Nankang 245's fitted
#1
NT Rotorhead
Thread Starter
Join Date: Aug 2003
Location: Katherine, NT
Posts: 746
Likes: 0
Received 0 Likes
on
0 Posts
Nankang 245's fitted
Well I went for it and fitted some Nankang 245/40-R18's yesterday. $210 each.
I haven't really done any hard driving on them yet, but on initial impressions, they seem fine. Mind you, all I have to compare them to are the bald Potenza's they replaced. They are a comfortable ride and very quiet to drive on. I'll keep you all updated as I get used to them some more.
Only one thing caught me out when I bought them. When the tyres turned up at the shop, I found out that they were rated 97H, not 97W like I saw on the website. H tyres are rated to 210km/h, W's are rated to 270km/h. When I asked how much and how long for the 97W's, I was told that they were $275 each and would have to come from interstate. I 'ummed and 'arred for a few minutes, but in the end decided to go with the 97H's. I guess I'll just have to avoid any abrupt manoeuvring above 210km/h.
We'll see if you get what you pay for. I guess they only have to last half as long to get my money's worth....
I haven't really done any hard driving on them yet, but on initial impressions, they seem fine. Mind you, all I have to compare them to are the bald Potenza's they replaced. They are a comfortable ride and very quiet to drive on. I'll keep you all updated as I get used to them some more.
Only one thing caught me out when I bought them. When the tyres turned up at the shop, I found out that they were rated 97H, not 97W like I saw on the website. H tyres are rated to 210km/h, W's are rated to 270km/h. When I asked how much and how long for the 97W's, I was told that they were $275 each and would have to come from interstate. I 'ummed and 'arred for a few minutes, but in the end decided to go with the 97H's. I guess I'll just have to avoid any abrupt manoeuvring above 210km/h.
We'll see if you get what you pay for. I guess they only have to last half as long to get my money's worth....
#2
Banned
Join Date: Mar 2003
Location: Gold Coast Australia
Posts: 3,535
Likes: 0
Received 2 Likes
on
2 Posts
I was lucky enough to pick up a set of the original tyres from rotaryenvy with 9000km on them for a reasonable price :D otherwise i was contemplating getting the Nankangs , they certainly look the part keep us posted of your findings
cheers
michael
cheers
michael
#3
Registered User
Join Date: Aug 2003
Location: Brisbane Australia
Posts: 778
Likes: 0
Received 0 Likes
on
0 Posts
The pragmatist in me says that my car will never see speeds of over 120km/h (allowing for overtaking), so a maximum rating of 210 km/h seems fine for me. Wildcard, it would be great if you could report back on an occasional basis as to how they're running. These sorts of threads prove the value of the forum!
#4
New Member
It is much better than what you think
H rated mean they have to sustain a certain load and certain distance at that speed before disintegrate.
But they do not test any grip or performance in this speed.
So bottom line - doesn't matter, it does not mean anything. Of course, Z tyre will generally better than the H rated tyres.
H rated mean they have to sustain a certain load and certain distance at that speed before disintegrate.
But they do not test any grip or performance in this speed.
So bottom line - doesn't matter, it does not mean anything. Of course, Z tyre will generally better than the H rated tyres.
#6
NT Rotorhead
Thread Starter
Join Date: Aug 2003
Location: Katherine, NT
Posts: 746
Likes: 0
Received 0 Likes
on
0 Posts
^^ I don't know if they'd be smart enough to check. They almost didn't pay last time because my tyres were right up to the wear markers.
The guy in the tyre shop told me that the load rating (97) was more important than the speed rating (H/W).
The guy in the tyre shop told me that the load rating (97) was more important than the speed rating (H/W).
#7
Race Steward
iTrader: (1)
Now that would be an ironic situation...
Case A... Insurance company refuses claim cause of an accident sustained on a track at 110km/h (which is max legal highway speed) on Z rated tyres.
Case B... Insurance company refuses claim of an accident sustained on a highway at 110km/h on "H" (210km/hr) rated tyres, cause the placard says 270 are needed
I'd have to think you were in the clear on that, Wildcard.
As for grip, I just checked wifies Nankangs, and the traction rating was "A" whereas the Yoko's are "AA". But on the flip side, the Nankangs are a "240" wear rating, and the Yoko's are "180".
I suppose one just must accept that these 2 features of a tyre are directly inversely related.
I wish I had given the Nankangs a go. Time will tell.
Cheers,
Hymee.
Case A... Insurance company refuses claim cause of an accident sustained on a track at 110km/h (which is max legal highway speed) on Z rated tyres.
Case B... Insurance company refuses claim of an accident sustained on a highway at 110km/h on "H" (210km/hr) rated tyres, cause the placard says 270 are needed
I'd have to think you were in the clear on that, Wildcard.
As for grip, I just checked wifies Nankangs, and the traction rating was "A" whereas the Yoko's are "AA". But on the flip side, the Nankangs are a "240" wear rating, and the Yoko's are "180".
I suppose one just must accept that these 2 features of a tyre are directly inversely related.
I wish I had given the Nankangs a go. Time will tell.
Cheers,
Hymee.
Last edited by Hymee; 03-07-2005 at 03:58 AM.
#8
NT Rotorhead
Thread Starter
Join Date: Aug 2003
Location: Katherine, NT
Posts: 746
Likes: 0
Received 0 Likes
on
0 Posts
Update....
After a few more days behind the wheel, the tyres are performing well. No regrets so far. I haven't been out in the wet yet, so that will be the next test.
After a few more days behind the wheel, the tyres are performing well. No regrets so far. I haven't been out in the wet yet, so that will be the next test.
#10
Race Steward
iTrader: (1)
A mate of mine with a supercharged (Eaton) Monaro was speaking very highly of them today....
Cheers,
Hymee.
I recently changed my 245/35 Wanli's on the rear to some 265/30 Nankang NS2's. I can't believe how well the Nangkangs hold on. With the Wanli's squeezing it on in the wet in 4th and sometimes 5th at 100kph would result in wheelspin city, now with the Nangkangs I give stand on it in 3rd at a 100 and it just takes off with no wheelspin. Most times......
For $285 for a 265/30 19, I just had to give them a go and have been very pleasently surprised. I now just have to save up and put them on the front as well. I still have the Wanli's on the front and the understeer in the wet is bordering on rediculous.
Hymee.
#15
Registered User
Join Date: Aug 2003
Location: Melbourne Australia
Posts: 33
Likes: 0
Received 0 Likes
on
0 Posts
Fitted 4 x Nankang NS2's myself yesterday at $220 each fitted and balanced. Immediate impression is quite ride. No rain yet but will post in a couple more weeks. Cannot beat that price though!
Originals lasted 38k.
Originals lasted 38k.
#16
New Member
南港輪胎
Nice to see you there japfan!
Can't wait for your comment on this tyres. What size did you get? I wonder if it has 255/40-18
I found out their Chinese name in their Taiwanese website... it is actually cool to have some chinese on your car hehe.
南港輪胎
Can't wait for your comment on this tyres. What size did you get? I wonder if it has 255/40-18
I found out their Chinese name in their Taiwanese website... it is actually cool to have some chinese on your car hehe.
南港輪胎
Last edited by takahashi; 04-22-2005 at 12:29 AM. Reason: Add some chinese hehe
#17
車の性能の違いが戦力の決定的差ではない ということを
Join Date: Jan 2004
Location: Taiwan
Posts: 114
Likes: 0
Received 0 Likes
on
0 Posts
I'm surprised at you guys use nankang tires. In Taiwan, people drive a sport car with nankang tires usually for one reason : Its price is low compared with other imported tires. The other possible reason is: He would drive his car for drifting. In this condition, the grip of tires should be lower.
Last edited by zaku; 04-22-2005 at 10:37 AM.
#18
New Member
Well I suspect this is the reason for me if i change to Nankang too CHEAP :D
I am thinking that it is a waste to drive in Michellin since I don't fang with this tyre. I will have a semislick for track .
Just to see if it is safe. I guess if it meets Australian standard it has to be alright.
I am thinking that it is a waste to drive in Michellin since I don't fang with this tyre. I will have a semislick for track .
Just to see if it is safe. I guess if it meets Australian standard it has to be alright.
#20
New Member
fang = driving safely and slowly, NOT :D. I only "fang" on the track, not on public road. Although this word typically assciated with "hoons" doing 120 in the 60 industrial zone in Friday/Saturday nights
#22
Registered User
Join Date: Aug 2004
Location: brisbane QLD
Posts: 101
Likes: 0
Received 0 Likes
on
0 Posts
I got my tyres fitted today and I used Nankang 245's as well and I got the same story as you did Wildcard. What I did though was I rang my insurance company, AAMI (free plug) and they were fine with the load rating (97H) on the new tyres. I did tell them what the size and rating of the originals were. All they said was as long as the tyres were all the same size and they noted it on the policy that it didn't matter. Iasked her to send an ammendment to me to verify this.
SWEET...... :D
SWEET...... :D
#25
Registered User
Join Date: Aug 2004
Location: brisbane QLD
Posts: 101
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by Scotty
What size, how much and where from?
And how many km's did you get on the original tyres?
(sorry for all the questions) :-)
And how many km's did you get on the original tyres?
(sorry for all the questions) :-)
They were 245x40x18 97H, $205 fitted in Brissy.
I got 38,000 from my originals....although only just.
cheers,
rx88er
When's the next cruise day Hymee?