Silliest thing you have seen for the RX-8
#26
Registered
Join Date: May 2005
Location: Fredericskburg VA
Posts: 224
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by Revolver
You're all very weird. That's why I like you.
As for the petrol cap thing, I must be missing something that you people do while filling up. I take the cap off with my right hand, hold it while using the nozzle with my left hand and then put it back on again. Never gets near the paint work.
![Smilie](https://www.rx8club.com/images/smilies/smile.gif)
As for the petrol cap thing, I must be missing something that you people do while filling up. I take the cap off with my right hand, hold it while using the nozzle with my left hand and then put it back on again. Never gets near the paint work.
Could if we cut the little piece that holds it on, course why stand there holding the cap in one hand. I normally check my oil when filling up, or go inside to get drinks so having both hands free is nice. And this will allow both without the paint being touched......
#27
Shifty Bastard.
Join Date: Feb 2004
Location: Melbourne, Australia.
Posts: 4,835
Likes: 0
Received 0 Likes
on
0 Posts
Our caps come into the country sans lanyard.......
My method. Free, quick, easy. Just hook the cap onto the tang located on the inside of the door.
My method. Free, quick, easy. Just hook the cap onto the tang located on the inside of the door.
![](https://www.rx8club.com/attachments/australia-new-zealand-forum-37/78107-silliest-thing-you-have-seen-rx-8-fuel-cap-002.jpg)
#30
Shootin' from the hip
Join Date: Apr 2005
Location: Sydney, Australia
Posts: 7,584
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by REMillers
Could if we cut the little piece that holds it on, course why stand there holding the cap in one hand. I normally check my oil when filling up, or go inside to get drinks so having both hands free is nice. And this will allow both without the paint being touched......
And if I want to buy somehing I do it when I go in to pay for the fuel (haven't learnt to trust pay at the bowser card swipes either!).
#31
Shootin' from the hip
Join Date: Apr 2005
Location: Sydney, Australia
Posts: 7,584
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by Gomez
Our caps come into the country sans lanyard.......
My method. Free, quick, easy. Just hook the cap onto the tang located on the inside of the door.
![](https://www.rx8club.com/attachments/australia-new-zealand-forum-37/78107-silliest-thing-you-have-seen-rx-8-fuel-cap-002.jpg)
My method. Free, quick, easy. Just hook the cap onto the tang located on the inside of the door.
![](https://www.rx8club.com/attachments/australia-new-zealand-forum-37/78107-silliest-thing-you-have-seen-rx-8-fuel-cap-002.jpg)
But I'm still happy to hang onto it while filling up.
![Mdrmed](https://www.rx8club.com/images/smilies/mdrmed.gif)
#33
Respect my authoriti!
Join Date: Feb 2006
Location: Adelaide, Australia
Posts: 729
Likes: 0
Received 0 Likes
on
0 Posts
![Talking](https://www.rx8club.com/images/icons/icon10.gif)
Originally Posted by Revolver
Then cut the damn thing off! ![Smilie](https://www.rx8club.com/images/smilies/smile.gif)
![Smilie](https://www.rx8club.com/images/smilies/smile.gif)
Oo Oo my first modification...is this Mazda sanctioned!!!!
![Hahano](https://www.rx8club.com/images/smilies/hahano.gif)
And looking at the photo of Jeremy...I see he's sucking his guts in to look suave!!!
Revolver have you posted a photo of yourself on the forum hall of fame section??? I wanna see what you look like........
![Mdrmed](https://www.rx8club.com/images/smilies/mdrmed.gif)
#34
Shootin' from the hip
Join Date: Apr 2005
Location: Sydney, Australia
Posts: 7,584
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by Rotor Convert
Revolver have you posted a photo of yourself on the forum hall of fame section??? I wanna see what you look like........ ![Mdrmed](https://www.rx8club.com/images/smilies/mdrmed.gif)
![Mdrmed](https://www.rx8club.com/images/smilies/mdrmed.gif)
You'll have to come to the Nats and find out.
![Smilie](https://www.rx8club.com/images/smilies/smile.gif)
#35
Registered User
Wadda ya mean... You were published in the magazine as part of the nats group photo...
The only one who dipped out was Waldo 'cause Tim Tam was playing with his hat..
![Nono](https://www.rx8club.com/images/smilies/nono.gif)
#36
Hmmmmmm.........
Thread Starter
Join Date: Mar 2005
Location: Melbourne, Australia
Posts: 3,564
Likes: 0
Received 6 Likes
on
4 Posts
Originally Posted by Gomez
Our caps come into the country sans lanyard.......
My method. Free, quick, easy. Just hook the cap onto the tang located on the inside of the door.
![](https://www.rx8club.com/attachments/australia-new-zealand-forum-37/78107-silliest-thing-you-have-seen-rx-8-fuel-cap-002.jpg)
My method. Free, quick, easy. Just hook the cap onto the tang located on the inside of the door.
![](https://www.rx8club.com/attachments/australia-new-zealand-forum-37/78107-silliest-thing-you-have-seen-rx-8-fuel-cap-002.jpg)
#37
Hmmmmmm.........
Thread Starter
Join Date: Mar 2005
Location: Melbourne, Australia
Posts: 3,564
Likes: 0
Received 6 Likes
on
4 Posts
Originally Posted by Revolver
You're all very weird. That's why I like you.
As for the petrol cap thing, I must be missing something that you people do while filling up. I take the cap off with my right hand, hold it while using the nozzle with my left hand and then put it back on again. Never gets near the paint work.
![Smilie](https://www.rx8club.com/images/smilies/smile.gif)
As for the petrol cap thing, I must be missing something that you people do while filling up. I take the cap off with my right hand, hold it while using the nozzle with my left hand and then put it back on again. Never gets near the paint work.
This is what went through my mind when I saw the pics with the cap sitting in the holder:
Step one. Unscrew the cap
Step two. Whoops I dropped it and it fell on the ground
No problem just pick it up and dust it off.
Insert silly fuel cap holder thingy
Step One. Unscrew the cap
Step two. Whoops I dropped it and it fell on the ground
Oh #$%^&* that nice handy cord that attaches it to the car so I cant loose it has swung it into the car and damaged the paint work....Maybe I should just hold it in my hand !
#38
Shootin' from the hip
Join Date: Apr 2005
Location: Sydney, Australia
Posts: 7,584
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by xxup
Wadda ya mean... You were published in the magazine as part of the nats group photo...
The only one who dipped out was Waldo 'cause Tim Tam was playing with his hat..
![Nono](https://www.rx8club.com/images/smilies/nono.gif)
Too bad there's no electronic copies huh?
![Mdrmed](https://www.rx8club.com/images/smilies/mdrmed.gif)
#39
Registered
Join Date: May 2005
Location: Fredericskburg VA
Posts: 224
Likes: 0
Received 0 Likes
on
0 Posts
Just wondering if all your gas caps come without the attachment plastic and if all your gas caps have the groves in the sides so that you can slide it on the door.
Cause so far all the US ones are solid all the way around like the orginal picture, and thus simply sliding it on the door isn't possible less you buy a aftermarket one or cut the notchs.
Cause so far all the US ones are solid all the way around like the orginal picture, and thus simply sliding it on the door isn't possible less you buy a aftermarket one or cut the notchs.
#40
Registered User
Originally Posted by Revolver
Too bad there's no electronic copies huh? ![Mdrmed](https://www.rx8club.com/images/smilies/mdrmed.gif)
![Mdrmed](https://www.rx8club.com/images/smilies/mdrmed.gif)
![Mdrmed](https://www.rx8club.com/images/smilies/mdrmed.gif)
#41
Shootin' from the hip
Join Date: Apr 2005
Location: Sydney, Australia
Posts: 7,584
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by xxup
You think??? Gee I remember a number of people taking photos up on that gantry... What's it worth to you??? ![Mdrmed](https://www.rx8club.com/images/smilies/mdrmed.gif)
![Mdrmed](https://www.rx8club.com/images/smilies/mdrmed.gif)
![Mdrmed](https://www.rx8club.com/images/smilies/mdrmed.gif)
#42
Shootin' from the hip
Join Date: Apr 2005
Location: Sydney, Australia
Posts: 7,584
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by REMillers
Just wondering if all your gas caps come without the attachment plastic and if all your gas caps have the groves in the sides so that you can slide it on the door.
Cause so far all the US ones are solid all the way around like the orginal picture, and thus simply sliding it on the door isn't possible less you buy a aftermarket one or cut the notchs.
Cause so far all the US ones are solid all the way around like the orginal picture, and thus simply sliding it on the door isn't possible less you buy a aftermarket one or cut the notchs.
![Smilie](https://www.rx8club.com/images/smilies/smile.gif)
For those unable to hook it on the flap door just hang onto it as I do or hey, here's an idea, lay it on the bowser top while you're filling up, checking your oil, buying your drinks, checking the latest stock prices, adjusting your bra strap, etc, etc...
![Mdrmed](https://www.rx8club.com/images/smilies/mdrmed.gif)
Hmm, wonder if my trunk monkey can source some skyhooks to solve this mighty dilemma. Group buy anyone?
#43
Respect my authoriti!
Join Date: Feb 2006
Location: Adelaide, Australia
Posts: 729
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by xxup
You think??? Gee I remember a number of people taking photos up on that gantry... What's it worth to you??? ![Mdrmed](https://www.rx8club.com/images/smilies/mdrmed.gif)
![Mdrmed](https://www.rx8club.com/images/smilies/mdrmed.gif)
Go on post it....you know you want too...
![Rock](https://www.rx8club.com/images/smilies/rock.gif)
![Angel](https://www.rx8club.com/images/smilies/angel.gif)
![Kiss](https://www.rx8club.com/images/smilies/kiss.gif)
#44
Hmmmmmm.........
Thread Starter
Join Date: Mar 2005
Location: Melbourne, Australia
Posts: 3,564
Likes: 0
Received 6 Likes
on
4 Posts
Originally Posted by REMillers
Just wondering if all your gas caps come without the attachment plastic and if all your gas caps have the groves in the sides so that you can slide it on the door.
Cause so far all the US ones are solid all the way around like the orginal picture, and thus simply sliding it on the door isn't possible less you buy a aftermarket one or cut the notchs.
Cause so far all the US ones are solid all the way around like the orginal picture, and thus simply sliding it on the door isn't possible less you buy a aftermarket one or cut the notchs.
Mez, I would do it but I am out of the country, can you post a pic like the one you posted here, but from the side?
#45
Shifty Bastard.
Join Date: Feb 2004
Location: Melbourne, Australia.
Posts: 4,835
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by Rotor Convert
Go on post it....you know you want too...
Be a devil......post the bloody thing...please I wanna see....or even email it to me....pretty please
![Kiss](https://www.rx8club.com/images/smilies/kiss.gif)
![Rock](https://www.rx8club.com/images/smilies/rock.gif)
![Angel](https://www.rx8club.com/images/smilies/angel.gif)
![Kiss](https://www.rx8club.com/images/smilies/kiss.gif)
![Smilie](https://www.rx8club.com/images/smilies/smile.gif)
#46
Shifty Bastard.
Join Date: Feb 2004
Location: Melbourne, Australia.
Posts: 4,835
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by auzoom
Mez, I would do it but I am out of the country, can you post a pic like the one you posted here, but from the side?
![Eyecrazy](https://www.rx8club.com/images/smilies/Eyecrazy.gif)