Rotary Engine Rebuilders
#101
You gonna eat that?
Thread Starter
iTrader: (1)
I added them.
Maybe it's one bad job, maybe it's a pattern.
Hard to believe they'd still be doing rebuilds if they were that incompetent.
#102
Registered
My first time posting a link on my phone but here goes.
These guys built my renesis had some issues but they owed it and fixed it. My experience was positive and I'd go back.
On the east coast of Canada in little Saint John NB we have -Saint John engine builders -
https://saintjohnengine.com/
These guys built my renesis had some issues but they owed it and fixed it. My experience was positive and I'd go back.
On the east coast of Canada in little Saint John NB we have -Saint John engine builders -
https://saintjohnengine.com/
#103
You gonna eat that?
Thread Starter
iTrader: (1)
Thanks.
They're on the list.
They're on the list.
#104
Rebuild Time? I'd Contact Rotary Resurrection
I put off the rebuild as long as I could, until the low compression "hot start" became unbearable (i.e., praying it didn't die at stop lights). Finally broke down and took the car to Rotary Resurrection in Morristown, TN and I couldn't be happier with the result. Kevin basically built a new engine except for the rotors, which were in good shape, and the car runs like new. Not only did he fix my engine problems but he installed a new clutch, fixed my malfunctioning headlight levelers, and repaired a damaged rear suspension, all for around $4000. He also sent photos showing every step of the process so I wasn't kept in the dark wondering what was going on. If you're looking for someone to get your RX8 up and running again, I highly recommend Kevin. If you want more info or have questions about my rebuild feel free to reply to this post and I'll gladly answer them. Or you can contact Kevin at https://www.rotaryresurrection.com/
The following users liked this post:
BigCajun (07-06-2019)
#105
You gonna eat that?
Thread Starter
iTrader: (1)
Thanks for the info.
I'm curious, how long did they take between the time you left it and when it was ready?
I'm curious, how long did they take between the time you left it and when it was ready?
#106
Obsessive Paint Polisher
Thanks BigC, for the effort to initialize and maintain this thread. I'm hoping to revive the spirit in my '04 and this thread gives me two good starting points.
The following users liked this post:
BigCajun (01-11-2020)
#107
You gonna eat that?
Thread Starter
iTrader: (1)
#108
You gonna eat that?
Thread Starter
iTrader: (1)
Added MZM Performance in Georgetown, TX.
MZM International Inc. - Import Performance Parts & Tuning Specialists for Subaru STI, EVO AWD
Thanks to new member Bob St.
https://www.rx8club.com/new-member-f...1/#post4909119
MZM International Inc. - Import Performance Parts & Tuning Specialists for Subaru STI, EVO AWD
Thanks to new member Bob St.
https://www.rx8club.com/new-member-f...1/#post4909119
Last edited by BigCajun; 01-26-2020 at 09:52 AM.
#109
Rotary Ressurections
I can vouch for Rotary Resurrections (http://www.rotaryresurrection.com/2ndgen/contact.html)
Kevin did my rebuild in June and I haven't had a single hiccup out of the engine. Matter of fact, while he had it he fixed a couple of suspension problems for me and replaced a worn clutch. Great guy and his work is immaculate!
Kevin did my rebuild in June and I haven't had a single hiccup out of the engine. Matter of fact, while he had it he fixed a couple of suspension problems for me and replaced a worn clutch. Great guy and his work is immaculate!
#110
You gonna eat that?
Thread Starter
iTrader: (1)
I can vouch for Rotary Resurrections (http://www.rotaryresurrection.com/2ndgen/contact.html)
Kevin did my rebuild in June and I haven't had a single hiccup out of the engine. Matter of fact, while he had it he fixed a couple of suspension problems for me and replaced a worn clutch. Great guy and his work is immaculate!
Kevin did my rebuild in June and I haven't had a single hiccup out of the engine. Matter of fact, while he had it he fixed a couple of suspension problems for me and replaced a worn clutch. Great guy and his work is immaculate!
He does have a solid reputation.
#111
You gonna eat that?
Thread Starter
iTrader: (1)
Just added Addicted Performance in Maryville, TN.
https://www.addictedperformanceunlimited.com/
Thanks to jl1rx7.
https://www.addictedperformanceunlimited.com/
Thanks to jl1rx7.
#112
No respecter of malarkey
iTrader: (25)
I will also add that people should educate themselves on what is important in engine building, and a lot of the attention to detail you see in piston engine builders does cross over to quality rotary builders. There is also a lot of misinformation regarding what makes power, and what doesn't. For example, the proven high HP drummond engines are not ported.
#113
You gonna eat that?
Thread Starter
iTrader: (1)
Added Derwin Performance in Terrebonne, Quebec.
Thanks to Loki.
Derwin Performance Rotary Engine Specialists in Canada
(Terrebonne means 'Good land', our fishing camp was in Terrebonne Parish, LA.
)
Thanks to Loki.
Derwin Performance Rotary Engine Specialists in Canada
(Terrebonne means 'Good land', our fishing camp was in Terrebonne Parish, LA.
)
The following users liked this post:
Loki (06-07-2020)
#114
No respecter of malarkey
iTrader: (25)
People might also want to review the experiences of others regarding some rotary rebuild vendors from RX7Club, as they’ve been around the block quite a few more times than anyone here. Especially since just any old link is being posted here with the vague warning to do your own research first:
https://www.rx7club.com/bad-fugly-businesses-231/
.
https://www.rx7club.com/bad-fugly-businesses-231/
.
#115
No respecter of malarkey
iTrader: (25)
But, one and IMO the best, would be Darryl Drummond. He built the sealed Renesis engines used in the Star Mazda Formula Race Cars and a buddies Renesis from him made 268HP on the engine dyno.
Drummond Engines 541.761.5520
just FYI that Daryl is now mostly retired with the exception of a certain few past customers. IMO he is a legend for Renesis race engine work and knowledge. 50+ years of rotary engine experience and well known in racing circles, his influence and race engine work places him in an upper echelon of a very few, rare individuals.
.
The following users liked this post:
BigCajun (06-07-2020)
#116
You gonna eat that?
Thread Starter
iTrader: (1)
just FYI that Daryl is now mostly retired with the exception of a certain few past customers. IMO he is a legend for Renesis race engine work and knowledge. 50+ years of rotary engine experience and well known in racing circles, his influence and race engine work places him in an upper echelon of a very few, rare individuals.
.
.
#117
You gonna eat that?
Thread Starter
iTrader: (1)
Pineapple Racing Rebuild Info
Member Petscar provided some good info on Pineapple Racing rebuilds.
https://www.rx8club.com/rx-8-discuss...0/#post4921922
https://www.rx8club.com/rx-8-discuss...0/#post4921922
#118
Registered
Spoke with Jesse in Topeka, Kansas. He replied that he has retired from rebuilding rotary engines and suggested Haag performance in California, Sacremento, Haag performance
#119
You gonna eat that?
Thread Starter
iTrader: (1)
The following users liked this post:
RX-8 40th Anniversary (02-09-2021)
#120
You gonna eat that?
Thread Starter
iTrader: (1)
The following users liked this post:
RX-8 40th Anniversary (02-09-2021)
#121
Many of us need rebuilds, and I've spent a good bit of time searching.
I can't seem to find a thread with a substantial number of reputable rebuilders, so I thought I would post the ones I've seen referenced on our forum.
Locations and reviews may help new members, and save time for the rest of us.
Feel free to add or update as needed.
In alphabetical order:
Maryville, TN.
https://www.addictedperformanceunlimited.com/
Indiana
Banzai Racing Home Page
Phoenix, AZ.
https://black-halo-racing.myshopify.com/
*Member fireishot34 reports BHR no longer does rebuilds.
S.E. Michigan
https://chipsmotorsports.com/
Moraine, Ohio
https://www.colletti-motorsports.org/
Columbus, OH.
DEFINED AUTOWORKS | Service Repair Upgrades | Performance for Mazda RX7 | RX-7 | RX8
Terrebonne, Quebec, Canada
Derwin Performance Rotary Engine Specialists in Canada
Rogue River, Ore.*
Drummond Engines 541.761.5520
* Member TeamRX8 reports the owner is mostly retired now and is doing selected rebuilds, I'll leave it up for the time being.
Laurel, Indiana
http://www.eccentricmotorsports.net/
(A member recommends this shop, no mention of rebuilds on the website.)
*This link is no longer viable, 3/30/19
TomD_Cincy reports they are still on Facebook.
Washington, N.C.
(Northeast N.C.)
Michael Edwards
https://m.facebook.com/profile.php?i...ect-to%2F&_rdr
(He's on Facebook, I'm not)
Schaumburg, IL.
https://www.eliterotaryshop.com/
Some discussion on their competence.
See post #100
Sacramento, CA.
https://www.haagperformance.com/
New Jersey
Services IRPerformance
Los Angeles area
http://jandgautomotive.net/
Topeka, KS.*
Welcome to Jesse Prather Motorsports
*Website says they build racing engines, a member recommends them.
**40th Anniversary RX8 reports Jesse has retired. He recommends Haag Performance in Sacramento, Cali.
Blachttp://www.derwinperformance.com/kwood, N.J.
http://www.jprimports.com/
Los Angeles
https://lucky7racing.net/
Signal Hill, CA.**
https://mazdatrix.com/index8.htm
A member reports Mazdatrix no longer does rebuilds.
Cresson, TX.
http://goteammer.com/
(Apparently, this shop builds racing engines, not ordinary rotary rebuilds, I'll leave it in case someone wants to build a RACE CAR.)
Update: 7/31/18
A member reports MER doesn't do actual rebuilds.
https://goteammer.com/services/rotary-service/
Georgetown, TX
http://www.mzmperformance.com/
Huntington Beach, CA
NepTune SPEED - Home
Edinburg, Tx.
OJ Imports
Palm Beach, Fla.
Pettit Racing
RX-7 & RX-8 Performance
Portland, Ore.
Pineapple Racing
Anaheim, CA.**
http://www.racingbeat.com/mazda/performance/about.html
** Racing Beat does not rebuild engines, but is a source for those who decide to DIY.
Neosho, MO.
(Southwest MO.)
</title> <link rel="apple-touch-icon" type="image/x-icon" href="http://www.therotarydoctor.net/mb/favicon.ico"/> <link rel="stylesheet" type="text/css" href="/mb/_dm/s/rt/dist/css/nee-css-font-package.min.css?version=2020-11-29T08_15_50" /> <link rel
Calgary, AB, Canada
https://www.rotaryengine.com/
Garland, Tx.
https://rotaryperformance.com/
Westminster, Maryland
https://www.rotorpistonmotorsports.com/
Knoxville, Tn.
Rotary Resurrection home of the budget rebuild.
Kannapolis, NC
(Charlotte)
RotorSports Racing Mazda RX-7 rotary engines and performance modifications shop
A member mentioned them in a thread and has contacted them, no results yet.
St. John, N.B. Canada
https://saintjohnengine.com/
Miami, Fla.
Turbo Clinic ROTARY
I can't seem to find a thread with a substantial number of reputable rebuilders, so I thought I would post the ones I've seen referenced on our forum.
Locations and reviews may help new members, and save time for the rest of us.
Feel free to add or update as needed.
In alphabetical order:
Maryville, TN.
https://www.addictedperformanceunlimited.com/
Indiana
Banzai Racing Home Page
Phoenix, AZ.
https://black-halo-racing.myshopify.com/
*Member fireishot34 reports BHR no longer does rebuilds.
S.E. Michigan
https://chipsmotorsports.com/
Moraine, Ohio
https://www.colletti-motorsports.org/
Columbus, OH.
DEFINED AUTOWORKS | Service Repair Upgrades | Performance for Mazda RX7 | RX-7 | RX8
Terrebonne, Quebec, Canada
Derwin Performance Rotary Engine Specialists in Canada
Rogue River, Ore.*
Drummond Engines 541.761.5520
* Member TeamRX8 reports the owner is mostly retired now and is doing selected rebuilds, I'll leave it up for the time being.
Laurel, Indiana
http://www.eccentricmotorsports.net/
(A member recommends this shop, no mention of rebuilds on the website.)
*This link is no longer viable, 3/30/19
TomD_Cincy reports they are still on Facebook.
Washington, N.C.
(Northeast N.C.)
Michael Edwards
https://m.facebook.com/profile.php?i...ect-to%2F&_rdr
(He's on Facebook, I'm not)
Schaumburg, IL.
https://www.eliterotaryshop.com/
Some discussion on their competence.
See post #100
Sacramento, CA.
https://www.haagperformance.com/
New Jersey
Services IRPerformance
Los Angeles area
http://jandgautomotive.net/
Topeka, KS.*
Welcome to Jesse Prather Motorsports
*Website says they build racing engines, a member recommends them.
**40th Anniversary RX8 reports Jesse has retired. He recommends Haag Performance in Sacramento, Cali.
Blachttp://www.derwinperformance.com/kwood, N.J.
http://www.jprimports.com/
Los Angeles
https://lucky7racing.net/
Signal Hill, CA.**
https://mazdatrix.com/index8.htm
A member reports Mazdatrix no longer does rebuilds.
Cresson, TX.
http://goteammer.com/
(Apparently, this shop builds racing engines, not ordinary rotary rebuilds, I'll leave it in case someone wants to build a RACE CAR.)
Update: 7/31/18
A member reports MER doesn't do actual rebuilds.
https://goteammer.com/services/rotary-service/
Georgetown, TX
http://www.mzmperformance.com/
Huntington Beach, CA
NepTune SPEED - Home
Edinburg, Tx.
OJ Imports
Palm Beach, Fla.
Pettit Racing
RX-7 & RX-8 Performance
Portland, Ore.
Pineapple Racing
Anaheim, CA.**
http://www.racingbeat.com/mazda/performance/about.html
** Racing Beat does not rebuild engines, but is a source for those who decide to DIY.
Neosho, MO.
(Southwest MO.)
</title> <link rel="apple-touch-icon" type="image/x-icon" href="http://www.therotarydoctor.net/mb/favicon.ico"/> <link rel="stylesheet" type="text/css" href="/mb/_dm/s/rt/dist/css/nee-css-font-package.min.css?version=2020-11-29T08_15_50" /> <link rel
Calgary, AB, Canada
https://www.rotaryengine.com/
Garland, Tx.
https://rotaryperformance.com/
Westminster, Maryland
https://www.rotorpistonmotorsports.com/
Knoxville, Tn.
Rotary Resurrection home of the budget rebuild.
Kannapolis, NC
(Charlotte)
RotorSports Racing Mazda RX-7 rotary engines and performance modifications shop
A member mentioned them in a thread and has contacted them, no results yet.
St. John, N.B. Canada
https://saintjohnengine.com/
Miami, Fla.
Turbo Clinic ROTARY
12400 SW 128th St, Miami, FL 33186(786) 897-8324https://g.co/kgs/EiU5tG
(I could not find a viable link, they're on Facebook, I'm not)
(I could not find a viable link, they're on Facebook, I'm not)
#122
You gonna eat that?
Thread Starter
iTrader: (1)
Hello sorry to post here im new and cant start a new thread. hope you can help me im getting fed up with my 8. i recently bought an 05 mt 6 port. car was misfiring badly and rpm was going up and down. misfiring was fixed ive put new spark plugs and coils. change oil etc. till now only problem im getting is its ideling badly. after some inspection ive found that the engine was changed. the car originally came wit a 4 port engine qnd they changed it to 6 port but is still using a 4 port ecu. so what can be made to change this apart from changing the ecu because they are expensive here.
#123
No... please read what i actually wrote.
To summarize here too...
Bro, I said Mazda Motorsports does that... not Tasca.
Mazda Motorsports can sell NEW engines... or rebuilt engines but they can't give you the core charge back for the rebuilt engines.
Tasca can only sell rebuilt engines and they will give you the core charge back.
To summarize here too...
Bro, I said Mazda Motorsports does that... not Tasca.
Mazda Motorsports can sell NEW engines... or rebuilt engines but they can't give you the core charge back for the rebuilt engines.
Tasca can only sell rebuilt engines and they will give you the core charge back.
#124
You gonna eat that?
Thread Starter
iTrader: (1)
No... please read what i actually wrote.
To summarize here too...
Bro, I said Mazda Motorsports does that... not Tasca.
Mazda Motorsports can sell NEW engines... or rebuilt engines but they can't give you the core charge back for the rebuilt engines.
Tasca can only sell rebuilt engines and they will give you the core charge back.
To summarize here too...
Bro, I said Mazda Motorsports does that... not Tasca.
Mazda Motorsports can sell NEW engines... or rebuilt engines but they can't give you the core charge back for the rebuilt engines.
Tasca can only sell rebuilt engines and they will give you the core charge back.
Sometimes the little hamster falls asleep in the wheel.
Deleting erroneus post.