Rotary Engine Rebuilders
#179
You gonna eat that?
Thread Starter
iTrader: (1)
#180
You gonna eat that?
Thread Starter
iTrader: (1)
The Rotary Doctor, Kyle in Neosho, Mo. finished dropping my new engine in and doing all the needed repairs on my LY.
Outstanding job, far exceeded my expectations .
I would recommend him.
Outstanding job, far exceeded my expectations .
I would recommend him.
#182
You gonna eat that?
Thread Starter
iTrader: (1)
I paid $6k for a new factory engine.
One of, if not the last available.
Idk if there will be anymore.
Afaik, Mazda is still making them.
Maybe they're selling them to the Asian market as fast as they can build them.
One of, if not the last available.
Idk if there will be anymore.
Afaik, Mazda is still making them.
Maybe they're selling them to the Asian market as fast as they can build them.
#183
I paid 40k to RPM for rebuild still not working properly
#184
You gonna eat that?
Thread Starter
iTrader: (1)
I spent a lot of time talking to Kyle at Rotary Doctor.
He said he fixes a lot of half fast rebuilds.
When I dropped off my engine there he showed me a rebuild he did for a guy in Louisiana who recently came and drove it back to La.
He has a very good rep with guys who know about him.
He doesn't advertise, he doesn't have a big modern shop, he's just a guy who loves working on Wankels and takes pride in it.
If you're fed up with your experience, give him a call.
He said he fixes a lot of half fast rebuilds.
When I dropped off my engine there he showed me a rebuild he did for a guy in Louisiana who recently came and drove it back to La.
He has a very good rep with guys who know about him.
He doesn't advertise, he doesn't have a big modern shop, he's just a guy who loves working on Wankels and takes pride in it.
If you're fed up with your experience, give him a call.
#185
You gonna eat that?
Thread Starter
iTrader: (1)
Another bad experience from member _JB_ about Pettit botching a rebuild.
They are definitely slipping.
https://www.rx8club.com/rx-8-discuss...0/#post4977204
They are definitely slipping.
https://www.rx8club.com/rx-8-discuss...0/#post4977204
Last edited by BigCajun; 12-30-2022 at 11:20 AM.
#186
You gonna eat that?
Thread Starter
iTrader: (1)
Noted _JB_'s post in the header.
#187
No respecter of malarkey
iTrader: (25)
I checked the other day and at least one was in US inventory, but the price is hard to believe. My Mazda Motorsports cost is up $2000 from several years ago (over 50%). The discounted retail price must be close to $6500 now. Probably over $7k at a dealership. Just for the keg.
Yikes.
![SHOCKED](https://www.rx8club.com/images/smilies/SHOCKED.gif)
.
Last edited by TeamRX8; 02-27-2023 at 11:23 AM.
#188
You gonna eat that?
Thread Starter
iTrader: (1)
I checked the other day and at least one was in US inventory, but the price is hard to believe. My Mazda Motorsports cost is up $2000 from several years ago (over 50%). The discounted retail price must be close to $6500 now. Probably over $7k at a dealership. Just for the keg.
Yikes.![SHOCKED](https://www.rx8club.com/images/smilies/SHOCKED.gif)
.
Yikes.
![SHOCKED](https://www.rx8club.com/images/smilies/SHOCKED.gif)
.
#190
Registered
Anyone know if Rotary Doctor still in biz? I tried contacting him via email but didn't get a response. I am in the Southeast Missouri area. unless there is a rotary engine specialist closer.
#191
You gonna eat that?
Thread Starter
iTrader: (1)
#193
Registered
#194
You gonna eat that?
Thread Starter
iTrader: (1)
#195
Registered
unfortunately I work 8am - 5pm, don't want to brother the guy after hours. I send him another email detailing what my problem is and what he suggest for a reman or rebuild. plus a possible street port.
#196
Registered
I just took a look at the pineappleracing.com site. Just curious about the price of rebuilt engines.
It was noted that the engine pictured was for m/t (manual transmission) only. Can anyone explain
the difference between a/t and m/t engines ?? How do they differ??? Why would they make that distinction??
It was noted that the engine pictured was for m/t (manual transmission) only. Can anyone explain
the difference between a/t and m/t engines ?? How do they differ??? Why would they make that distinction??
#197
You gonna eat that?
Thread Starter
iTrader: (1)
I just took a look at the pineappleracing.com site. Just curious about the price of rebuilt engines.
It was noted that the engine pictured was for m/t (manual transmission) only. Can anyone explain
the difference between a/t and m/t engines ?? How do they differ??? Why would they make that distinction??
It was noted that the engine pictured was for m/t (manual transmission) only. Can anyone explain
the difference between a/t and m/t engines ?? How do they differ??? Why would they make that distinction??
ATs are less desirable, and worth less than MTs.
If you need an AT rebuild, you should consider a MT instead.
Unless you really love a certain AT model, you'll likely spend more for a rebuild/reman or new engine than the car is worth.
https://www.rx8club.com/series-i-tec...manual-164494/
#198
Registered
.
BigCajun :
I know that the A/T setup has less power then the M/T. I know the M/T engine makes too much power
for the Auto Transmission to handle in the long run. My question has to do with the actual differences in the two engines.
What I was looking for was, which parts in the two engine types are different. I have no need for a new/rebuilt engine.
There has to be some part(s) that are different in the two types.
It's OK to say "I don't know". I hope this clarifies my question.... Anyone??
.
BigCajun :
I know that the A/T setup has less power then the M/T. I know the M/T engine makes too much power
for the Auto Transmission to handle in the long run. My question has to do with the actual differences in the two engines.
What I was looking for was, which parts in the two engine types are different. I have no need for a new/rebuilt engine.
There has to be some part(s) that are different in the two types.
It's OK to say "I don't know". I hope this clarifies my question.... Anyone??
.
#199
No respecter of malarkey
iTrader: (25)
Been talking to the owner some recently and am realizing he’s a good guy who’s been in the rotary game since the late 70’s. So he might not be around forever, but I’m comfortable to give a “recommended” bump
His name is JP Derdeyn. If you’re in the Montreal CAN area give JP a shout.
His name is JP Derdeyn. If you’re in the Montreal CAN area give JP a shout.
Added Derwin Performance in Terrebonne, Quebec.
Thanks to Loki.
Derwin Performance Rotary Engine Specialists in Canada
(Terrebonne means 'Good land', our fishing camp was in Terrebonne Parish, LA.
)
Thanks to Loki.
Derwin Performance Rotary Engine Specialists in Canada
(Terrebonne means 'Good land', our fishing camp was in Terrebonne Parish, LA.
![Smilie](https://www.rx8club.com/images/smilies/smile.gif)
The following users liked this post:
Jedi54 (12-24-2023)