sus engine failure report
05-11-2009, 10:35 PM
#26
Buzz Buzz Buzz
Join Date: Mar 2005
Location: Melbourne, Victoria
Posts: 1,931
Likes: 0
Received 0 Likes
on
0 Posts
You can do that, let us know how it goes!
Apologies for the slip, it's actually called Sea Foam.
http://www.seafoamsales.com/
05-12-2009, 12:27 AM
#29
well different dyno have different readings...
On another dyno it was 90.4 O.o another was 101 now its 72...... lol..
Anyways the compression ratios of 7 and 9 are they like decent to keep driving?
or is my engine gonna go kapow soon?
On another dyno it was 90.4 O.o another was 101 now its 72...... lol..
Anyways the compression ratios of 7 and 9 are they like decent to keep driving?
or is my engine gonna go kapow soon?
05-12-2009, 08:18 AM
#31
Shifty Bastard.
Join Date: Feb 2004
Location: Melbourne, Australia.
Posts: 4,835
Likes: 0
Received 0 Likes
on
0 Posts
Flooding can damage your RX-8.
When the car ultimately starts, the EGT can reach very high temperatures with all that fuel burning in the exhaust. Catalytic converters have been reported as glowing red hot after a flooding incident.....a much shorter cat life is the end result.
When the car ultimately starts, the EGT can reach very high temperatures with all that fuel burning in the exhaust. Catalytic converters have been reported as glowing red hot after a flooding incident.....a much shorter cat life is the end result.
05-12-2009, 05:19 PM
#32
05-12-2009, 06:29 PM
#33
Registered User
Join Date: Apr 2005
Location: Canberra
Posts: 745
Likes: 0
Received 0 Likes
on
0 Posts
Flooding can damage your RX-8.
When the car ultimately starts, the EGT can reach very high temperatures with all that fuel burning in the exhaust. Catalytic converters have been reported as glowing red hot after a flooding incident.....a much shorter cat life is the end result.
When the car ultimately starts, the EGT can reach very high temperatures with all that fuel burning in the exhaust. Catalytic converters have been reported as glowing red hot after a flooding incident.....a much shorter cat life is the end result.
05-12-2009, 10:44 PM
#34
Ok, follow up.
Everything is repaired, cost was reasonable, nothing over the top.
All in all abit surprised but a still content customer with simon.
Promaz does do great work
Everything is repaired, cost was reasonable, nothing over the top.
All in all abit surprised but a still content customer with simon.
Promaz does do great work
05-13-2009, 06:11 AM
#35
Hmmmmmm.........
Join Date: Mar 2005
Location: Melbourne, Australia
Posts: 3,564
Likes: 0
Received 6 Likes
on
4 Posts
Jason, never feel bad about questioning something that makes no sense. One thing about Simon is he is very expensive, but reliable. Also be aware that he will ALWAYS state up front a ridiculous price, but when it comes to actually paying the bill it tends to be a little more reasonable.
For those that aren't aware, Simon/ProMaz were one of the first to bring out a turbo kit for the 8 worldwide let alone in Australia. He is the one that originally produced the P&P harness for the LT10s and was at one stage shipping it worldwide (May still be). People may not like the LT10S/Interceptor but it gets the job done, is reliable and achieves good results. Simons turbo cars are putting out 200rwkw reliably on 11psi.
As for the decarb, he uses a product similar to seafoam. The "Rebuild" was, from what I can make out, a continuation of the fact he believed you were running low comp due to being carbed up I(the spring comment from what I can tell is him explaining the springs under the apex seals not being able to do anything becaus ethe seal are carboned to the rotors). I can only assume that he was thinking along the lines of "We need to do a decarb and if that doesn't work, you may need a rebuild to fix the carbon build up or low comp. To me a reasonable conclusion.
In the end, from what I can tell the reason it flooded was a combination of a weak battery and low compression.
Hope that helps.
Cheers
Andrew
For those that aren't aware, Simon/ProMaz were one of the first to bring out a turbo kit for the 8 worldwide let alone in Australia. He is the one that originally produced the P&P harness for the LT10s and was at one stage shipping it worldwide (May still be). People may not like the LT10S/Interceptor but it gets the job done, is reliable and achieves good results. Simons turbo cars are putting out 200rwkw reliably on 11psi.
As for the decarb, he uses a product similar to seafoam. The "Rebuild" was, from what I can make out, a continuation of the fact he believed you were running low comp due to being carbed up I(the spring comment from what I can tell is him explaining the springs under the apex seals not being able to do anything becaus ethe seal are carboned to the rotors). I can only assume that he was thinking along the lines of "We need to do a decarb and if that doesn't work, you may need a rebuild to fix the carbon build up or low comp. To me a reasonable conclusion.
In the end, from what I can tell the reason it flooded was a combination of a weak battery and low compression.
Hope that helps.
Cheers
Andrew
05-13-2009, 07:10 AM
#36
yea exactly.
Whole point of the post was questioning a few things.
Look i doult simon is lying to me or something, it was just that i got confused on the reason my engine just apparently *went*
The context he put out for me prob made it abit worse. But thats prob better then sugarcoating then finding out it is worse.
As a conclusion, like Andrew said, he is good, reliable. But go in and expect a price tag attached. Maybe in the end it wont be too much, but know that he does good work for his price.
Whole point of the post was questioning a few things.
Look i doult simon is lying to me or something, it was just that i got confused on the reason my engine just apparently *went*
The context he put out for me prob made it abit worse. But thats prob better then sugarcoating then finding out it is worse.
As a conclusion, like Andrew said, he is good, reliable. But go in and expect a price tag attached. Maybe in the end it wont be too much, but know that he does good work for his price.
05-13-2009, 08:28 AM
#37
Registered User
Join Date: Aug 2007
Location: Melbourne
Posts: 174
Likes: 0
Received 0 Likes
on
0 Posts
In my limited dealings with Simon I have found him to be knowledeable and honest. He may be expensive, but he is still cheaper than a dealer, and he will offer better service and will more often than not do a better job. He has a strong track record with rotaries, not just RX8s.
I did hear some horror stories about him, years ago, but that was from a rival rotary builder/workshop/drag racer who has since left his own reputation in tatters and my own personal experience with Simon/Promaz suggests that those stories were bullshit.
I did hear some horror stories about him, years ago, but that was from a rival rotary builder/workshop/drag racer who has since left his own reputation in tatters and my own personal experience with Simon/Promaz suggests that those stories were bullshit.
I think we've got mistaken meanings here. Too funny!
05-18-2009, 08:39 PM
#48
Buzz Buzz Buzz
Join Date: Mar 2005
Location: Melbourne, Victoria
Posts: 1,931
Likes: 0
Received 0 Likes
on
0 Posts
05-19-2009, 05:03 PM
#50
Shootin' from the hip
Join Date: Apr 2005
Location: Sydney, Australia
Posts: 7,584
Likes: 0
Received 0 Likes
on
0 Posts
