if I had a tour of the Mazda factory
Cheers,
Hymee.
Don't know about pino's or maralina's, but willing to sample
. Partial to Eagle Boys or Pizza Haven of late.I'm not a big drinker, but since I had a tour of the JD distillery, Lynchburg TN, I am pretty hooked. Imagine what I would be like if I had a tour of the Mazda factory
Cheers,
Hymee.
11-25-2003, 03:15 PM
#20
Registered User
Thread Starter
Join Date: May 2003
Location: Sydney
Posts: 214
Likes: 0
Received 0 Likes
on
0 Posts
Dez, let me know when you're planning the install and if I can I'm happy to come and lend a hand !
I'm not a mechanical genius either... but having done it once will definitely help.
I'm also not a big drinker... but the pizza sounds good!
I'm not a mechanical genius either... but having done it once will definitely help.
I'm also not a big drinker... but the pizza sounds good!
11-26-2003, 02:54 AM
#21
Registered User
Join Date: Oct 2003
Location: Sydney, Australia
Posts: 127
Likes: 0
Received 0 Likes
on
0 Posts
Dez, msydd, and Hymee,
Would there be space for one more Winning Blue to join the installation squad? I'll match Dez's Pizza & JD supplies so you won't go hungry nor dry!
I just don't have the confidence of dismantling that awesome RX8 face - but I'll happily attack any of your racks Dez!
Pappy
Would there be space for one more Winning Blue to join the installation squad? I'll match Dez's Pizza & JD supplies so you won't go hungry nor dry!
I just don't have the confidence of dismantling that awesome RX8 face - but I'll happily attack any of your racks Dez!
Pappy
11-26-2003, 06:28 AM
#22
Sydney dudes...
I have been tossing the idea around with Dez that I could come to Sydney for the weekend (+ some), bring my Wife + 2 for a small holiday, spend some time RX-8'ing and spending a afternoon/evening doing a few grills. If there was a few of you willing to chip in for my flight, and help with accomodation, in lieu of a fitting fee, then we could hatch a plan.
Wadya reckon?
Cheers,
Hymee.
I have been tossing the idea around with Dez that I could come to Sydney for the weekend (+ some), bring my Wife + 2 for a small holiday, spend some time RX-8'ing and spending a afternoon/evening doing a few grills. If there was a few of you willing to chip in for my flight, and help with accomodation, in lieu of a fitting fee, then we could hatch a plan.
Wadya reckon?
Cheers,
Hymee.
11-26-2003, 07:00 AM
#23
[rapidus octus]
Join Date: Aug 2003
Location: Sydney, Australia
Posts: 1,028
Likes: 0
Received 0 Likes
on
0 Posts
Originally posted by Hymee
Sydney dudes...
I have been tossing the idea around with Dez that I could come to Sydney for the weekend (+ some), bring my Wife + 2 for a small holiday, spend some time RX-8'ing and spending a afternoon/evening doing a few grills. If there was a few of you willing to chip in for my flight, and help with accomodation, in lieu of a fitting fee, then we could hatch a plan.
Wadya reckon?
Cheers,
Hymee.
Sydney dudes...
I have been tossing the idea around with Dez that I could come to Sydney for the weekend (+ some), bring my Wife + 2 for a small holiday, spend some time RX-8'ing and spending a afternoon/evening doing a few grills. If there was a few of you willing to chip in for my flight, and help with accomodation, in lieu of a fitting fee, then we could hatch a plan.
Wadya reckon?
Cheers,
Hymee.
11-26-2003, 10:19 AM
#25
abcdefghwakeupneostuvwxyz
Join Date: Oct 2003
Location: Mosman, Sydney, Australia
Posts: 414
Likes: 0
Received 0 Likes
on
0 Posts
you know I'm in..
check dates, available flights etc, and costs, I'll more than gladly ante up my fair share, and then some if need be.
pappy
jaceey
kev
pricer01 ( rob! )
takana
msydd
winning
dez ( thats me )
I'm sure we're all into the idea of a f2f to meet y'all and I'd like to think we're all up for a slice of the round trip and accom if only to pay homage * grin * for the now infamous Hymee's Bar and Grill kit or to do a group install / review / brag about doing it yourself [ homage to msydd ].
I'd take ( + some ) days off from the office too if only for more drive time!
bit of a roll call there for your PM list's kids.
++dez;
check dates, available flights etc, and costs, I'll more than gladly ante up my fair share, and then some if need be.
pappy
jaceey
kev
pricer01 ( rob! )
takana
msydd
winning
dez ( thats me )
I'm sure we're all into the idea of a f2f to meet y'all and I'd like to think we're all up for a slice of the round trip and accom if only to pay homage * grin * for the now infamous Hymee's Bar and Grill kit or to do a group install / review / brag about doing it yourself [ homage to msydd ].
I'd take ( + some ) days off from the office too if only for more drive time!
bit of a roll call there for your PM list's kids.
++dez;