Notices
Far East/Asia Serving the Far East

4AT excess vibrations when air con cuts in

Thread Tools
 
Search this Thread
 
Rate Thread
 
Old 02-20-2005 | 08:33 AM
  #26  
Manwe's Avatar
Zoom zoom!
 
Joined: Jul 2004
Posts: 470
Likes: 0
From: World Wide Web
Originally Posted by 8citing
don't think anyone knows how to fix it... juz need to tune it. i realise my 8 is idling too lean...abt 700rpm. when ac cuts in, it drops to 600rpm.

anyone knows how to increase the idle rpm to 900? mechanic claims it's electronic throttle, so can't be adjusted.....
Don't think it is too lean. It is the amount of air that enters the chamber. Even if you inject more fuel and burn richer, you will still have the same rpm but slightly cooler exhaust. Get someone to check the valve?
Old 02-20-2005 | 08:43 AM
  #27  
8citing's Avatar
Thread Starter
Registered User
 
Joined: Aug 2004
Posts: 112
Likes: 0
which valves? do u know any place who's competent? my pi mechanic sucks.

i realise when i start the car in the morning, the rpm will go up to 2000 then slowly settle to 1000 after a short while. no vibrations when i drive then. after the temp reaches half, the rpm drops to 700...
Old 02-20-2005 | 09:08 PM
  #28  
Naughty Boy's Avatar
Registered User
 
Joined: Oct 2003
Posts: 518
Likes: 0
From: Singapore
Hi 8citing. If it's any consolation, me have the same problem as u and it interrupts me nap!

Apparently it's normal for our RX - so nothing can be done... But if u do find a way out, pls let me know! Cheers!
Old 02-20-2005 | 09:14 PM
  #29  
watoke's Avatar
RX-8の魅力満載
 
Joined: Sep 2004
Posts: 395
Likes: 0
From: Planet Earth
I been driving for the past 2mths + ..hmm...apparently the vibration is there when the aircon kicks in too....but not that obvious and bearable. Perhaps a good grounding and voltage stablizer will be good? any comments?
Old 02-21-2005 | 12:56 AM
  #30  
8citing's Avatar
Thread Starter
Registered User
 
Joined: Aug 2004
Posts: 112
Likes: 0
Naughty, glad u could bear with it.

Watoke, i think it was neon who told me his 8 vibrations were reduced after changing the spark plugs. He also had volt stabilizer and ground kit if i'm correct; but didn't help much.

I'm thinking of the carzoomer/unichip. But need to find out how much can the AFR be tuned....
Old 02-21-2005 | 01:57 AM
  #31  
rayshaw23's Avatar
Registered
 
Joined: May 2004
Posts: 170
Likes: 0
From: Singapore
hm.... i am driving AT also.... i find that i have those vibration when i engage reverse.... sometimes when i engage 'D', it does vibrate excessively, but not severe as compared to when i engage the reverse gear.... anyone experiencing this problem too? i always engage to 'P' and rev a little to stop the vibration.
Old 02-23-2005 | 07:46 AM
  #32  
SONE's Avatar
S-ONE
 
Joined: Aug 2004
Posts: 52
Likes: 0
Hi guys, tune in late.....my mechanic told me our engine mounting consists only 2 (can someone verify this), so it tends to vibrate more than other normal cars
especially when you're driving in hot days than at night(cooler),anyone agree with that? I m pretty sure other sedan cars have more than 2 engine mountings.

Any experts outda, pls confirm how many engine mountings our RX8 have???
Some sedan cars already 5 years old but dun vibrate that much & it won't be due to our idling control valve cos some of us driving it less than 1/2 year!
Old 02-23-2005 | 08:14 AM
  #33  
intrega's Avatar
Registered
 
Joined: Sep 2003
Posts: 60
Likes: 0
From: sg (east)
[QUOTE=SONE]Hi guys, tune in late.....my mechanic told me our engine mounting consists only 2 (can someone verify this), so it tends to vibrate more than other normal cars
especially when you're driving in hot days than at night(cooler),anyone agree with that?

dunno abt other bro here, but my 8 virbrate the same during day or nite.
Old 02-23-2005 | 08:40 AM
  #34  
8citing's Avatar
Thread Starter
Registered User
 
Joined: Aug 2004
Posts: 112
Likes: 0
SONE, its true the vibrations are more pronounced when the ambient temperature is hotter.

Also, the 8 has only 2 engine mounts. But these mounts are larger than normal sedans'.
Old 02-23-2005 | 12:35 PM
  #35  
sgrenesis's Avatar
THE GREAT WHITE
 
Joined: Aug 2004
Posts: 825
Likes: 0
agree. if its right in the hot sun then its shaking real bad.

BTW guys, have problem with the brakes. they squeal like anything plus its both irritating and embarassing. For those who got their problem solved by MM please let me know what they did so i can feed back to PI and if they still dont rectify it then its time to get cambodian on their A** 24/7
Old 02-23-2005 | 01:11 PM
  #36  
sqflyer's Avatar
Heavy Machinery Operator
 
Joined: May 2004
Posts: 1,603
Likes: 0
From: Singapore (East)
sgren, MM simply changed the brake pads of those who have squealing brakes but apparently woot's brakes started squealing again. *shrug* Not sure about others who had their brake pads replaced by MM.
Old 02-23-2005 | 07:36 PM
  #37  
ethan113's Avatar
Registered User
 
Joined: Jun 2004
Posts: 47
Likes: 0
From: Bedok North Singapore
Asked a few of my mechanic friends about the squeal...they say good brake pads definitely will squeal....so they tell me change pads also no use...after a while it will squeal again. hope this helps becos mine also make a lot of noise.
Old 02-23-2005 | 09:02 PM
  #38  
watoke's Avatar
RX-8の魅力満載
 
Joined: Sep 2004
Posts: 395
Likes: 0
From: Planet Earth
think once in a while go to the tire shop and use the "air blower" thing and spray on the brakes. it helps.
Old 03-10-2005 | 03:50 PM
  #39  
jremix's Avatar
Registered User
 
Joined: Mar 2005
Posts: 2
Likes: 0
Engine mounts

I had been complaining about the vibration since the day I bought it...Im getting the Engine mounts replaced this monday lets see what happens...
Old 03-10-2005 | 06:10 PM
  #40  
watoke's Avatar
RX-8の魅力満載
 
Joined: Sep 2004
Posts: 395
Likes: 0
From: Planet Earth
Originally Posted by jremix
I had been complaining about the vibration since the day I bought it...Im getting the Engine mounts replaced this monday lets see what happens...
U got your 8 thru MM?
Old 03-10-2005 | 09:59 PM
  #41  
intrega's Avatar
Registered
 
Joined: Sep 2003
Posts: 60
Likes: 0
From: sg (east)
Originally Posted by jremix
I had been complaining about the vibration since the day I bought it...Im getting the Engine mounts replaced this monday lets see what happens...
cool bro... let keep us updated
Old 03-11-2005 | 04:58 AM
  #42  
sbu12g's Avatar
love
 
Joined: Mar 2004
Posts: 40
Likes: 0
From: east
brake sound

brake sound could have been caused by soap u use in car wash. thats wat the mecahnics say...
Old 05-07-2005 | 06:07 PM
  #43  
khoney's Avatar
FX8TED on my RX-8
 
Joined: Jul 2002
Posts: 815
Likes: 0
From: San Antonio
Originally Posted by jremix
I had been complaining about the vibration since the day I bought it...Im getting the Engine mounts replaced this monday lets see what happens...
If you're still around, can you tell us if that fixed the problem? I have a problem so bad it seems like the doors will fall off the hinges when they're open. Next service guy who tells me its normal is gonna get busted in the chops.
Old 05-09-2005 | 01:19 PM
  #44  
virus's Avatar
Registered User
 
Joined: Apr 2005
Posts: 67
Likes: 0
i guess its normal for 8 to vibrate ...like wat is in the previous treads, the 8 has only 2 mounting. i got mine replaced a year ago....it decrease the level of vibration. Hence you guys can try to replaced it. i did it in MOVA . Hope this helps..
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
WranglerFan
New Member Forum
9
08-21-2022 02:29 PM
tommy26Germany
Series I Trouble Shooting
11
09-29-2015 11:33 AM
FubarI33t
New Member Forum
12
09-28-2015 09:45 PM
Learners_Permit
Series I Interior, Audio, and Electronics
8
09-27-2015 08:38 PM
patriotjj
New Member Forum
5
09-13-2015 09:09 AM



You have already rated this thread Rating: Thread Rating: 0 votes,  average.

Quick Reply: 4AT excess vibrations when air con cuts in



All times are GMT -5. The time now is 04:21 PM.