GB: One Touch Close Sunroof Module
#201
My 8 looks like a Smurf
iTrader: (4)
Join Date: Sep 2007
Location: Ottawa, ON, Canada
Posts: 1,742
Likes: 0
Received 0 Likes
on
0 Posts
Got mine in and everything works! I love this mod.
One minor issue though: If you manually stop your sunroof in a position that is not fully opened or closed (ex half way) the buttons stop responding for about 30 seconds. Is this normal?
The reason I noticed this is that I something like my sunroof in the "big tilt" position (tilted farther open than the regular tilt by hitting slide then stopping it once its all the way up but hasn't started to move back though.
I can live with it but I just wanted to make sure it's an expected side effect.
edit: Close button seems to sometimes not work when the sunroof is open? If I re-hit open then close it works though. Most of the time it works fine but randomly it won't do anything.
Worth noting is that I had to pull off the wire tap and put it back on as it missed the orange wire the first time :-/ Since that means an extra gash in the red wire because of it, would that make the connection less stable?
One minor issue though: If you manually stop your sunroof in a position that is not fully opened or closed (ex half way) the buttons stop responding for about 30 seconds. Is this normal?
The reason I noticed this is that I something like my sunroof in the "big tilt" position (tilted farther open than the regular tilt by hitting slide then stopping it once its all the way up but hasn't started to move back though.
I can live with it but I just wanted to make sure it's an expected side effect.
edit: Close button seems to sometimes not work when the sunroof is open? If I re-hit open then close it works though. Most of the time it works fine but randomly it won't do anything.
Worth noting is that I had to pull off the wire tap and put it back on as it missed the orange wire the first time :-/ Since that means an extra gash in the red wire because of it, would that make the connection less stable?
Last edited by TheWulf; 04-18-2008 at 11:21 PM.
#202
503wtq Boosted Bimmer
Thread Starter
iTrader: (2)
Join Date: Oct 2004
Location: Los Angeles, California
Posts: 3,038
Likes: 0
Received 0 Likes
on
0 Posts
Was the engine running while you had this problem?
#203
resist, un-learn, defy...
Join Date: Oct 2007
Location: ewa beach, hawaii
Posts: 243
Likes: 0
Received 0 Likes
on
0 Posts
got my replacement and installed. works like a charm now. issues mentioned by TheWulf i think are normal as rodger has explained, the delay that is.
thanks RR!
thanks RR!
#208
My 8 looks like a Smurf
iTrader: (4)
Join Date: Sep 2007
Location: Ottawa, ON, Canada
Posts: 1,742
Likes: 0
Received 0 Likes
on
0 Posts
Ok so yesterday I was going to try out that 4 second thing and something else decided to happen :-/
Opened the sunroof, drove like 10 mins, hit the close and it didn't auto-close (just the normal few inches). Hit it again, same thing. Hit it a third time and none of the controls worked anymore :-/
Happens I blew the 7.5A fuse that this is hooked up to. I took the mod out for now to make sure it didn't blow again, and I wanted to check with you as to possible cause. Should I put it back in? Should I upgrade that fuse?
Sidenote: anyone else find it odd that the same fuse is used for sunroof controls, seatwarmers and HVAC but the maplights are on a diff fuse?
Opened the sunroof, drove like 10 mins, hit the close and it didn't auto-close (just the normal few inches). Hit it again, same thing. Hit it a third time and none of the controls worked anymore :-/
Happens I blew the 7.5A fuse that this is hooked up to. I took the mod out for now to make sure it didn't blow again, and I wanted to check with you as to possible cause. Should I put it back in? Should I upgrade that fuse?
Sidenote: anyone else find it odd that the same fuse is used for sunroof controls, seatwarmers and HVAC but the maplights are on a diff fuse?
#209
503wtq Boosted Bimmer
Thread Starter
iTrader: (2)
Join Date: Oct 2004
Location: Los Angeles, California
Posts: 3,038
Likes: 0
Received 0 Likes
on
0 Posts
Ok so yesterday I was going to try out that 4 second thing and something else decided to happen :-/
Opened the sunroof, drove like 10 mins, hit the close and it didn't auto-close (just the normal few inches). Hit it again, same thing. Hit it a third time and none of the controls worked anymore :-/
Happens I blew the 7.5A fuse that this is hooked up to. I took the mod out for now to make sure it didn't blow again, and I wanted to check with you as to possible cause. Should I put it back in? Should I upgrade that fuse?
Sidenote: anyone else find it odd that the same fuse is used for sunroof controls, seatwarmers and HVAC but the maplights are on a diff fuse?
Opened the sunroof, drove like 10 mins, hit the close and it didn't auto-close (just the normal few inches). Hit it again, same thing. Hit it a third time and none of the controls worked anymore :-/
Happens I blew the 7.5A fuse that this is hooked up to. I took the mod out for now to make sure it didn't blow again, and I wanted to check with you as to possible cause. Should I put it back in? Should I upgrade that fuse?
Sidenote: anyone else find it odd that the same fuse is used for sunroof controls, seatwarmers and HVAC but the maplights are on a diff fuse?
#212
Administrator
iTrader: (7)
had this thing in for like a week but only driven my car twice this month. I almost forgot it was in there till I went to close the sunroof this morning.
LOVE this thing! So much in fact that I thought it needed its own thread for those of us who have already installed it. https://www.rx8club.com/series-i-interior-audio-electronics-24/rotaryrasps-sunroof-switch-mod-installed-143974/
LOVE this thing! So much in fact that I thought it needed its own thread for those of us who have already installed it. https://www.rx8club.com/series-i-interior-audio-electronics-24/rotaryrasps-sunroof-switch-mod-installed-143974/
#215
ProfDean
Join Date: May 2006
Location: Horseheads, NY
Posts: 47
Likes: 0
Received 0 Likes
on
0 Posts
Too late??
I hope that I am not too late to buy one of these modules. Looks like an easy DIY and the convenience is worth the price. I have signed the waiver and am ready to email it to you with my Paypal payment if you are still open for business.
#217
Administrator
iTrader: (7)
i think the GB is still ongoing. hopefully Rasp will chime in soon.
#224
Administrator
iTrader: (7)
OMG, the group buy is ending already?! You guys better jump on this quick!