Red Brake Caliper
#1
fair play~
Thread Starter
Join Date: Dec 2003
Location: Sydney
Posts: 593
Likes: 0
Received 0 Likes
on
0 Posts
Red Brake Caliper
I finally got around to paint those plain looking standard calipers yesterday after thinking about it over a year
it ended up being more work than I initially thought but luckily one of my helped me out with it (did most of the work :D )
you are looking to spend a whole afternoon for the work.
the results are simply amazing. I used brake caliper spray paint from VHT which is about $20 from Repco.
here is some pictures up for your viewing pleasures~
![EEK!](https://www.rx8club.com/images/smilies/eek.gif)
it ended up being more work than I initially thought but luckily one of my helped me out with it (did most of the work :D )
you are looking to spend a whole afternoon for the work.
the results are simply amazing. I used brake caliper spray paint from VHT which is about $20 from Repco.
here is some pictures up for your viewing pleasures~
Last edited by playa78; 08-28-2005 at 02:23 AM.
#5
cry me a river...
Join Date: Dec 2003
Location: Syd / Melb
Posts: 4,475
Likes: 0
Received 0 Likes
on
0 Posts
that looks great!
that should give taka & co. the inspirations :D
maybe do a quick write up for those willing to give it a go and close up pix please...
ps... hope you have done the rear ones :D
that should give taka & co. the inspirations :D
maybe do a quick write up for those willing to give it a go and close up pix please...
ps... hope you have done the rear ones :D
#7
fair play~
Thread Starter
Join Date: Dec 2003
Location: Sydney
Posts: 593
Likes: 0
Received 0 Likes
on
0 Posts
i was going to do the front and do the rear next week, since I had only two jacks, but one of my friend lent me additional jack so ended up doing all four.
I don't think I could have done it again next week. it's fair bit of work![Frown](https://www.rx8club.com/images/smilies/frown.gif)
you first have to clean out the brake dust with metal brush by scrubbing scrubbing and scrubbing..
and then clean it with degreaser.
dry it clean.
have newspapers covering all bits.
spray.
wait till it dries.
spray 2nd coat.
let it dry again.
put the brake pads back in.
put the wheels back in.
I don't think I could have done it again next week. it's fair bit of work
![Frown](https://www.rx8club.com/images/smilies/frown.gif)
you first have to clean out the brake dust with metal brush by scrubbing scrubbing and scrubbing..
and then clean it with degreaser.
dry it clean.
have newspapers covering all bits.
spray.
wait till it dries.
spray 2nd coat.
let it dry again.
put the brake pads back in.
put the wheels back in.
#8
fair play~
Thread Starter
Join Date: Dec 2003
Location: Sydney
Posts: 593
Likes: 0
Received 0 Likes
on
0 Posts
i have put up more pics here if anyone wants to see more.
http://spaces.msn.com/members/playa7...m&_c02_owner=1
scroll all the way to the right
http://spaces.msn.com/members/playa7...m&_c02_owner=1
scroll all the way to the right
![Smilie](https://www.rx8club.com/images/smilies/smile.gif)
#9
Shootin' from the hip
Join Date: Apr 2005
Location: Sydney, Australia
Posts: 7,584
Likes: 0
Received 0 Likes
on
0 Posts
Kewl!!!
Mate, that's an impressive array pf piccies you have in msn. Sure hope you don't document other, ahem, features of your life in the same painstaking fashion!
:D :D
![Cool](https://www.rx8club.com/images/smilies/cool.gif)
Mate, that's an impressive array pf piccies you have in msn. Sure hope you don't document other, ahem, features of your life in the same painstaking fashion!
![Wink](https://www.rx8club.com/images/smilies/wink.gif)
#13
fair play~
Thread Starter
Join Date: Dec 2003
Location: Sydney
Posts: 593
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by Muzz
I'd like to do this myself.
Having trouble choosing a colour.
What's best for a black? I am actually leaning towards...black.
Having trouble choosing a colour.
What's best for a black? I am actually leaning towards...black.
![Wink](https://www.rx8club.com/images/smilies/wink.gif)
or maybe gold? (which my friend did on his black integra and looks nice too :o )
#14
cry me a river...
Join Date: Dec 2003
Location: Syd / Melb
Posts: 4,475
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by playa78
i think red would still look great on black as well
or maybe gold? (which my friend did on his black integra and looks nice too :o )
![Wink](https://www.rx8club.com/images/smilies/wink.gif)
or maybe gold? (which my friend did on his black integra and looks nice too :o )
![Wink](https://www.rx8club.com/images/smilies/wink.gif)
#17
New Member
The matter of colour is not important.... Black and red is great - to match the AP racing brakes.
I will show you something in the other thread. Only if I have 900,000 Yen to spare :rolleye:
I will show you something in the other thread. Only if I have 900,000 Yen to spare :rolleye:
#18
i need a new photo
Join Date: Jun 2004
Location: Sydney
Posts: 1,013
Likes: 0
Received 0 Likes
on
0 Posts
Hey Playa
Been off air for ages!! Did mine about six months ago with the duplo brush version. Still looks mint! Definitely the cheapest tart up you can do, if it does take a day to do!
You need a couple of Polak's decals. He uses them as masks but mine have laste 3 months so far as stick on and look great.
Just put them on the front rather than both.
Well done, got the same shift boot as yours as well and that's also a nice cheap but classy addition.
Mike
Been off air for ages!! Did mine about six months ago with the duplo brush version. Still looks mint! Definitely the cheapest tart up you can do, if it does take a day to do!
You need a couple of Polak's decals. He uses them as masks but mine have laste 3 months so far as stick on and look great.
Just put them on the front rather than both.
Well done, got the same shift boot as yours as well and that's also a nice cheap but classy addition.
Mike
#19
fair play~
Thread Starter
Join Date: Dec 2003
Location: Sydney
Posts: 593
Likes: 0
Received 0 Likes
on
0 Posts
hey miker,
yeah I thought about those decal's initially.. but just ended up doing it without them for now.. do they stick ok? no problem with melting from brake calipers getting hot, spray from car wash etc? anyway, if I had ordered them with the shift boot it would have been good.. I don't want to end up paying for shipping everytime they fall off![Frown](https://www.rx8club.com/images/smilies/frown.gif)
yeah, no problems as yet with mine, and they do look great :D
love the shift boot. I took a risk getting the red one but so grateful i did.
it just brightened up the interior and makes it look so much classier then the old black one~
yeah I thought about those decal's initially.. but just ended up doing it without them for now.. do they stick ok? no problem with melting from brake calipers getting hot, spray from car wash etc? anyway, if I had ordered them with the shift boot it would have been good.. I don't want to end up paying for shipping everytime they fall off
![Frown](https://www.rx8club.com/images/smilies/frown.gif)
yeah, no problems as yet with mine, and they do look great :D
love the shift boot. I took a risk getting the red one but so grateful i did.
it just brightened up the interior and makes it look so much classier then the old black one~
#20
i need a new photo
Join Date: Jun 2004
Location: Sydney
Posts: 1,013
Likes: 0
Received 0 Likes
on
0 Posts
Mate PM me your address, I bought 4 stickies and have used 2. Thought i'd hang on to the others for replacements but they are hanging on pretty well so far. I've not blasted them directly but have had months of washing!
I'll post them too u, am in Melb next week!
If you're at the Nationals I'll scrounge a lap with you, will have to leave my baby in the shed in Auckland I'm afraid!
Cheers Mike
I'll post them too u, am in Melb next week!
If you're at the Nationals I'll scrounge a lap with you, will have to leave my baby in the shed in Auckland I'm afraid!
Cheers Mike
#21
Shootin' from the hip
Join Date: Apr 2005
Location: Sydney, Australia
Posts: 7,584
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by mikeyr
If you're at the Nationals I'll scrounge a lap with you, will have to leave my baby in the shed in Auckland I'm afraid!
If you can stand driving an 8 that isn't red you're welcome to borrow mine for some laps.
In my book anybody prepared to fly from NZ for the event deserves a favour!
![Smilie](https://www.rx8club.com/images/smilies/smile.gif)
Dave
#22
fair play~
Thread Starter
Join Date: Dec 2003
Location: Sydney
Posts: 593
Likes: 0
Received 0 Likes
on
0 Posts
hehe, me giving you a ride for a lap is no problem but it looks like we are not allowed to have passengers at the Nats.. I talked to the officials (Timbo, revolver) about bringing a friend so he can join me as the "navigator" but they advised me no due to legal and safety issues even if he wears helmet and pay..
![Frown](https://www.rx8club.com/images/smilies/frown.gif)
#24
Registered
iTrader: (3)
Join Date: Aug 2004
Location: chicago
Posts: 436
Likes: 0
Received 0 Likes
on
0 Posts
Wow that does look like a lot of work, especially sticking those papers all around the wheel. I just took off the whole caliper and painted it away from the car. This way I was positive that the whole caliper was painted, even the back. Taking the caliper off and putting it back on was a breeze. The only problem is that you may need another person to help you bleed the brakes.
#25
I hope it last a long time because some of the cars that i worked on, it either flaked off or some idiot decides to shoot brake cleaner on a painted caliper. good luck with the rear and hope it last
![Smilie](https://www.rx8club.com/images/smilies/smile.gif)