Trunk Lip Spolier
#3
Thanks
Good suggestion... I'll do that. I read somewhere that this was standard on some newer models, which in that case the Mazda dealers should carry it but when I was in on Wednesday they didn't know anything about it?
#4
Registered
iTrader: (4)
Try http://www.evo-r.net/product/RX-8/CFS/CF_REAR.htm
This is a CF one. They also have a unpainted fiberglass piece.
This is a CF one. They also have a unpainted fiberglass piece.
#5
Registered User
Join Date: Apr 2007
Location: Burnaby, BC
Posts: 257
Likes: 0
Received 0 Likes
on
0 Posts
Try http://www.evo-r.net/product/RX-8/CFS/CF_REAR.htm
This is a CF one. They also have a unpainted fiberglass piece.
This is a CF one. They also have a unpainted fiberglass piece.
the one burnsy is talking about in the picture is much thinner than the evo-r.net one and does not go over the corner of the trunk, it just sits on the top cooner "lip". I've seen it in person installed on someone else's car and it's barely as wide as a thumb.
Last edited by burnaby rx-8; 08-23-2007 at 06:44 AM.
#6
Spinning Dorito Junkie
iTrader: (2)
Join Date: Jul 2003
Location: Halifax, Nova Scotia, Canada
Posts: 747
Likes: 0
Received 1 Like
on
1 Post
I have the Evo-R one on my car. Bought it from their never-ending "group buy" on this forum.
Looks and fit great. I went with the fibreglass and just had my favourite body shop paint it to match.
Looks and fit great. I went with the fibreglass and just had my favourite body shop paint it to match.
#7
Drive like you stole it!
Excellent taste Burnsy!
Don't get the Evo-r one....the one you want and in that pic you attached is the JDM one: http://www.japanparts.com/db/partsli...ey=091-029-001
This comes as standard on euro models due to the lower drag coeffiecient.
You can order it from japanparts.com, they are an official vendor on this forum, so you can PM Graham if you like (https://www.rx8club.com/showthread.php?t=104549)
They can be purchased pre-painted or not.
I bought mine last month pre-painted and I love it. No drilling needed or anything like that.
These pics were taken with my phone so quality is not ideal
Don't get the Evo-r one....the one you want and in that pic you attached is the JDM one: http://www.japanparts.com/db/partsli...ey=091-029-001
This comes as standard on euro models due to the lower drag coeffiecient.
You can order it from japanparts.com, they are an official vendor on this forum, so you can PM Graham if you like (https://www.rx8club.com/showthread.php?t=104549)
They can be purchased pre-painted or not.
I bought mine last month pre-painted and I love it. No drilling needed or anything like that.
These pics were taken with my phone so quality is not ideal
Last edited by GoesLikeStink; 08-23-2007 at 08:16 AM.
#8
'07 Galaxy Gray
Join Date: Aug 2007
Location: Rockville, MD
Posts: 31
Likes: 0
Received 0 Likes
on
0 Posts
#9
Excellent taste Burnsy!
Don't get the Evo-r one....the one you want and in that pic you attached is the JDM one: http://www.japanparts.com/db/partsli...ey=091-029-001
This comes as standard on euro models due to the lower drag coeffiecient.
You can order it from japanparts.com, they are an official vendor on this forum, so you can PM Graham if you like (https://www.rx8club.com/showthread.php?t=104549)
They can be purchased pre-painted or not.
I bought mine last month pre-painted and I love it. No drilling needed or anything like that.
These pics were taken with my phone so quality is not ideal
Don't get the Evo-r one....the one you want and in that pic you attached is the JDM one: http://www.japanparts.com/db/partsli...ey=091-029-001
This comes as standard on euro models due to the lower drag coeffiecient.
You can order it from japanparts.com, they are an official vendor on this forum, so you can PM Graham if you like (https://www.rx8club.com/showthread.php?t=104549)
They can be purchased pre-painted or not.
I bought mine last month pre-painted and I love it. No drilling needed or anything like that.
These pics were taken with my phone so quality is not ideal
Thanks! That one is a little bigger that the other one I ws looking at but it looks really nice on the car.
A member of our BCRX8 club showed me this one as well on Ebay:
http://cgi.ebay.com/ebaymotors/2004-...em280121157970
It comes unpainted but its a nice one as well.
Well now at least I have some options! I kind of like the fact that the one you highlighted comes painted already.
#10
Drive like you stole it!
It actually comes with 3 plastic studs that would be used if you intended to install with drilling.
But if you don't want to drill you can file off those plastic pegs. Two sides of the length of the spoiler are shipped with the tape, but I bought more 3M tape at canadian tire and lined the whole thing with the tape, and it is rock solid. I've had it on well over a month now and have washed the car multiple times and it doesn't budge and remains flush. That 3M is strong stuff
So to answer your question, no it's not flimsy at all. Obviously if it was a big gaudy wing or something heavy the tape would not work, but the JDM spoiler is very low profile and light so the tape more will more than suffice.
But if you don't want to drill you can file off those plastic pegs. Two sides of the length of the spoiler are shipped with the tape, but I bought more 3M tape at canadian tire and lined the whole thing with the tape, and it is rock solid. I've had it on well over a month now and have washed the car multiple times and it doesn't budge and remains flush. That 3M is strong stuff
So to answer your question, no it's not flimsy at all. Obviously if it was a big gaudy wing or something heavy the tape would not work, but the JDM spoiler is very low profile and light so the tape more will more than suffice.
#11
Drive like you stole it!
Thanks! That one is a little bigger that the other one I ws looking at but it looks really nice on the car.
A member of our BCRX8 club showed me this one as well on Ebay:
http://cgi.ebay.com/ebaymotors/2004-...em280121157970
It comes unpainted but its a nice one as well.
Well now at least I have some options! I kind of like the fact that the one you highlighted comes painted already.
A member of our BCRX8 club showed me this one as well on Ebay:
http://cgi.ebay.com/ebaymotors/2004-...em280121157970
It comes unpainted but its a nice one as well.
Well now at least I have some options! I kind of like the fact that the one you highlighted comes painted already.
That one on ebay I would not go near. It's not specifically made for the rx8. The rx8 has very curved trunk when compared to the TL or the 3 series, which are practically straight.
If you can take a look at that one in person then by all means consider it but it is not made specifically for the 8 like the evo-r or the JDM one.
#13
Registered User
Join Date: Apr 2007
Location: Burnaby, BC
Posts: 257
Likes: 0
Received 0 Likes
on
0 Posts
That one on ebay I would not go near. It's not specifically made for the rx8. The rx8 has very curved trunk when compared to the TL or the 3 series, which are practically straight.
If you can take a look at that one in person then by all means consider it but it is not made specifically for the 8 like the evo-r or the JDM one.
If you can take a look at that one in person then by all means consider it but it is not made specifically for the 8 like the evo-r or the JDM one.
As far as the 3M tape used to attach these lip type spoilers is concerned, no it is not too flimsy for this application. Anyone who knows much about body kits knows that 3M tape is more than strong enough especially for something as small, thin, and light as a lip spoiler. When set and dry you can pull pretty hard and even pry with tools and they don't budge much at all unless you apply some kind of solvent to desolve the sticking agent. Drilling would definately be overkill, kind of like drilling into your dash to attach your liquid air freshener.
Thread
Thread Starter
Forum
Replies
Last Post
RAVSPEC
Vendor Classifieds
0
10-01-2015 01:59 PM
Rote8
Series I Interior, Audio, and Electronics
1
09-22-2015 03:43 PM