Malaysia RX8 Database
#4801
Nightmares be gone...!!!
Join Date: Aug 2006
Location: K.L, Malaysia
Posts: 648
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by wangan
This link below goes to page 120. For other page number, just change the last 3 digits.
https://www.rx8club.com/far-east-asia-38/malaysia-rx8-database-59433/page120/
https://www.rx8club.com/far-east-asia-38/malaysia-rx8-database-59433/page120/
Thx bro.....much appreciated .....
#4802
Originally Posted by wangan
The RE bumper with fog lamp is RM3500. not sure if it comes with fog lamp.
Why not get the one without fog lamp? I have it in stock.
Tsunami bumper is it JDM?
Why not get the one without fog lamp? I have it in stock.
Tsunami bumper is it JDM?
i like it with the fog lamp
JDM? what is that?
#4803
Nightmares be gone...!!!
Join Date: Aug 2006
Location: K.L, Malaysia
Posts: 648
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by K.Tan
i like it with the fog lamp
JDM? what is that?
JDM? what is that?
JDM = Japan Domestic Model
Which means......is it from a Japanese manufacturer.......
From what i know, Tsunami Kits are from USA
#4804
Originally Posted by effie
JDM = Japan Domestic Model
Which means......is it from a Japanese manufacturer.......
From what i know, Tsunami Kits are from USA
Which means......is it from a Japanese manufacturer.......
From what i know, Tsunami Kits are from USA
ohhh... thank you effie
i think so too
wangan how long RE front bumper with fog lamp takes to arrive?
how much is fabulous rear bumper?
#4805
Originally Posted by K.Tan
ohhh... thank you effie
i think so too
wangan how long RE front bumper with fog lamp takes to arrive?
how much is fabulous rear bumper?
i think so too
wangan how long RE front bumper with fog lamp takes to arrive?
how much is fabulous rear bumper?
Japanese bodykit company doesn't stock bodykits. Usually take about 3-4 weeks to make then take somemore time to ship out.
Fabulous sport rear bumper = RM3k.
#4807
Registered User
Join Date: Jul 2005
Location: KL, Malaysia
Posts: 394
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by Rotorazda
anyone went for the extreme night yesterday?
only one black RX8 over there
only one black RX8 over there
Quote:
Originally Posted by Rotorazda
i guess everyone was busy.
...well...its raining heavily as well...
anyhow...based on ur avatar....i've seen it b4........
do u stay near OUG???...its a double digit rite??(i think la...)...
#4809
Originally Posted by wangan
If you order now, can get end of the year for RE Bumper with fog lamp.
Japanese bodykit company doesn't stock bodykits. Usually take about 3-4 weeks to make then take somemore time to ship out.
Fabulous sport rear bumper = RM3k.
Japanese bodykit company doesn't stock bodykits. Usually take about 3-4 weeks to make then take somemore time to ship out.
Fabulous sport rear bumper = RM3k.
what!? so long... i need it soon do u know where else i can get?
Fabulous rear bumper got stock?
#4812
Originally Posted by K.Tan
what!? so long... i need it soon do u know where else i can get?
Fabulous rear bumper got stock?
Fabulous rear bumper got stock?
I don't think anyone in Malaysia stock Fabulous rear bumper.
#4813
Originally Posted by wangan
Yes it takes time to make bodykit and ship here.
I don't think anyone in Malaysia stock Fabulous rear bumper.
I don't think anyone in Malaysia stock Fabulous rear bumper.
damn... wangan how long will it to take to change engine mounting?
#4821
lennon this is what i found in the forum, my Question is, is there a turbo kit for auto?:
To: All Staff
From: Benny Ishii
Date: June 29, 2006
Re: RX-8 Turbo kit change to emanage Ultimate
This memo is in regards to changes in the RX-8 turbo kit. As of now, all of the RX-8 turbo kits will include the emanage Ultimate, along with a few other changes. Here are the list of changes made to the kit.
1. Emanage changed to Emanage Ultimate
2. Changes in the Plug and play harness include:
※ The use of ignition harness
※ Controlling the intake ports to utilize best combination for smooth driving and
better performance
※ Removal of RPM adapter and Water Temp Sensor adapter from harness.
※ Changing target air fuel ratio with special 02 sensor adapter so vehicle does
not run lean in closed loop operation.
3. Addition of intake manifold block plate to stabilize boost at higher RPM and increase boost response.
4. Changed location of Jet Air Fuel mixing hose from airnix to fitting welded to the compression tube connected to the throttle body. This prevent boost pressure from escaping the intake manifold and will allow constant flow towards the intake manifold.
5. This tune is confirmed to be good for 0.45 kg. Anything above that will need to be fine tuned.
6. Included an orifice fitting to smoothen out pressure signals to the GReddy Pressure sensor. This will stabilize the pressure readings so tuning is more consistent.
An update kit will also be available for those that want to convert from the old emanage RX-8 turbo kits to emanage ultimate. This will include four parts: Emanage Ultimate Harness, Emanage Ultimate, Intake Manifold Plate, and Orifice Fitting. For the update, the customer will need to cut the provided 10mm aluminum tube provided in the older RX-8 kit and weld it to the compression pipe. If they cannot perform this, they can send the parts to us and we will weld it for them on our jig.
New Part numbers and prices have not been set as of yet, but will be determined ASAP.
Thanks.
Benny
To: All Staff
From: Benny Ishii
Date: June 29, 2006
Re: RX-8 Turbo kit change to emanage Ultimate
This memo is in regards to changes in the RX-8 turbo kit. As of now, all of the RX-8 turbo kits will include the emanage Ultimate, along with a few other changes. Here are the list of changes made to the kit.
1. Emanage changed to Emanage Ultimate
2. Changes in the Plug and play harness include:
※ The use of ignition harness
※ Controlling the intake ports to utilize best combination for smooth driving and
better performance
※ Removal of RPM adapter and Water Temp Sensor adapter from harness.
※ Changing target air fuel ratio with special 02 sensor adapter so vehicle does
not run lean in closed loop operation.
3. Addition of intake manifold block plate to stabilize boost at higher RPM and increase boost response.
4. Changed location of Jet Air Fuel mixing hose from airnix to fitting welded to the compression tube connected to the throttle body. This prevent boost pressure from escaping the intake manifold and will allow constant flow towards the intake manifold.
5. This tune is confirmed to be good for 0.45 kg. Anything above that will need to be fine tuned.
6. Included an orifice fitting to smoothen out pressure signals to the GReddy Pressure sensor. This will stabilize the pressure readings so tuning is more consistent.
An update kit will also be available for those that want to convert from the old emanage RX-8 turbo kits to emanage ultimate. This will include four parts: Emanage Ultimate Harness, Emanage Ultimate, Intake Manifold Plate, and Orifice Fitting. For the update, the customer will need to cut the provided 10mm aluminum tube provided in the older RX-8 kit and weld it to the compression pipe. If they cannot perform this, they can send the parts to us and we will weld it for them on our jig.
New Part numbers and prices have not been set as of yet, but will be determined ASAP.
Thanks.
Benny
#4822
Originally Posted by theboy
Wangan is the black 8 yours? but which babe is yours?
Also, yes, the black 8 is mine : )
I got a few Varis Hood coming next month.
Wangan girls are wearing Chargespeed uniform and you can easily differentiate them from the rest. Unfortunately, they aren't in Goober's photos. Will upload them when I get the chance.