Turbo RX8 Sydney - MAZFIX Brisbane
08-11-2006, 10:23 PM
#1
bezoomy
Thread Starter
Join Date: Mar 2005
Location: Sydney
Posts: 47
Likes: 0
Received 0 Likes
on
0 Posts
Turbo RX8 Sydney - MAZFIX Brisbane
My car has been away for over a week (at a retreat for RX8's in QLD)still with a week or more to go.
It will be coming back to me with a minimum of 200 kw at the rear wheels.
I have driven a version of what I am getting (but not as good ) and thought to myself,..."thank God, I'm wearing 2 pairs of undies!" When I get my car back I will have to wear 3-4 pairs.... because what I drove was bloody fantastic.... I mean it !!! I would compare it to the feeling I got when I was a passenger in a RX7 SP model as it was spinning from 1st into 2nd and 3rd.......
My waiting and hunting is finally over....... MAZFIX are the go !!!!!!!!!
Archie, brock and the gang are gentlemen.
I read somewhere that Mazfix charge like a wounded bull..... Not,..... so I say !!
You pay for what you get!!!
And this is what I'm getting....................
Here we go: Mazfix Turbo stage one , , new heavy duty clutch, new radiator, huge intercooler,(cause I have a Mazda speed nose and have the room) 2 x huge oil coolers, blow off value plumbed back into itself (so no blowoff noise), light weight flywheel and counter weight, a mazfix boost switch located in the centre console for 5 or 10pounds boost, a custom made free flowing catback,....hiflow airbox, turbo timer and wait for it ,............Mazfix are going to do the injectors on the thing.... going for a stage 2 ......as well.
Do I sound excited?
It will be coming back to me with a minimum of 200 kw at the rear wheels.
I have driven a version of what I am getting (but not as good ) and thought to myself,..."thank God, I'm wearing 2 pairs of undies!" When I get my car back I will have to wear 3-4 pairs.... because what I drove was bloody fantastic.... I mean it !!! I would compare it to the feeling I got when I was a passenger in a RX7 SP model as it was spinning from 1st into 2nd and 3rd.......
My waiting and hunting is finally over....... MAZFIX are the go !!!!!!!!!
Archie, brock and the gang are gentlemen.
I read somewhere that Mazfix charge like a wounded bull..... Not,..... so I say !!
You pay for what you get!!!
And this is what I'm getting....................
Here we go: Mazfix Turbo stage one , , new heavy duty clutch, new radiator, huge intercooler,(cause I have a Mazda speed nose and have the room) 2 x huge oil coolers, blow off value plumbed back into itself (so no blowoff noise), light weight flywheel and counter weight, a mazfix boost switch located in the centre console for 5 or 10pounds boost, a custom made free flowing catback,....hiflow airbox, turbo timer and wait for it ,............Mazfix are going to do the injectors on the thing.... going for a stage 2 ......as well.
Do I sound excited?
Last edited by dbrx8; 08-11-2006 at 10:34 PM.
08-12-2006, 10:54 PM
#8
Banned
Join Date: Jun 2006
Posts: 371
Likes: 0
Received 0 Likes
on
0 Posts
Adrian , ring Archie i am certain that he would be more than happy to get his TURBO RX8 OUT TO GOULBURN 
EXPOSURE RESULTS IN SALES 
, i wou;d be more than happy to drive it down for him 
Michael
EXPOSURE RESULTS IN SALES , i wou;d be more than happy to drive it down for him Michael
08-13-2006, 05:46 AM
#9
bezoomy
Thread Starter
Join Date: Mar 2005
Location: Sydney
Posts: 47
Likes: 0
Received 0 Likes
on
0 Posts
yep im going to the NATs if its on!!
When speaking with Archie he mentioned how he was dissapointed last year for not attending the nats as he was in the states tuning drag cars... or something like that..
When I next speak with him I will push him.....
By the way.... Archie reckons my 8 will be the fastest in the country... when he's done with it....
I may be flying to Brisbane on friday to collect it......I hope!
I haven't been this excited since....I don't know when..
db
When I next speak with him I will push him.....
By the way.... Archie reckons my 8 will be the fastest in the country... when he's done with it....
I may be flying to Brisbane on friday to collect it......I hope!
I haven't been this excited since....I don't know when..
db
08-13-2006, 07:57 PM
#12
Registered User
Join Date: Apr 2005
Location: Sydney Australia
Posts: 76
Likes: 0
Received 0 Likes
on
0 Posts
Sounds great!
Would love to know what kind of results you got. Can you give us some ballpark pricing for the upgrades that you have installed?
Edit... Found their website, looks like they have their stuff together http://www.mazfix.com.au/perfproduct..._Turbo_Upgrade
Would love to know what kind of results you got. Can you give us some ballpark pricing for the upgrades that you have installed?
Edit... Found their website, looks like they have their stuff together http://www.mazfix.com.au/perfproduct..._Turbo_Upgrade
Last edited by StratoMike; 08-13-2006 at 10:30 PM.
08-14-2006, 02:53 AM
#14
Registered User
Originally Posted by generis
I'll be very interested to see the results. Glad to see you are planning on attending the nats. Look forward to sharing another case of Crownies!
It was a great night...
Last edited by xxup; 08-14-2006 at 02:56 AM.
08-14-2006, 06:39 PM
#16
Shootin' from the hip
Join Date: Apr 2005
Location: Sydney, Australia
Posts: 7,584
Likes: 0
Received 0 Likes
on
0 Posts
One question for you - who are you going to get to tune and service the thing once you get it back to Sydney?
You see, I tend to agree from what I've read and heard that Archie's kit is the way to go if you want to turbo charge the car but the non-mechanic in me wonders if the ongoing tuning and maintenance would be a problem.
You see, I tend to agree from what I've read and heard that Archie's kit is the way to go if you want to turbo charge the car but the non-mechanic in me wonders if the ongoing tuning and maintenance would be a problem.
08-14-2006, 06:46 PM
#17
Banned
Join Date: Jun 2006
Posts: 371
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by Wildcard
Sounds very exciting! Look forward to hearing about it.
Dan
I thought that you were inducted into the supercharger school , hmmm why would you consider a Turbo .
Michael
08-14-2006, 10:04 PM
#18
Shifty Bastard.
Join Date: Feb 2004
Location: Melbourne, Australia.
Posts: 4,835
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by Grizzly8
Dan
I thought that you were inducted into the supercharger school , hmmm why would you consider a Turbo .
Michael
I thought that you were inducted into the supercharger school , hmmm why would you consider a Turbo .
Michael
08-14-2006, 10:40 PM
#19
Banned
Join Date: Jun 2006
Posts: 371
Likes: 0
Received 0 Likes
on
0 Posts
Not triyng to **** stir just asking a valid question , considering Wilcard was directly involved as test pilot for the supercharger .
I am sure that others who read this post also are curious for an answer , i just happened to be the first one to ask .
Michael
I am sure that others who read this post also are curious for an answer , i just happened to be the first one to ask .
Michael
Last edited by Grizzly8; 08-14-2006 at 10:46 PM.
08-15-2006, 12:53 AM
#20
Shootin' from the hip
Join Date: Apr 2005
Location: Sydney, Australia
Posts: 7,584
Likes: 0
Received 0 Likes
on
0 Posts
Well, Dan can speak for himself I guess but I've noticed him registering interest in other turbo threads in the past. This needn't be a religious subject. Just because you've bought or tested one kind of FI solution there's no reason not to be interested in others.
08-15-2006, 07:44 AM
#21
bezoomy
Thread Starter
Join Date: Mar 2005
Location: Sydney
Posts: 47
Likes: 0
Received 0 Likes
on
0 Posts
Who's going to service my car in Sydney????
I actually discussed this with Archie..
I think he is going to find someone for me or look into hooking up with someone decent. He is also arranging for the engineers report and so forth as they cannot do it in QLD.
There is a guy in Willoughby "United" Service station who is a rotary freak !!!! He owns the rx7 SP model I spoke of in a earlier email..
Images of my car so far: Archie emailed me today
how do you upload??
I think he is going to find someone for me or look into hooking up with someone decent. He is also arranging for the engineers report and so forth as they cannot do it in QLD.
There is a guy in Willoughby "United" Service station who is a rotary freak !!!! He owns the rx7 SP model I spoke of in a earlier email..
Images of my car so far: Archie emailed me today
how do you upload??
08-15-2006, 08:28 AM
#22
bezoomy
Thread Starter
Join Date: Mar 2005
Location: Sydney
Posts: 47
Likes: 0
Received 0 Likes
on
0 Posts
The Pics
Hope you can see the Pics...They are a bit dark..
By the way, I only got one huge oil cooler....not 2 as I previously mentioned. I added one (which is the huge one)
Plus Archie rang today and advised that with the stage one kit turbo he puts bigger injectors in ...But to get more fuel into my 8 and take it that step further he will be adding a extra injector....it will take some time to find the correct position and correctly tune it.......
Still no pipe yet,... maybe I will get to pick it up this week end....
Watch out here I come !!!!!!!!!!!!!!!!!!
By the way, I only got one huge oil cooler....not 2 as I previously mentioned. I added one (which is the huge one)
Plus Archie rang today and advised that with the stage one kit turbo he puts bigger injectors in ...But to get more fuel into my 8 and take it that step further he will be adding a extra injector....it will take some time to find the correct position and correctly tune it.......
Still no pipe yet,... maybe I will get to pick it up this week end....
Watch out here I come !!!!!!!!!!!!!!!!!!
Last edited by dbrx8; 08-30-2006 at 11:06 PM.
08-15-2006, 10:50 AM
#23
NT Rotorhead
Join Date: Aug 2003
Location: Katherine, NT
Posts: 746
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by Grizzly8
Dan
I thought that you were inducted into the supercharger school , hmmm why would you consider a Turbo .
Michael
I thought that you were inducted into the supercharger school , hmmm why would you consider a Turbo .
Michael
08-15-2006, 06:31 PM
#24
Banned
Join Date: Jun 2006
Posts: 371
Likes: 0
Received 0 Likes
on
0 Posts
Replacing the last 2 injectors that give around 450cc with the 4speed Automatic ones which give 640cc seems to be more than adequate for fuel improvement .
Scott and others have done this ,
https://www.rx8club.com.au/forum/viewtopic.php?t=1367
Michael
Scott and others have done this ,
https://www.rx8club.com.au/forum/viewtopic.php?t=1367
Michael
08-15-2006, 06:31 PM
#25
Shootin' from the hip
Join Date: Apr 2005
Location: Sydney, Australia
Posts: 7,584
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by dbrx8
I actually discussed this with Archie..
I think he is going to find someone for me or look into hooking up with someone decent. He is also arranging for the engineers report and so forth as they cannot do it in QLD.
There is a guy in Willoughby "United" Service station who is a rotary freak !!!! He owns the rx7 SP model I spoke of in a earlier email..
I think he is going to find someone for me or look into hooking up with someone decent. He is also arranging for the engineers report and so forth as they cannot do it in QLD.
There is a guy in Willoughby "United" Service station who is a rotary freak !!!! He owns the rx7 SP model I spoke of in a earlier email..
Hope you're up and running for the next Sydney meet. Would love a first-hand look at Archie's handiwork.
BTW, did you attend last year's Nats? The car and your nick seems familiar.