RE-AMEMIYA's 2nd visit to S'pore
#1
SC 300HP!!
Thread Starter
Join Date: Dec 2004
Location: Singapore, North-east
Posts: 3,182
Likes: 0
Received 0 Likes
on
0 Posts
RE-AMEMIYA's 2nd visit to S'pore
Dear All,
Staff from RE-Amemiya are coming down to do up a few projects and of course, to do the re-map of rx8 ECUs.
Due to the OVERWHELMING response we have received so far, we may not be able to cater to all members. However, we will try to satify every member of the forum who are interested.
Dates: 30th Nov and 1st Dec tentative
As for how effective and what it can do, i tink the previous thread has more than explained enough. For reference, pls refer to the last thread.
This time round, Mr ISAMI AMEMIYA, himself, is coming down to Singapore on 1st to 2nd December to meet up with all the rotary engine members.
Since 1st is a Friday, i hope to arrrange a meetup with all the rotary fans, rx7 FD n FC included, together with Mr Amemiya. Pls make urself available to meet up with the renowned "rotary god" from Japan. Magazine shoots will be arranged as well.
*For pricing details, pls refer to Monster Garage for more info.
Staff from RE-Amemiya are coming down to do up a few projects and of course, to do the re-map of rx8 ECUs.
Due to the OVERWHELMING response we have received so far, we may not be able to cater to all members. However, we will try to satify every member of the forum who are interested.
Dates: 30th Nov and 1st Dec tentative
As for how effective and what it can do, i tink the previous thread has more than explained enough. For reference, pls refer to the last thread.
This time round, Mr ISAMI AMEMIYA, himself, is coming down to Singapore on 1st to 2nd December to meet up with all the rotary engine members.
Since 1st is a Friday, i hope to arrrange a meetup with all the rotary fans, rx7 FD n FC included, together with Mr Amemiya. Pls make urself available to meet up with the renowned "rotary god" from Japan. Magazine shoots will be arranged as well.
*For pricing details, pls refer to Monster Garage for more info.
#2
SC 300HP!!
Thread Starter
Join Date: Dec 2004
Location: Singapore, North-east
Posts: 3,182
Likes: 0
Received 0 Likes
on
0 Posts
we have 4 major projects going on during their trip here.... the amount re-mapping of ecus may be cut down to facilitate the project.
Mr Amemiya is coming down on the 2nd and 3rd, instead of 1st n 2nd. Hope to have all ur support!
Mr Amemiya is coming down on the 2nd and 3rd, instead of 1st n 2nd. Hope to have all ur support!
#3
A wanker with the Wenkel
Join Date: Oct 2005
Location: Singapore
Posts: 323
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by coupe07
we have 4 major projects going on during their trip here.... the amount re-mapping of ecus may be cut down to facilitate the project.
Mr Amemiya is coming down on the 2nd and 3rd, instead of 1st n 2nd. Hope to have all ur support!
Mr Amemiya is coming down on the 2nd and 3rd, instead of 1st n 2nd. Hope to have all ur support!
#4
SC 300HP!!
Thread Starter
Join Date: Dec 2004
Location: Singapore, North-east
Posts: 3,182
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by lowrider
Can I assume that its first booking/come first serve? Example: I send a request back in Sept, I assume that i am higher up the list than someone who requested in Oct?
To be frank, response is over whelming and as mentioned in my previous post, there are 4 major projects to be completed before we will even touch the remapping part.
Dun worry, theres still knight sports to come and do the remap. u miss this chance, theres another chance.
#5
i don't know but i think it's typical chinese thinking or perhaps just me....
RE remap is tested and done in many of for our local bros... so in a way i'm more comfortable with it
KS so far as what i knw only 1 car in singapore have done his remap by them. so i think if you ask me..... my only recommendation is
PLS PLS PLS ask RE to come again soon after this trip cause i was called for overseas exercise this time round and can't get it done.... hahaa
RE remap is tested and done in many of for our local bros... so in a way i'm more comfortable with it
KS so far as what i knw only 1 car in singapore have done his remap by them. so i think if you ask me..... my only recommendation is
PLS PLS PLS ask RE to come again soon after this trip cause i was called for overseas exercise this time round and can't get it done.... hahaa
#6
SC 300HP!!
Thread Starter
Join Date: Dec 2004
Location: Singapore, North-east
Posts: 3,182
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by madmax_rx8
i don't know but i think it's typical chinese thinking or perhaps just me....
RE remap is tested and done in many of for our local bros... so in a way i'm more comfortable with it
KS so far as what i knw only 1 car in singapore have done his remap by them. so i think if you ask me..... my only recommendation is
PLS PLS PLS ask RE to come again soon after this trip cause i was called for overseas exercise this time round and can't get it done.... hahaa
RE remap is tested and done in many of for our local bros... so in a way i'm more comfortable with it
KS so far as what i knw only 1 car in singapore have done his remap by them. so i think if you ask me..... my only recommendation is
PLS PLS PLS ask RE to come again soon after this trip cause i was called for overseas exercise this time round and can't get it done.... hahaa
the remap is pretty standard for NA setup. Like i always said, theres always so much u can do for NA setup...... of cos if u wan to wait for RE, no problem. But they will only come when there is "big project", if not no point bring them here juz to do remapping.
Initially a lot of pple (u noe who u r) oso doubts RE-Amemiya remap when they came over for the first time. Its only the first few people or heroes who did, and reviewed then it became good.
Frankly speaking, if u r running on NA setup which 95% of the rx8 in spore are, these remaps are similar.
Let me noe ur view.
#7
Registered User
Join Date: Mar 2006
Location: KL, Msia.
Posts: 178
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by coupe07
wats wrong with KS remap???
the remap is pretty standard for NA setup. Like i always said, theres always so much u can do for NA setup...... of cos if u wan to wait for RE, no problem. But they will only come when there is "big project", if not no point bring them here juz to do remapping.
Initially a lot of pple (u noe who u r) oso doubts RE-Amemiya remap when they came over for the first time. Its only the first few people or heroes who did, and reviewed then it became good.
Frankly speaking, if u r running on NA setup which 95% of the rx8 in spore are, these remaps are similar.
Let me noe ur view.
the remap is pretty standard for NA setup. Like i always said, theres always so much u can do for NA setup...... of cos if u wan to wait for RE, no problem. But they will only come when there is "big project", if not no point bring them here juz to do remapping.
Initially a lot of pple (u noe who u r) oso doubts RE-Amemiya remap when they came over for the first time. Its only the first few people or heroes who did, and reviewed then it became good.
Frankly speaking, if u r running on NA setup which 95% of the rx8 in spore are, these remaps are similar.
Let me noe ur view.
#8
Registered User
Join Date: Mar 2006
Location: KL, Msia.
Posts: 178
Likes: 0
Received 0 Likes
on
0 Posts
Was surfing around Racing Beat's website (www.racingbeat.com) and found a section on their version of PCM Flash. I have copied and paste the intial bits of their writeup for a quick readup. There's more in their website.
Quote:-
Flash Features
There are 3 specific areas where Racing Beat modifies the PCM data:
1. We optimize the fuel maps for best power. No changes were made (or needed) below 3500 RPM, and most changes were above 8000 RPM. This is where the stock mixture goes substantially rich, wasting fuel and power. Review Dyno Chart
2. We changed the rev limiter from 9000 RPM to 9300 RPM to take advantage of the increased power available at that RPM once the mixture is changed. Testing has shown that 9300 is an acceptable RPM for the engine. Mazda chose 9000 in part because power was dropping so fast at 9000 there was no point to revving further. Now, that is not true.
3. We lowered the ON temperatures for the electric cooling fans to improve engine cooling and avoid water temperature spikes. #1 fan now turns on at 87 degrees C (stock - 97 C) and #2 fan turns on at 90 degrees C (stock - 101 C).
-Unquote.
any feed backs on that?
Quote:-
Flash Features
There are 3 specific areas where Racing Beat modifies the PCM data:
1. We optimize the fuel maps for best power. No changes were made (or needed) below 3500 RPM, and most changes were above 8000 RPM. This is where the stock mixture goes substantially rich, wasting fuel and power. Review Dyno Chart
2. We changed the rev limiter from 9000 RPM to 9300 RPM to take advantage of the increased power available at that RPM once the mixture is changed. Testing has shown that 9300 is an acceptable RPM for the engine. Mazda chose 9000 in part because power was dropping so fast at 9000 there was no point to revving further. Now, that is not true.
3. We lowered the ON temperatures for the electric cooling fans to improve engine cooling and avoid water temperature spikes. #1 fan now turns on at 87 degrees C (stock - 97 C) and #2 fan turns on at 90 degrees C (stock - 101 C).
-Unquote.
any feed backs on that?
Last edited by clarencel; 10-25-2006 at 07:18 AM.
#9
Heavy Machinery Operator
Join Date: May 2004
Location: Singapore (East)
Posts: 1,603
Likes: 0
Received 0 Likes
on
0 Posts
From some of the testing I've done with my stock ECU vs a piggybacked ECU 8 and looking at his dyno chart, it seems that most of his power gains over my stock ECU were actually in low rpm range up to 4K rpm. So personally, I find it somewhat strange that Racing Beat claims that no changes are needed below 3500 rpm. Comments?
#11
Originally Posted by coupe07
wats wrong with KS remap???
Let me noe ur view.
Let me noe ur view.
I just meant that i'm a typical chinese... so many bros try RE remap already and sucessful and feed back good so i more comfortable lor..
![Rollinglaugh](https://www.rx8club.com/images/smilies/rollinglaugh.gif)
regards
Kelvin Koh
#12
SC 300HP!!
Thread Starter
Join Date: Dec 2004
Location: Singapore, North-east
Posts: 3,182
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by madmax_rx8
Bro don't get me wrong i never say KS remap no good...
I just meant that i'm a typical chinese... so many bros try RE remap already and sucessful and feed back good so i more comfortable lor..
regards
Kelvin Koh
I just meant that i'm a typical chinese... so many bros try RE remap already and sucessful and feed back good so i more comfortable lor..
![Rollinglaugh](https://www.rx8club.com/images/smilies/rollinglaugh.gif)
regards
Kelvin Koh
its abt the same..... there are also many pple waiting for Knights sports to turn up.....
#14
SC 300HP!!
Thread Starter
Join Date: Dec 2004
Location: Singapore, North-east
Posts: 3,182
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by clarencel
so, are the reflash figures by RE and KS the same as RacingBeat? if not what are their targeted firgures?
i also do not agree on the point where they said "Mazda chose 9000 in part because power was dropping so fast at 9000 there was no point to revving further. Now, that is not true"....
its actually true, if u refer to all of the japan tuners dyno-ed charts. At very high rpm, HP began to drop. If only one tuner showed that, yes maybe wrong. ALmost all tuners' dynoed charts showed the same thing... now.. all of them wrong?? cannot be...
as for cooling temperatures... lets not tok abt wat temp the fans kicked in.... REAL experience, my watertemp is nvr more than 90 during day time driving... sometimes spirited.
Most of ur queries are answered in previous thread. As for wat sort of figures, u have to let us noe wat u r looking at.
#15
Registered User
Join Date: Mar 2006
Location: KL, Msia.
Posts: 178
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by coupe07
wat sort of figures are u looking at??? like i said for NA setup, most reflashes are similar. Even racing beat, although i dun agree on the part on low rpms becos butt feel, low rpms does feel faster n smoother.
i also do not agree on the point where they said "Mazda chose 9000 in part because power was dropping so fast at 9000 there was no point to revving further. Now, that is not true"....
its actually true, if u refer to all of the japan tuners dyno-ed charts. At very high rpm, HP began to drop. If only one tuner showed that, yes maybe wrong. ALmost all tuners' dynoed charts showed the same thing... now.. all of them wrong?? cannot be...
as for cooling temperatures... lets not tok abt wat temp the fans kicked in.... REAL experience, my watertemp is nvr more than 90 during day time driving... sometimes spirited.
Most of ur queries are answered in previous thread. As for wat sort of figures, u have to let us noe wat u r looking at.
i also do not agree on the point where they said "Mazda chose 9000 in part because power was dropping so fast at 9000 there was no point to revving further. Now, that is not true"....
its actually true, if u refer to all of the japan tuners dyno-ed charts. At very high rpm, HP began to drop. If only one tuner showed that, yes maybe wrong. ALmost all tuners' dynoed charts showed the same thing... now.. all of them wrong?? cannot be...
as for cooling temperatures... lets not tok abt wat temp the fans kicked in.... REAL experience, my watertemp is nvr more than 90 during day time driving... sometimes spirited.
Most of ur queries are answered in previous thread. As for wat sort of figures, u have to let us noe wat u r looking at.
My apologies for being vague.
I'm not looking for a particular figure or figures. It's just that after reading the RacingBeat article, I was just wondering what figures are RE and KS working on.
I can appreciate that u're getting good temps below 90 for cooling temps. And I do agree it's a good temp.
I queried for figures mainly to gain some knowledge and have some numbers to compare between tuners. And I'm thinking it's a nice-to-know facts if one were to think about investing in reflashing their ECUs
Thanks for the feedback.
#19
Registered User
Join Date: Feb 2005
Location: Kuala Lumpur
Posts: 220
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by lowrider
Virus... what is Window 95? When I boot-up, my computer says its Window 3.2.
Is yours the latest version of Windows? I want it.
Is yours the latest version of Windows? I want it.
#21
The 8th Deadly Sin
Join Date: Jan 2005
Location: Root Creek
Posts: 300
Likes: 0
Received 0 Likes
on
0 Posts
Ivan
Have sent a couple of e-mails to monsterg with regards to shipping you my ECU for the re-map the past week. Appreciate any feedback as soon as youre able. Thanks.
Ray
Have sent a couple of e-mails to monsterg with regards to shipping you my ECU for the re-map the past week. Appreciate any feedback as soon as youre able. Thanks.
Ray
#22
Coupe07
You gotta let us know if we can send our ECU to you?
Is there any more slots etc etc....if theres no more slot then we wont have to wonder....appreciate if you can update us here
Cheers
You gotta let us know if we can send our ECU to you?
Is there any more slots etc etc....if theres no more slot then we wont have to wonder....appreciate if you can update us here
Cheers
#23
SC 300HP!!
Thread Starter
Join Date: Dec 2004
Location: Singapore, North-east
Posts: 3,182
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by Rotary_Addict
Coupe07
You gotta let us know if we can send our ECU to you?
Is there any more slots etc etc....if theres no more slot then we wont have to wonder....appreciate if you can update us here
Cheers
You gotta let us know if we can send our ECU to you?
Is there any more slots etc etc....if theres no more slot then we wont have to wonder....appreciate if you can update us here
Cheers
Of course on our end, we will try to fulfill everyone's wish to remap. However like i mentioned, there is an overwhelming response. There a few from malaysia. One from brunei is on the way. And the number of singaporeans wanting to this. besides all these, there are the bigger projects.
Let me know ur figures and i will revert according.
#25
Guys,,need yours help......
Do you guys know any good and cheap hotel near monster garage which has a good and secure car park ?
Need to stay one nite in Sg for the RE remap thingy...
oh i am from KL
thanks
Do you guys know any good and cheap hotel near monster garage which has a good and secure car park ?
Need to stay one nite in Sg for the RE remap thingy...
oh i am from KL
thanks