Good news regarding horsepower issue
#1
Registered
Thread Starter
Join Date: Jan 2002
Location: Waterloo
Posts: 191
Likes: 0
Received 0 Likes
on
0 Posts
Good news regarding horsepower issue
Check it out. I hope you guys change your minds about the buy back.
http://rotarynews.com/view.php?id=212
http://rotarynews.com/view.php?id=212
#3
Registered
Join Date: Mar 2003
Location: Ottawa,ON
Posts: 1,271
Likes: 0
Received 0 Likes
on
0 Posts
There is a dyno at a local meet this weekend here. I have a GS no DSC no TCS with this "explaination" my car should be performing on the dyno at 210whp?
I guess it is possible I test drove a 350z and it really didn't feel any faster, made more noise that's about it.
Still I'm going to take this opportunity to return the car, I might get another in the spring, I have yet to find another car I enjoy more.
I guess it is possible I test drove a 350z and it really didn't feel any faster, made more noise that's about it.
Still I'm going to take this opportunity to return the car, I might get another in the spring, I have yet to find another car I enjoy more.
#4
Registered User
Join Date: Jul 2003
Location: Ottawa, Ontario, Canada
Posts: 356
Likes: 0
Received 0 Likes
on
0 Posts
Originally posted by Wing
There is a dyno at a local meet this weekend here. I have a GS no DSC no TCS with this "explaination" my car should be performing on the dyno at 210whp?
There is a dyno at a local meet this weekend here. I have a GS no DSC no TCS with this "explaination" my car should be performing on the dyno at 210whp?
If the DSC system is completely disabled, this removes the brake functions from the equation, however it does not fully remove the engine management system functions.
The ABS hydraulic unit/control module (HU/CM), or the DSC HU/CM for cars with DSC, determines vehicle speed by comparing the speed of all four wheels. If two are turning and two are stationary, it will still compute a speed but senses that the car is experiencing excessive wheel spin. To protect against engine or catalyst damage:
The engine management system compares the throttle opening, gear selection (determined by engine speed and road speed) charging efficiency and engine coolant temperature to determine the driving condition.
Since the car is under heavy load, in a tall gear (testing is usually performed in third or fourth gear), with a wide throttle position angle (wide open), spark timing is reduced and the fuel mixture is richened to reduce the occurrence of spark knock and to reduce catalytic converter temperatures.
#5
Registered
Originally posted by Wing
There is a dyno at a local meet this weekend here. I have a GS no DSC no TCS with this "explaination" my car should be performing on the dyno at 210whp?
There is a dyno at a local meet this weekend here. I have a GS no DSC no TCS with this "explaination" my car should be performing on the dyno at 210whp?
Regards,
Gordon
Thread
Thread Starter
Forum
Replies
Last Post
9krpmrx8
Series I Trouble Shooting
23
11-05-2015 11:45 PM