Replacement Help!!!
#1
Replacement Help!!!
hey guys. my motor overheated and im replacing it with a motor from a 8 that was rearended with 15k miles on it. i was sold just the block, and i was wondering if you guys would be able to tell me what parts i need and what parts i would be able to salvage of the old motor. thanks in advanced.
#2
Modulated Moderator
iTrader: (3)
You should be OK with the old parts off your long block......
Carefully remove the bits/ clean and lube, and transplant to the new block and you should be good to go. You should get new injector o-rings and grommets and might need a few gaskets and seals...depends what kind of shape your old ones are..IE the intake rubber seals
You might want to have the injectors cleaned...and replace the thermostat just to be sure..
Why did it overheat??
Carefully remove the bits/ clean and lube, and transplant to the new block and you should be good to go. You should get new injector o-rings and grommets and might need a few gaskets and seals...depends what kind of shape your old ones are..IE the intake rubber seals
You might want to have the injectors cleaned...and replace the thermostat just to be sure..
Why did it overheat??
#3
You should be OK with the old parts off your long block......
Carefully remove the bits/ clean and lube, and transplant to the new block and you should be good to go. You should get new injector o-rings and grommets and might need a few gaskets and seals...depends what kind of shape your old ones are..IE the intake rubber seals
You might want to have the injectors cleaned...and replace the thermostat just to be sure..
Why did it overheat??
Carefully remove the bits/ clean and lube, and transplant to the new block and you should be good to go. You should get new injector o-rings and grommets and might need a few gaskets and seals...depends what kind of shape your old ones are..IE the intake rubber seals
You might want to have the injectors cleaned...and replace the thermostat just to be sure..
Why did it overheat??
#4
Replacement Help!!!
hey guys. my motor overheated and im replacing it with a motor from a 8 that was rearended with 15k miles on it. i was sold just the block, and i was wondering if you guys would be able to tell me what parts i need and what parts i would be able to salvage of the old motor. thanks in advanced.
Hope it helps!
Thread
Thread Starter
Forum
Replies
Last Post
LMURailsplitter02
New Member Forum
1
09-06-2015 10:56 PM