Kafka

Hi folks,

Initial schedule rundown, pending confirmation with Al:
Time Event Responsible
0700 Helpers arrival Helpers
0730 Briefing of posts and rundown Al, Joshua
0800 Set up 1 (eg Parkings, Ticket, silent auction, mazdaspeed booth, ) Al, Helpers
0845 Break
0900 Set up 2 (BBQ, DJ etc) Helpers
0930 Ticket booth ready Ticket helpers
1000 Alignment Draw Draw helpers
1100 Road force Draw Draw helpers
1130 Lunch 1
1200 Alignment Draw Draw helpers
1300 Road force Draw Draw helpers
1400 Alignment Draw Draw helpers
1430 Lunch 2
1500 Road force Draw Draw helpers
1515 Silent auction ends Silent auction helpers
1530 Silent auction winning announcement Al
1600 Alignment Draw Draw helpers
1630 Clean up Helpers
1730 GTFO All

Notes:
The Mazdaspeed sales table maybe either in vendor section or inside depending on space.

Leave space for Alignment machine door

The following cars may need designated spots due to its rare status - Probably along side the Star mazda trailer and Dyson racing trailers.

1967 Mazda Cosmo the only one in Canada
1972 Mazda RX2 RE
1974 Mazda RX4 undergoing restoration
1990 Mazda Cosmo 3 rotor twin turbo (was at MOTM)
2010 Mazdaspeed 3
2010 Mazda RX8 R3


The 1967 and 1990 one maybe in the showroom along with the 2 race cars...pending Al decision.

Thank you.

revised floorplan:

01Racing

Just an example of the savings tomorrow Mazdaspeed Dual Muffler exhaust, Retail $ $1264.58 Cost $821.16 Tomorrow only $789.00! Only 5 in Toronto available!

REV-illusions

iTrader: (3)

Look at what just rolled into town

rotarygreg

holy **** man! thats so badass! im so jealous chris. so are you trading your 8 in for one or what?

REV-illusions

iTrader: (3)

haha... damn skippy. Now I just need to come up with the rest of the money.. like... roughly $1,489,999.00. That's not including the motor or any spare parts for anything... lol... nor the stearing wheel (another 100k)... sigh.

Anyhoo... Dyson brought some posters as well.. they look very sick and they only made a limited run of about 500. I think there's about 40 left. I've set a number aside for the folks who are helping out to ensure that you have one. Once again, this is going to be awesome!

rotarygreg

rx8thunder

Hey Chris, that car really suits you!

Neo

I'm actually stunned that Chris can fit... or can't you? Could you put the door down while you were in there???

Are there going to be any left for some of us hardcore guys who have owned their vehicles for longer than 10yrs???

I just got back from a little gathering from one of the RX-7 guys I've known since we've started the forum.
You can count on a 2 2nd Gen RX7, another FD, and 2 RX-8's for sure for tomorrow.

I'm hoping to be there for roll in call! (If not a little earlier to help out!)

Ka Kui

iTrader: (7)

Wow, that's so nice........ can't wait for tomorrow

01Racing

0955 update (Not even started yet lol)

RXeckless

iTrader: (5)

Al, let me be the first to congratulate you on great event hopefully not the last.
Hope the numbers were to your liking , great people, great cars.

WhiteComet

I was at the event this morning and was truly amazed! Great turnout from the clubs. Best looking dealership lot ever! Not to mention, I've never seen so many rotories together before.

Hats off to Al, his team and all the volunteers for putting together the event.

Neo

Great turn out!!

Big thanks to Al and everyone who helped make this day possible.
Heard Sick Kids did great with the contributions.

Can't thank enough to the Dyson team for letting us poke and prod the ALMS car. The positioning fit like a glove!! I would've loved to have felt what it's like with the door on and the steering wheel in place.

Caught up with alot of people I haven't seen in a very long time! Good to see the community is still going strong.

Can't wait for the next major meet!!!

phobi

Kudos to you Al! This really looked like a great success, to see everything play out the way it did was just magical. To see some many enthusiasts roaming about, talking & sharing was a real treat, and i'm appreciative to see it!

i foresee this being an annual shin-dig, and with each passing year i can see it getting larger & larger, 7SN is here to stay.

Ka Kui

iTrader: (7)

Great event, really enjoy it, thanks for all the help and organization................ ^^

01Racing

I really appreciate all the praise from everyone, but it is you that deserve the praise. There are way too many people from the club to thank individually because I would surely leave someone out. The true thanks go out to all of you, the loyal enthusiasts who came out and supported the event, and have supported Scarboro Mazda! Thank you all so much again!

I was truly amazed by the sheer number of RX8's that came out you guys really came through for the event.

Again I cant tell you all how much all your support means to me personally and Scarboro Mazda, you really showed your loyalty to us and the Mazda brand!

01Racing

Nobody have any pics to post? lol This is an article from Race Canada.ca
http://www.racecanada.ca/Articles/Ne.../09082403.html

Rotary Mike

Great Article Al! Nice pics

Footman

iTrader: (2)

Al, I'm coming tomorrow after work to drop off the CD with all the pics. I've gone through them and deleted the shitty ones, so it's all I have that's good.. approx 134 photos.

foxy8

---
teeheeee! thanks for the link Al!

i love how they captioned my pic with david. haha.

"AIM Autsport's David Ostella posing with fans"

WIN!

01Racing

Thank you for all your help that day!

Rotary Mike

The Cars of MAZDASPEED North 2009




Celebrating Automotive Passion

Michael Schlee


Over 120 Mazda’s showed up. Race cars, custom cars, show cars and 40+ years of rotary powered vehicles were on hand. The event was Mazdaspeed North and it took place this past Sunday at Scarboro Mazda. The event was a huge success and rose over $2000 for The Hospital for Sick Children.

Mazda Cosmo 110S



Those who made it out got a glimpse of some very rare and special vehicles from Mazda’s past including a 1967 Mazda Cosmo 110S.



There were no fewer then 7 Mazda powered race cars that anyone could get up close and personal too. This included the Dyson Racing Team from the American Le Mans Series and the AIM Motorsports team from the Star Mazda Series; both of which are racing at Mosport next weekend. People were even able to sit in these cars to have thier photo taken.



Enthusiasts came out in droves for the event. There were over 70 rotary powered vehicles on hand and more then a dozen Roadsters. This was the first year for the event that should only become bigger in the years to come. So, enough talk about the vehicles. Browse the gallery below and check out the vehicles.



*If you would like Michael Schlee to cover your event please email him at michael.schlee@trader.ca


#gallery-1 { margin: auto; } #gallery-1 .gallery-item { float: left; margin-top: 10px; text-align: center; width: 33%; } #gallery-1 img { border: 2px solid #cfcfcf; } #gallery-1 .gallery-caption { margin-left: 0; }

Mazda Cosmo 110S

Mazda Cosmo 110S

Mazda Cosmo 110S

V8 RX-7

V8 RX-7

3 Rotor RX-7

3 Rotor RX-7

Mazda RX-2

2010 Mazdaspeed 3

MAZDASPEED North

MAZDASPEED North

MAZDASPEED North

MAZDASPEED North

MAZDASPEED North

MAZDASPEED North

MAZDASPEED North

MAZDASPEED North

MAZDASPEED North

MAZDASPEED North

MAZDASPEED North

MAZDASPEED North

MAZDASPEED North

MAZDASPEED North
MAZDASPEED North

AIM Autosports

AIM Autosports

AIM Autosports

Rotary Mike

Dyson Racing

Dyson Racing

Dyson Racing


MAZDASPEED North

MAZDASPEED North

MAZDASPEED North


MAZDASPEED North

MAZDASPEED North

MAZDASPEED North


MAZDASPEED North

MAZDASPEED North

MAZDASPEED North


MAZDASPEED North

MAZDASPEED North

Rotary Mike

That is all for now

2hit6

WOW...looked like it was an awesome and successful event! Congrads!!!! The event will only get bigger from now onwards.....lolz
________
5 series