RX8Club.com
This is the exact nomenclature of the Viton gasket sheeting, if anyone is needing to make some gaskets (evidently the Pettit originals rarely survive more than one installation due to engine heat).
This is the exact nomenclature of the Viton gasket sheeting, if anyone is needing to make some gaskets (evidently the Pettit originals rarely survive more than one installation due to engine heat).
0 2019/03/31 20:36:45
The new gauge material on the left is almost exactly the same thickness as the older (and very fried, torn up) original Pettit gasket material. I think it'll work smashingly.
The new gauge material on the left is almost exactly the same thickness as the older (and very fried, torn up) original Pettit gasket material. I think it'll work smashingly.
0 2019/03/31 20:36:44
I had previously cut my gaskets from the brown Karropak paper-like gasket material, but I started to think that it was too thin - so I ordered some 1/16" Viton sheet and used a silver marker to trace the previous gaskets, and a scalpel to cut out some thicker ones.
I had previously cut my gaskets from the brown Karropak paper-like gasket material, but I started to think that it was too thin - so I ordered some 1/16" Viton sheet and used a silver marker to trace the previous gaskets, and a scalpel to cut out some thicker ones.
0 2019/03/31 20:36:42
Got my Bennett Built aluminum coolant tank setup! Had to buy separate caps but that's fine, I am liking the square ACDelco caps I found online!
Got my Bennett Built aluminum coolant tank setup! Had to buy separate caps but that's fine, I am liking the square ACDelco caps I found online!
0 2019/03/31 20:36:41
0 2019/03/31 19:42:12
0 2019/03/31 19:42:10
0 2019/03/31 19:42:09
0 2019/03/31 19:42:07
0 2019/03/31 19:42:06
Front with 265/40/18 tires and TEIN/KONI suspension - circa early 2019
Front with 265/40/18 tires and TEIN/KONI suspension - circa early 2019
0 2019/03/29 19:59:51
Rear isometric view after new suspension and tires - circa early 2019
Rear isometric view after new suspension and tires - circa early 2019
0 2019/03/29 19:59:50
Rear with 275/40/18 tires and TEIN/KONI suspension - circa early 2019
Rear with 275/40/18 tires and TEIN/KONI suspension - circa early 2019
0 2019/03/29 19:59:49
Front with 265/40/18 tires and TEIN/KONI suspension - circa early 2019
Front with 265/40/18 tires and TEIN/KONI suspension - circa early 2019
0 2019/03/29 19:59:47
After suspension work and new tires - circa early 2019
After suspension work and new tires - circa early 2019
0 2019/03/29 19:59:46
Front KONI Yellows installed with TEIN springs, early 2019
Front KONI Yellows installed with TEIN springs, early 2019
0 2019/03/29 19:59:45
Before any suspension work (circa early 2014), and still with the super-thin tires the previous owner had installed (I'm not a fan of the lifted monster-truck look on sports cars)
Before any suspension work (circa early 2014), and still with the super-thin tires the previous owner had installed (I'm not a fan of the lifted monster-truck look on sports cars)
0 2019/03/29 19:59:44
Using spring-compressors rented from AutoZone to remove the springs from the struts, early 2019
Using spring-compressors rented from AutoZone to remove the springs from the struts, early 2019
0 2019/03/29 19:59:43
Installing the front KONI Yellow struts, early 2019
Installing the front KONI Yellow struts, early 2019
0 2019/03/29 19:59:41
Rear KONI Yellows in rear, with TEIN springs, mid-2015
Rear KONI Yellows in rear, with TEIN springs, mid-2015
0 2019/03/29 19:59:40
Installing the rear KONI Yellow struts, mid-2015
Installing the rear KONI Yellow struts, mid-2015
0 2019/03/29 19:59:39
Stock struts with just the TEIN S.TECH springs, circa mid-late 2014
Stock struts with just the TEIN S.TECH springs, circa mid-late 2014
0 2019/03/29 19:59:38
0 2017/08/07 05:39:31
0 2017/02/26 17:50:19
Engine bay after a quick wipe-down, with newly painted/installed hood struts
Engine bay after a quick wipe-down, with newly painted/installed hood struts
0 2015/08/29 19:51:37
New SOKIETECH hood struts installed after being painted!
New SOKIETECH hood struts installed after being painted!
0 2015/08/29 19:47:20
New JDM LED tails - Night Time
New JDM LED tails - Night Time
0 2015/08/16 13:05:18
New JDM LED tails - Night Time
New JDM LED tails - Night Time
0 2015/08/16 13:05:16
New JDM LED tails - side view, LED-ring turn signal blinkers illuminated
New JDM LED tails - side view, LED-ring turn signal blinkers illuminated
0 2015/08/16 00:11:55
New JDM LED tails - side view, not illuminated
New JDM LED tails - side view, not illuminated
0 2015/08/16 00:11:53
New JDM LED tails - brake lights/reverse lights
New JDM LED tails - brake lights/reverse lights
0 2015/08/16 00:11:49
New JDM LED tails installed! [LED turn indicator rings illuminated]
New JDM LED tails installed! [LED turn indicator rings illuminated]
0 2015/08/16 00:11:47
New JDM LED tails installed!
New JDM LED tails installed!
0 2015/08/16 00:11:42
New Tails vs. Old Tails!
New Tails vs. Old Tails!
0 2015/08/16 00:11:37
New JDM LED tails for 2004-2008 RX8!
New JDM LED tails for 2004-2008 RX8!
0 2015/08/16 00:11:32
Hood gas struts installed!
Hood gas struts installed!
0 2015/08/16 00:11:27
Hood gas struts
Hood gas struts
0 2015/08/12 19:37:09
New bump-stops for rear shocks, cut down to account for lowering by TEIN S.TECH springs and KONI Yellow shocks
New bump-stops for rear shocks, cut down to account for lowering by TEIN S.TECH springs and KONI Yellow shocks
0 2015/08/12 19:32:30
Hood gas struts
Hood gas struts
0 2015/08/12 19:32:27
Tire-well amp cover with plexiglass window!
Tire-well amp cover with plexiglass window!
0 2015/08/12 19:31:20
Tire-well amp cover with plexiglass window!
Tire-well amp cover with plexiglass window!
0 2015/08/12 19:31:17