Notices
Canada Forum For our friends up North, eh!

Club Track Day: FABI, July 16th, 2010

Thread Tools
 
Search this Thread
 
Rate Thread
 
Old 07-14-2010 | 01:05 AM
  #126  
Maffu313's Avatar
Registered
iTrader: (2)
 
Joined: Mar 2009
Posts: 760
Likes: 0
From: Toronto, Ontario
Originally Posted by Thumper3322
*** rain!!! I have been waiting too long for this and to run my R1s yet again. Prob only one I'm doing this year....so pissed.

I'm past Kennedy commons and with traffic you guys are gonna be pushing it.

Least it's at 5:30 now instead of 5. I'm leaving around 2 from Ajax...and trust me there is traffic at 2 on Fridays, with rain it will be worse.
I agree, leaving at 3 might be pushing our luck? it takes about 2 hrs 30 min to get there, but with traffic and rain it might take longer. Also considering how it would be better to get there a little early.

Let's hope that either the track dries up early enough so that we can still use the R1s or that it just doesn't rain at shannonville *fingers crossed*
Old 07-14-2010 | 06:22 AM
  #127  
RXeckless's Avatar
Thread Starter
Rotorless
iTrader: (5)
 
Joined: Jul 2008
Posts: 1,135
Likes: 3
From: Delhi, ON Canada
Originally Posted by Footman
Starting the list:

Location: Kennedy Common's
Time: 3:00pm (giving us 3 hours of buffer time)


1. 2hit6
2. rx8-druggist
3. maffu313
4. rotary/boxer mike
5. footman


Can we make a stop at UT Scarborough campus? Need to pick up Margaret. It's along the way, just exit Morningside.

No, it does not giving you 3 hours of buffer time! See Post #1
Be at the track by 5:00 p.m. our track time starts at 5:30!
I'm leaving my work at 2:00-2:15 so far with scottish and thriller @ Vic Park & Denison.
Everyone meet by the main paddock area near the administration building not the Fabi paddock.
Old 07-14-2010 | 06:48 AM
  #128  
Footman's Avatar
Dodging those Corollas
iTrader: (2)
 
Joined: Oct 2006
Posts: 4,637
Likes: 7
From: Stouffville, Ontario, Canada
So, Kennedy Commons at 2:30pm then?
Old 07-14-2010 | 07:59 AM
  #129  
c_ls's Avatar
Registered
iTrader: (3)
 
Joined: Mar 2010
Posts: 343
Likes: 1
Originally Posted by Footman
Starting the list:

Location: Kennedy Common's
Time: 3:00pm (giving us 3 hours of buffer time)


1. 2hit6
2. rx8-druggist
3. maffu313
4. rotary/boxer mike
5. footman


Can we make a stop at UT Scarborough campus? Need to pick up Margaret. It's along the way, just exit Morningside.
I got deleted from the list

Location: Kennedy Common's
Time: 2:30pm (giving us 3 hours of buffer time)[/B]

1. 2hit6
2. rx8-druggist
3. maffu313
4. rotary/boxer mike
5. footman
6. c_ls

Maybe 2pm is better?
Old 07-14-2010 | 09:25 AM
  #130  
Footman's Avatar
Dodging those Corollas
iTrader: (2)
 
Joined: Oct 2006
Posts: 4,637
Likes: 7
From: Stouffville, Ontario, Canada
2:30pm is more than enough time
Old 07-14-2010 | 10:48 AM
  #131  
Rotary Mike's Avatar
Registered 407 Abuser
 
Joined: Jul 2008
Posts: 769
Likes: 0
From: Markham/Mississauga
I'll leave work at 2PM, see how close I can get to K.C. by then. Andrew, do you have my cell number?
Old 07-14-2010 | 10:55 AM
  #132  
Footman's Avatar
Dodging those Corollas
iTrader: (2)
 
Joined: Oct 2006
Posts: 4,637
Likes: 7
From: Stouffville, Ontario, Canada
No, Boxermike, pm me again

So official Kennedy Commons meet time is 2:30pm,

*warning* there is a hidden bump in the parking lot between Chapters and TD Bank. The hidden bump is bad enough that I can scrape my car at low speeds. 2hit6's MS front won't stand a chance. This was the usual area for those Wednesday car meets.

I would say to meet at the other side right in between WILD WINGS and The Friendly Greek restaurant.

Then, we all roll out to UTSC and pick up Margaret

Last edited by Footman; 07-14-2010 at 10:57 AM.
Old 07-14-2010 | 11:21 AM
  #133  
REV-illusions's Avatar
rotary ninja
iTrader: (3)
 
Joined: May 2008
Posts: 1,297
Likes: 0
From: Toronto
Originally Posted by TheWulf
^ that looks wicked. I was planning to build one of those as part of my car PC build this winter but if anyone has a heads up on some good software it would save me a lot of work.
I'm in the middle of building my carputer right now... At first I was building my own lap timer/logger/program from scratch (I've already build the GPS / data logger), but came across some software which was relatively cheap enough to make me go "awww screw it" to the custom thing. I'll let ya know the details at the thing on Sat... don't have the info on me at the moment.
Old 07-14-2010 | 12:32 PM
  #134  
RXeckless's Avatar
Thread Starter
Rotorless
iTrader: (5)
 
Joined: Jul 2008
Posts: 1,135
Likes: 3
From: Delhi, ON Canada
O.K. Here's the amount you each pay, just in case of last minute bailer's:
All 16 show $50 per car
All 15 show $53 per car
All 14 show $57 per car
All 13 show $61 per car
All 12 show $66 per car
Please have exact change I'm not a bank!

All Attendees Please Arrive at the Track @ 5:00 PM to pay, sign waivers, get bracelets and have a driver's meeting. Passengers must sign waivers and get bracelets as well. Remember Quick Track Check List

• Fill-up on close to the track

• Check Tire Pressure

• Torque Wheel Lug Nuts to Spec

• Check Oil & Coolant Level


Thanks, in advance, to everyone who will be attending.
Old 07-14-2010 | 01:23 PM
  #135  
Footman's Avatar
Dodging those Corollas
iTrader: (2)
 
Joined: Oct 2006
Posts: 4,637
Likes: 7
From: Stouffville, Ontario, Canada
I have no torque wrench. Does anyone have one that will be on site?

Also, to fulfill Rxeckless' requirement for exact change, you must have the following in your pocket for all possible combinations of payment:

2 x 20 bill
2 x 10 bill
1 x 5 bill
1 x $1 coin
1 x $2 coin
Old 07-14-2010 | 01:27 PM
  #136  
Kafka's Avatar
Registered
 
Joined: May 2003
Posts: 1,972
Likes: 0
http://www.theweathernetwork.com/attractionsfx/caon8599

Not sure if its accurate but you know what, rain or shine track days are fun!

Sucks to those who bought R1s for over half a year and still don't have a chance to use it due to weather though...doh!

Have fun folks! And MAKE SURE PEOPLE TAKE PICTURES OF YOUR CAR SPITTING FIRE AT THE END OF TURN 1 - Camera should point to THE END of the back straight...

I got S2k guys saying "hey you got fire coming out of your exhaust at the backstraight! cool!" ... and I still don't have the picture #$$#&
Old 07-14-2010 | 01:44 PM
  #137  
RXeckless's Avatar
Thread Starter
Rotorless
iTrader: (5)
 
Joined: Jul 2008
Posts: 1,135
Likes: 3
From: Delhi, ON Canada
Originally Posted by Footman
I have no torque wrench. Does anyone have one that will be on site?

Also, to fulfill Rxeckless' requirement for exact change, you must have the following in your pocket for all possible combinations of payment:

2 x 20 bill 2 x 10 bill
1 x 5 bill
1 x $1 coin
1 x $2 coin
Thanks for the math, hopefully you'll only need 2 x 20 and 1 x 10 bills. I'll have my torque wrench. And I'm sure others will too.

Last edited by RXeckless; 07-14-2010 at 01:48 PM. Reason: 2 x 20 bill 2 x 10 bill
Old 07-14-2010 | 02:48 PM
  #138  
nate340's Avatar
Registered
 
Joined: May 2007
Posts: 832
Likes: 1
From: Long Point, Ontario, Canada
really excited about this, no matter what the weather i have tires for the job even if its sunny i think ill still do a few laps on my new less than 500km Pilot Sport A/S Plus.

i have to go pick up my new brake pads tomorrow and install them sometime between then and Friday.

Andrew really glad your coming out to the track.

what rules are we running? novice, two way signal passing or advanced, pass anywhere you feel is safe.
Old 07-14-2010 | 02:51 PM
  #139  
Footman's Avatar
Dodging those Corollas
iTrader: (2)
 
Joined: Oct 2006
Posts: 4,637
Likes: 7
From: Stouffville, Ontario, Canada
Yeah, but I'll be running some **** tires though, so traction will be poor even on dry. It's poor now in city driving, so track driving will definitely kill the rest of it.
Old 07-14-2010 | 03:18 PM
  #140  
RXeckless's Avatar
Thread Starter
Rotorless
iTrader: (5)
 
Joined: Jul 2008
Posts: 1,135
Likes: 3
From: Delhi, ON Canada
Originally Posted by nate340

what rules are we running? novice, two way signal passing or advanced, pass anywhere you feel is safe.
See Post #86 Attached PDF
https://www.rx8club.com/canada-forum-35/club-track-day-fabi-july-16th-2010-a-198273/page4/

Last edited by RXeckless; 07-14-2010 at 03:23 PM. Reason: Add #86
Old 07-14-2010 | 07:02 PM
  #141  
Thumper3322's Avatar
Registered
 
Joined: Oct 2007
Posts: 2,210
Likes: 0
From: Ajax, Ontario
I will have my torque wrench as well.

As long as there is a chance of it lightening up I'm bringing my R1s.

I will probably be there before everyone else (I think), I will be over at Fabi paddock as that's where I will be putting on my R1s.

I'm bringing a heavy jack so I can do two tires at once if anyone will need to borrow it.

Nate - read his well laid out instructions in short, passing only straights when person in front is signaling a pass.

Newbies - for those that haven't been practicing heel-toe, rev matching down shifting...get practicing!
Old 07-14-2010 | 08:28 PM
  #142  
RXeckless's Avatar
Thread Starter
Rotorless
iTrader: (5)
 
Joined: Jul 2008
Posts: 1,135
Likes: 3
From: Delhi, ON Canada
Originally Posted by Thumper3322
I will have my torque wrench as well.

I'm bringing a heavy jack so I can do two tires at once if anyone will need to borrow it.

Nate - read his well laid out instructions in short, passing only straights when person in front is signaling a pass.
I'll bring a 2 ton jack and stands as well.

Do you guys want passing in the corners? As well fabi has two or three real nasty corners, the signals are for safety and we have every level of driver from newbie to expert can't be a free for all. Thats another reason why we'll have a driver's meeting, air beefs then.

Is there anyone in the group who'd attempt a pass in turn 8,9 just before the back straight? why?

Last edited by RXeckless; 07-14-2010 at 08:36 PM. Reason: Is there anyone
Old 07-14-2010 | 10:17 PM
  #143  
Maffu313's Avatar
Registered
iTrader: (2)
 
Joined: Mar 2009
Posts: 760
Likes: 0
From: Toronto, Ontario
Are we still doing the triangle scotch tape on the rear windshield for newbies?

I'll also be bringing torque wrench...torque sticks...impact gun...

Oh and as for the Kennedy Commons meet, are we LEAVING at 2:30? or meeting there at 2:30 and leaving at like 2:45-3:00? since i'm pretty sure some people will arrive late
Old 07-14-2010 | 10:32 PM
  #144  
nate340's Avatar
Registered
 
Joined: May 2007
Posts: 832
Likes: 1
From: Long Point, Ontario, Canada
i have no issues with passing on the straights, as long as people actually do it. i don't know how many times I've been stuck behind someone for lap after lap and i end up wasting a hole session because someone else isn't following rules.

Andrew don't worry about your tires too much they will scrub in and do a pretty decent job.

who's going to see wulf on saturday? i have a rx8 rim id like to give him.

Last edited by nate340; 07-14-2010 at 10:45 PM.
Old 07-14-2010 | 10:53 PM
  #145  
Thief's Avatar
Reppin Lightning Yellow
 
Joined: Mar 2008
Posts: 1,451
Likes: 0
From: Scarlem
Let's not do passing in the corners. It's not just about newbies, it's the first track day of the year for some too. I say we take it easy for this first one.
Old 07-14-2010 | 11:01 PM
  #146  
Maffu313's Avatar
Registered
iTrader: (2)
 
Joined: Mar 2009
Posts: 760
Likes: 0
From: Toronto, Ontario
it now says it's only cloudy so far =] so no rain...YAY
Old 07-14-2010 | 11:04 PM
  #147  
Footman's Avatar
Dodging those Corollas
iTrader: (2)
 
Joined: Oct 2006
Posts: 4,637
Likes: 7
From: Stouffville, Ontario, Canada
Meet between 2:15 to 2:30.. Leave at 2:30... go to UTSC pick up Margaret at 2:45,, continue to Shannonville.
Old 07-14-2010 | 11:50 PM
  #148  
rx8-druggist's Avatar
Licensed Drug Dealer
 
Joined: Dec 2009
Posts: 420
Likes: 0
From: Markham, Ontario
Okaay will meet you guys at KC around 2:15 then !!!
Old 07-15-2010 | 05:40 AM
  #149  
RXeckless's Avatar
Thread Starter
Rotorless
iTrader: (5)
 
Joined: Jul 2008
Posts: 1,135
Likes: 3
From: Delhi, ON Canada
Originally Posted by nate340
i have no issues with passing on the straights, as long as people actually do it. i don't know how many times I've been stuck behind someone for lap after lap and i end up wasting a hole session because someone else isn't following rules.

Andrew don't worry about your tires too much they will scrub in and do a pretty decent job.

who's going to see wulf on saturday? i have a rx8 rim id like to give him.
Originally Posted by Thief
Let's not do passing in the corners. It's not just about newbies, it's the first track day of the year for some too. I say we take it easy for this first one.
Common sense prevails, as only 12 cars are allow on the track at any given time we'll have to figure out a way to break into two groups anyway. Group 1 Newbie/Beginners and Group 2 Intermediate/Advanced. The first hour will be the more difficult to achieve a balance on the track of the two groups, but hour two should smooth out as the bench racing starts. The first hour will be 15 minutes on -15 minutes off so everyone gets enough session time in the first hour, after that just go when the opportunity arises.

Everyone with any track experience will have marshal the pits for say 10 minutes after one of there sessions, I believe this this fair to everyone involved.

All cars will stay in the pits expect for mechanical issues/tire changes. Entering and exit the pits to/from the paddock has the be strictly controlled as it dangerous during a active track with cars from the track pitting and exiting.

Last edited by RXeckless; 07-15-2010 at 05:50 AM.
Old 07-15-2010 | 09:58 AM
  #150  
TheWulf's Avatar
My 8 looks like a Smurf
iTrader: (4)
 
Joined: Sep 2007
Posts: 1,742
Likes: 0
From: Ottawa, ON, Canada
Originally Posted by nate340
who's going to see wulf on saturday? i have a rx8 rim id like to give him.
Ahh I forgot about this

Thief and RXeckelss might be coming so either of them should do. If not then Shoot me a PM and I'll go meet up with you on my way back Sunday.


You have already rated this thread Rating: Thread Rating: 0 votes,  average.

Quick Reply: Club Track Day: FABI, July 16th, 2010



All times are GMT -5. The time now is 04:05 PM.