Anyone intrested in doing Footwell lights?
09-17-2008, 11:51 PM
#26
I can help with any interior bulb selection/install information when the time comes to do it.
I am actually taking some measurements this weekend when I return to Toronto on the clear corner unit. I will be measuring the width and maximum depth allowable for that unit. The reason being there are several available SMT-LED 194's available that can fit in the clear corner from VLED.com. Some are larger/wider but contain more LED's for more light.
There is also a 6-SMT-LED Flange bulb which would work perfectly well for the corner units with the exception that the bulb socket when in its "locked" position has to have the socket aligned vertically. The flange LED only has LEDs on a flat surface exactly on the same plane as the plug socket.
I am actually taking some measurements this weekend when I return to Toronto on the clear corner unit. I will be measuring the width and maximum depth allowable for that unit. The reason being there are several available SMT-LED 194's available that can fit in the clear corner from VLED.com. Some are larger/wider but contain more LED's for more light.
There is also a 6-SMT-LED Flange bulb which would work perfectly well for the corner units with the exception that the bulb socket when in its "locked" position has to have the socket aligned vertically. The flange LED only has LEDs on a flat surface exactly on the same plane as the plug socket.
09-18-2008, 04:33 AM
#27
Registered
Join Date: Mar 2007
Location: Scarborough/Ottawa, Ontario
Posts: 150
Likes: 0
Received 0 Likes
on
0 Posts
A Standard 194 size 4 LED or 6 LED in the corners is more than sufficient light. I've got a 6 LED bulb in each corner and they are really bright. Anything more and the focus gets drawn to the corners rather than the headlights.
Thread
Thread Starter
Forum
Replies
Last Post
jasonrxeight
RX-8's For Sale/Wanted
2
09-30-2015 01:53 PM
Evan Gray
Series I Trouble Shooting
0
09-26-2015 12:30 PM
