Review Hymee Enhanced Exhaust
#1
aka Smoothy
Thread Starter
Join Date: Jul 2003
Location: Brisbane Australia
Posts: 186
Likes: 0
Received 0 Likes
on
0 Posts
![Smile](https://www.rx8club.com/images/icons/icon7.gif)
I have recently got the stainless steel Hymee exhaust fitted to my car. The following are my thoughts on it.
These are my own views for what they are worth.
Steve
These are my own views for what they are worth.
Steve
#3
aka Smoothy
Thread Starter
Join Date: Jul 2003
Location: Brisbane Australia
Posts: 186
Likes: 0
Received 0 Likes
on
0 Posts
Gomez,
After you have really been giving it some you get some popping happening when you lift off the throttle. I took it to Smoothy's secret test track the other night to see if I could get some flames like some of the Americans have been able to. No luck. But it was fun trying!
After you have really been giving it some you get some popping happening when you lift off the throttle. I took it to Smoothy's secret test track the other night to see if I could get some flames like some of the Americans have been able to. No luck. But it was fun trying!
#4
Registered
Join Date: Aug 2003
Location: Brisbane, Australia
Posts: 1,459
Likes: 0
Received 0 Likes
on
0 Posts
Smoothy, I highly recommend a run through the ICB tunnel under the Brisbane Showgrounds with the windows down. Followed Hymee through this on the last drive day. One word for the sound.
Awesome
Awesome
#5
Race Steward
iTrader: (1)
Mine still pops and crackes (in the nicest kind of way!) with my new G tune.
Smoothies did have a pop on the overrun when he reved it before he backed out of the workshop. But who am I to say. I am biased.
Cheers,
Hymee.
Oh yeah, before I forget - that is a great informative post, Smoothy. Thanks!
I would highly recommend the WOT run under the Ekka! (Dont speed of course!!!!!)
Smoothies did have a pop on the overrun when he reved it before he backed out of the workshop. But who am I to say. I am biased.
Cheers,
Hymee.
Oh yeah, before I forget - that is a great informative post, Smoothy. Thanks!
I would highly recommend the WOT run under the Ekka! (Dont speed of course!!!!!)
#7
rock-->o<--hard place
Join Date: Sep 2003
Location: Canberra, AUSTRALIA
Posts: 3,242
Likes: 0
Received 0 Likes
on
0 Posts
Have just had mine fitted. A bit of a struggle as Mazda clearly employs former sumo wrestlers to tighten up the clamp from the pipe to the silencer :D My advice: unless you have oxy equipment, a hoist etc, get a professional to fit. Mine just charged an hour's labour -- $65.
Quality -- excellent. My exhaust fitter was really impressed. In fact he wants to stock some, so have put Hymee in touch.
Sound -- I heard Hymee's plus others (in fact, everyone else) at the Wakefield track day. Couldn't really tell much difference then. But the first time I revved it this morning, I had a momentary catch of breath. It is louder, but nice louder. Similar to stock (maybe deeper) plus additional volume and, best of all, an edgier, crisper tone.
On the road, windows up. Don't really notice until you bury the foot and hit 6000. Windows down, you can hear it. Lovely, but not OTT.
Now for the G flash!
Thanks Hymee
Quality -- excellent. My exhaust fitter was really impressed. In fact he wants to stock some, so have put Hymee in touch.
![Wink](https://www.rx8club.com/images/smilies/wink.gif)
Sound -- I heard Hymee's plus others (in fact, everyone else) at the Wakefield track day. Couldn't really tell much difference then. But the first time I revved it this morning, I had a momentary catch of breath. It is louder, but nice louder. Similar to stock (maybe deeper) plus additional volume and, best of all, an edgier, crisper tone.
On the road, windows up. Don't really notice until you bury the foot and hit 6000. Windows down, you can hear it. Lovely, but not OTT.
Now for the G flash!
Thanks Hymee
#9
Race Steward
iTrader: (1)
Originally posted by timbo
Have just had mine fitted. A bit of a struggle as Mazda clearly employs former sumo wrestlers to tighten up the clamp from the pipe to the silencer :D My advice: unless you have oxy equipment, a hoist etc, get a professional to fit. Mine just charged an hour's labour -- $65.
Quality -- excellent. My exhaust fitter was really impressed. In fact he wants to stock some, so have put Hymee in touch.
Sound -- I heard Hymee's plus others (in fact, everyone else) at the Wakefield track day. Couldn't really tell much difference then. But the first time I revved it this morning, I had a momentary catch of breath. It is louder, but nice louder. Similar to stock (maybe deeper) plus additional volume and, best of all, an edgier, crisper tone.
On the road, windows up. Don't really notice until you bury the foot and hit 6000. Windows down, you can hear it. Lovely, but not OTT.
Now for the G flash!
Thanks Hymee
Have just had mine fitted. A bit of a struggle as Mazda clearly employs former sumo wrestlers to tighten up the clamp from the pipe to the silencer :D My advice: unless you have oxy equipment, a hoist etc, get a professional to fit. Mine just charged an hour's labour -- $65.
Quality -- excellent. My exhaust fitter was really impressed. In fact he wants to stock some, so have put Hymee in touch.
![Wink](https://www.rx8club.com/images/smilies/wink.gif)
Sound -- I heard Hymee's plus others (in fact, everyone else) at the Wakefield track day. Couldn't really tell much difference then. But the first time I revved it this morning, I had a momentary catch of breath. It is louder, but nice louder. Similar to stock (maybe deeper) plus additional volume and, best of all, an edgier, crisper tone.
On the road, windows up. Don't really notice until you bury the foot and hit 6000. Windows down, you can hear it. Lovely, but not OTT.
Now for the G flash!
Thanks Hymee
It is posts like that that really make all the effort feel worthwhile!
It sounds like it hit the spot for you. Oops - a bit premature there - you need a G flash first!
And an announcement just to hand... Hymee has received his first batch of HymeeEnhanced decals. I will be sending one to owners of vehicles that are bona-fide "Hymee Enhanced". Then I'll have to order some more
![Frown](https://www.rx8club.com/images/smilies/frown.gif)
Look out for a post tonight on the Multimedia forum.
Cheers,
Hymee.
#10
Banned
Join Date: Mar 2003
Location: Gold Coast Australia
Posts: 3,535
Likes: 0
Received 2 Likes
on
2 Posts
![Talking](https://www.rx8club.com/images/icons/icon10.gif)
Originally posted by Gomez
O.K, I've seen and heard enough....Hymee, P.M me with a price on a Les special in mild steel with L@L's tips....
Gomez.
O.K, I've seen and heard enough....Hymee, P.M me with a price on a Les special in mild steel with L@L's tips....
![Smilie](https://www.rx8club.com/images/smilies/smile.gif)
Gomez.
Wise choice the tapered tips have a lot less carbon build up on them , than the conventional straight type tips(carbon build up seems to stop before the tapering starts ) and i believe that they standout and look better for it .
Glad to see that u have finally succumbed to the tapered tips , hopefully seeing and hearing mine had a bit of an influence on your decision .
cheers
michael
#12
rev it up
I like the look of the original mazda tip. Can that be replicated in your exhaust.
The special looks fairly big, will it fit into the space provided. You would not want to be too close to the plastics as it may melt.
skc
The special looks fairly big, will it fit into the space provided. You would not want to be too close to the plastics as it may melt.
skc
#13
Registered User
Join Date: Aug 2003
Location: between Sydney and Brisbane
Posts: 221
Likes: 0
Received 0 Likes
on
0 Posts
the tips look massive when you first open the carton Hymee packs them in, but seem to shrink into proportion once fitted to the car.
Timbo, not before time that you are finally H-enhanced, Wakefield seems a long time ago now. I have to agree entirely with your observation regarding factory-fit exhaust clamp. I needed the help of about 2' of pipe leverage on my socket set to loosen them, and ended up shearing one.
regards, jack
Timbo, not before time that you are finally H-enhanced, Wakefield seems a long time ago now. I have to agree entirely with your observation regarding factory-fit exhaust clamp. I needed the help of about 2' of pipe leverage on my socket set to loosen them, and ended up shearing one.
regards, jack
#15
Race Steward
iTrader: (1)
Originally posted by skc
I like the look of the original mazda tip. Can that be replicated in your exhaust.
The special looks fairly big, will it fit into the space provided. You would not want to be too close to the plastics as it may melt.
skc
I like the look of the original mazda tip. Can that be replicated in your exhaust.
The special looks fairly big, will it fit into the space provided. You would not want to be too close to the plastics as it may melt.
skc
Yes - the plastic does melt - if you have been running very hard on the dyno for an hour or so, and there is no air flow to cool things down. One reason Mazda make the Exhaust Finishers I suppose. And the only reason I decided to make some carbon fibre replacement exhaust surround panels.
But the exhaust is Track Proven, and I didn't get any reports of problems following Wakefield Park.
Cheers,
Hymee.
#16
Race Steward
iTrader: (1)
Originally posted by Hymee
And an announcement just to hand... Hymee has received his first batch of HymeeEnhanced decals. I will be sending one to owners of vehicles that are bona-fide "Hymee Enhanced". Then I'll have to order some more![Frown](https://www.rx8club.com/images/smilies/frown.gif)
Look out for a post tonight on the Multimedia forum.
And an announcement just to hand... Hymee has received his first batch of HymeeEnhanced decals. I will be sending one to owners of vehicles that are bona-fide "Hymee Enhanced". Then I'll have to order some more
![Frown](https://www.rx8club.com/images/smilies/frown.gif)
Look out for a post tonight on the Multimedia forum.
https://www.rx8club.com/showthread.p...threadid=28104
Cheers,
Hymee.
#17
Shifty Bastard.
Join Date: Feb 2004
Location: Melbourne, Australia.
Posts: 4,835
Likes: 0
Received 0 Likes
on
0 Posts
Originally posted by Lock & Load
Gomez
Wise choice the tapered tips have a lot less carbon build up on them , than the conventional straight type tips(carbon build up seems to stop before the tapering starts ) and i believe that they standout and look better for it .
Glad to see that u have finally succumbed to the tapered tips , hopefully seeing and hearing mine had a bit of an influence on your decision .
cheers
michael
Gomez
Wise choice the tapered tips have a lot less carbon build up on them , than the conventional straight type tips(carbon build up seems to stop before the tapering starts ) and i believe that they standout and look better for it .
Glad to see that u have finally succumbed to the tapered tips , hopefully seeing and hearing mine had a bit of an influence on your decision .
cheers
michael
#18
rev it up
Got my Hymee exhaust fitted this weekend.
Firstly, thanks Hymee for bringing a quality product at a bargain price. I took the car for a run to the Sunshine Coast over the weekend and got to put the system to test.
My first impressions were increased power and lovely sound beyond 3000 rpm. I also found that the gear transitions seem smoother as I power from one gear to another. This could be due to more power or me picking the engine note better resulting in better and faster gear changes.
Overall I am getting a better driving experience and more enjoyment out of my car.
skc
Firstly, thanks Hymee for bringing a quality product at a bargain price. I took the car for a run to the Sunshine Coast over the weekend and got to put the system to test.
My first impressions were increased power and lovely sound beyond 3000 rpm. I also found that the gear transitions seem smoother as I power from one gear to another. This could be due to more power or me picking the engine note better resulting in better and faster gear changes.
Overall I am getting a better driving experience and more enjoyment out of my car.
skc
#21
aka Smoothy
Thread Starter
Join Date: Jul 2003
Location: Brisbane Australia
Posts: 186
Likes: 0
Received 0 Likes
on
0 Posts
Pictures of my Hymee Exhaust
At long last I have got round to taking some picures of my new exhaust.
The basic view of the exhaust
A close up of the tip. Just like the stock except much bigger.
A view of the rear suspension. This is now visible as the replacement muffler canisters are much smaller.
It has been a few weeks since the install and I am still a very happy camper. I have now taken the car through a few tunnels and the sound is awesome!
The basic view of the exhaust
![](http://www.allsafe.com.au/images/newexhaust.jpg)
A close up of the tip. Just like the stock except much bigger.
![](http://www.allsafe.com.au/images/exhaustclose.jpg)
A view of the rear suspension. This is now visible as the replacement muffler canisters are much smaller.
![](http://www.allsafe.com.au/images/suspensionview.jpg)
It has been a few weeks since the install and I am still a very happy camper. I have now taken the car through a few tunnels and the sound is awesome!
#23
Race Steward
iTrader: (1)
Nice pics, Smoothy. A bit big at the res - 400+ k each, but still good.
Grab a copy of Paint Shop Pro or something, and resize them to about 640x480 before you host them. Brings the size right back to less than 100k. I always do a "Sharpen Image" on mine as well.
I thought the tip was scratched when I first saw it. Then I realised the Hy polish was just reflecting the aggregate in the driveway!
Cheers,
Hymee.
Grab a copy of Paint Shop Pro or something, and resize them to about 640x480 before you host them. Brings the size right back to less than 100k. I always do a "Sharpen Image" on mine as well.
I thought the tip was scratched when I first saw it. Then I realised the Hy polish was just reflecting the aggregate in the driveway!
Cheers,
Hymee.
#24
aka Smoothy
Thread Starter
Join Date: Jul 2003
Location: Brisbane Australia
Posts: 186
Likes: 0
Received 0 Likes
on
0 Posts
Grab a copy of Paint Shop Pro or something, and resize them to about 640x480 before you host them. Brings the size right back to less than 100k. I always do a "Sharpen Image" on mine as well.
PS Remember I am unusual here. - I am not an IT guy!
#25
Originally posted by rx8 - smooth!
Do you know a place I can grab it from?
PS Remember I am unusual here. - I am not an IT guy!
Do you know a place I can grab it from?
PS Remember I am unusual here. - I am not an IT guy!
![Wink](https://www.rx8club.com/images/smilies/wink.gif)