GROUP BUY - RP SuperCat MidPipe & Gasket Kit - www.rx7.com
#28
Need Rotary Engine!!!
Join Date: Mar 2006
Location: Garden Grove, CA
Posts: 189
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by c41250n
im interested, is it capable with the greddy sp2 exhaust?
#29
It's good to be the king.
Join Date: Jan 2006
Location: Corinth, TX
Posts: 1,406
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by CoupeM
Can RP weld a reasonator in as well? i dont mind paying extra for it. Just dont want it to be too loud.
#34
It's good to be the king.
Join Date: Jan 2006
Location: Corinth, TX
Posts: 1,406
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by DOMINION
1.) Will this work or boult up with my HSK exhaust?
Originally Posted by imrtommy
btw quick question, i hear this fits on to the borla nicely with no problems right? or was that another exhaust i was reading about?
I called RP and they said that as long as the aftermarket exhaust bolts up fine to the OEM cat pipe, then there should be no issues at all, as the fitments are designed to be the same as the OEM pipe.
#36
Honor & Integrity
Thread Starter
Join Date: May 2005
Location: Virginia Beach, VA
Posts: 566
Likes: 0
Received 0 Likes
on
0 Posts
imrtommy:
What I meant about “CAD” speaking with the HKS question is that most all manufactures exhaust come with the mid-pipe and it is design to marry up to the OEM TWC/Three-Way Catalyst or “Cat-Pipe”. So in the broadest terms… it stands to reason that the answer is yes. By nature if your exhaust mated up with the OEM TWC than you should have no issues with RP’s Sup-Cat. Chris did mention some people noted a clearance issue, but he said he would provide a visual fix incase anyone ran into it for some reason.
Also see the attached image for a diagram of the OEM exhaust system from the Exhaust Manifold back
\\Konig\\:
I know they do accept PayPal so I do not think it will be an issue, but that is one of the questions I am waiting on. I do think they will accept it as a method of payment though.
CoupeM:
I understand that they do Custom Fabrication in shop so I would guess for a few extra bucks the answer is probably yes. I would think this goes for the Clamp/Hanger too. Chris noted that it was not guaranteed to be on the GB Sup-Cats but if you must have one I am sure you can request to pay and have it included. Also, most all muffler shops around the world can do this for you after the fact for near nothing in cost too.
Rhythmic:
Please do not hold me to this, but if I recall it is claimed to be about an 8-12 HP gain. Not a whole helluva lot, but most honest manufacturers will tell you that Mazda Engineering on this motor and car had already damn near squeezed every last drop of performance they could without going Turbo or Supercharged.
Creto:
Thanks again for doing your leg work with RP… I hope they are not getting annoyed with you asking them for answers to these questions. I am guessing they are not. If you call them again… maybe you will want to let them know the count already… 15 in 24hrs is not bad at all.
What I meant about “CAD” speaking with the HKS question is that most all manufactures exhaust come with the mid-pipe and it is design to marry up to the OEM TWC/Three-Way Catalyst or “Cat-Pipe”. So in the broadest terms… it stands to reason that the answer is yes. By nature if your exhaust mated up with the OEM TWC than you should have no issues with RP’s Sup-Cat. Chris did mention some people noted a clearance issue, but he said he would provide a visual fix incase anyone ran into it for some reason.
Also see the attached image for a diagram of the OEM exhaust system from the Exhaust Manifold back
\\Konig\\:
I know they do accept PayPal so I do not think it will be an issue, but that is one of the questions I am waiting on. I do think they will accept it as a method of payment though.
CoupeM:
I understand that they do Custom Fabrication in shop so I would guess for a few extra bucks the answer is probably yes. I would think this goes for the Clamp/Hanger too. Chris noted that it was not guaranteed to be on the GB Sup-Cats but if you must have one I am sure you can request to pay and have it included. Also, most all muffler shops around the world can do this for you after the fact for near nothing in cost too.
Rhythmic:
Please do not hold me to this, but if I recall it is claimed to be about an 8-12 HP gain. Not a whole helluva lot, but most honest manufacturers will tell you that Mazda Engineering on this motor and car had already damn near squeezed every last drop of performance they could without going Turbo or Supercharged.
Creto:
Thanks again for doing your leg work with RP… I hope they are not getting annoyed with you asking them for answers to these questions. I am guessing they are not. If you call them again… maybe you will want to let them know the count already… 15 in 24hrs is not bad at all.
Last edited by vIce^gRip; 07-25-2006 at 10:35 AM.
#37
It's Super Green...
Join Date: Feb 2004
Location: San Diego
Posts: 105
Likes: 0
Received 0 Likes
on
0 Posts
Im in as well...
Begin Committed List:
1. Red_X8
2. 04Renesis
3. Creto
4. Waz
5. rx8dude907
6. Rx8Honey
7. Agent008
8. Easy_E1
9. imrtommy
10. \\Konig\\
11. CoupeM
12. c41250n
13. RX-Hawk
14. traveler027
15. rotorpr
16. Spr Grn8
17.
18.
19.
20.
21.
Begin Committed List:
1. Red_X8
2. 04Renesis
3. Creto
4. Waz
5. rx8dude907
6. Rx8Honey
7. Agent008
8. Easy_E1
9. imrtommy
10. \\Konig\\
11. CoupeM
12. c41250n
13. RX-Hawk
14. traveler027
15. rotorpr
16. Spr Grn8
17.
18.
19.
20.
21.
#40
Honor & Integrity
Thread Starter
Join Date: May 2005
Location: Virginia Beach, VA
Posts: 566
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by SlayerRX8
Oh no! The list is filling up!
How long are you going to be letting people put their names on the list?
I'll know by tomorrow if I'm in or not.
How long are you going to be letting people put their names on the list?
I'll know by tomorrow if I'm in or not.
I am waiting for a reply on how many units or when the Buy will end. I am fairly sure the will let up to 50 units go.
Rhythmic:
I will have to ask and get back to you on that. I do not know.
#41
I'm Kind of a Big Deal
Join Date: Aug 2003
Location: Columbus, Ohio
Posts: 918
Likes: 0
Received 0 Likes
on
0 Posts
Question.
Should this GB wait until they get everything on it that the masses want and that RP has the intention of doing in the future anyways?
We'll save $45 but it won't have the hanger that everyone says is necessary or the revised clamp "that isn't at the top of their list". I thought I read some where that it cost someone $65-70 to have a hanger removed from the oem cat and then welded onto the new cat. Am I mistaken with that comment? That would neglect any savings, correct?
I was on the original list that was interested and still am but I'm just wondering if this is just getting rushed for the sake of rushing it. When it might be better to wait until this piece has everything that it plans on having in the future.
Is this valid or am I missing something?
Should this GB wait until they get everything on it that the masses want and that RP has the intention of doing in the future anyways?
We'll save $45 but it won't have the hanger that everyone says is necessary or the revised clamp "that isn't at the top of their list". I thought I read some where that it cost someone $65-70 to have a hanger removed from the oem cat and then welded onto the new cat. Am I mistaken with that comment? That would neglect any savings, correct?
I was on the original list that was interested and still am but I'm just wondering if this is just getting rushed for the sake of rushing it. When it might be better to wait until this piece has everything that it plans on having in the future.
Is this valid or am I missing something?
#42
I'm in if this is the newer revised higher flowing RP super cat???
Id want mine with a hanger, but if this is the newer higher flowing RP super cat im IN :o)
when do we know when we have to pay and stuff? thanks :o)
Id want mine with a hanger, but if this is the newer higher flowing RP super cat im IN :o)
when do we know when we have to pay and stuff? thanks :o)
#43
It's good to be the king.
Join Date: Jan 2006
Location: Corinth, TX
Posts: 1,406
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by success07
Question.
Should this GB wait until they get everything on it that the masses want and that RP has the intention of doing in the future anyways?
We'll save $45 but it won't have the hanger that everyone says is necessary or the revised clamp "that isn't at the top of their list". I thought I read some where that it cost someone $65-70 to have a hanger removed from the oem cat and then welded onto the new cat. Am I mistaken with that comment? That would neglect any savings, correct?
I was on the original list that was interested and still am but I'm just wondering if this is just getting rushed for the sake of rushing it. When it might be better to wait until this piece has everything that it plans on having in the future.
Is this valid or am I missing something?
Should this GB wait until they get everything on it that the masses want and that RP has the intention of doing in the future anyways?
We'll save $45 but it won't have the hanger that everyone says is necessary or the revised clamp "that isn't at the top of their list". I thought I read some where that it cost someone $65-70 to have a hanger removed from the oem cat and then welded onto the new cat. Am I mistaken with that comment? That would neglect any savings, correct?
I was on the original list that was interested and still am but I'm just wondering if this is just getting rushed for the sake of rushing it. When it might be better to wait until this piece has everything that it plans on having in the future.
Is this valid or am I missing something?
#44
Honor & Integrity
Thread Starter
Join Date: May 2005
Location: Virginia Beach, VA
Posts: 566
Likes: 0
Received 0 Likes
on
0 Posts
Here are some Answers to past questions...
1.) Does this cat have a heat shield?
Yes it does have a heat shield on top. The picture on the website is not current. I have seen quite a few pictures of it on the forum. If a good, clear and current picture is needed, it can be provided.
2.) Is this the New Higher-flowing more opened mesh version you all were working on?
This is the newer, freer flowing unit (not that the old one was an issue). The active metals content is even higher than before (platinum, palladium and rhodium)
3.) Can buyers opt to have the Hanger or resonators added to their cat prior to shipping?
a.) Do you have a flat rate for Hanger Service?
As of now, we do not have a shippable hanger solution. We will, but not right now. It is a bolt on hanger and can be added in the future. The subframe realignment has been effective in avoiding pipe to brace interference.
b.) Do you have a flat rate for Resonator Service?
We do have a stainless resonator that can be added, if desired. It is the same unit we use on the midpipe. This adds $80 to the total and is not a normally stocked item, but would not be an issue to produce.
4.) What are your rough claims of HP gains with this current Cat?
HP has been tested many times. We've seen as much as 15HP improvement and as little as 9HP. About 12HP is what we tell everyone is realistic.
5.) Will you all accept PayPal payments too?
Yes we do accept paypal. The address we use is paypal@rx7.com
1.) Does this cat have a heat shield?
Yes it does have a heat shield on top. The picture on the website is not current. I have seen quite a few pictures of it on the forum. If a good, clear and current picture is needed, it can be provided.
2.) Is this the New Higher-flowing more opened mesh version you all were working on?
This is the newer, freer flowing unit (not that the old one was an issue). The active metals content is even higher than before (platinum, palladium and rhodium)
3.) Can buyers opt to have the Hanger or resonators added to their cat prior to shipping?
a.) Do you have a flat rate for Hanger Service?
As of now, we do not have a shippable hanger solution. We will, but not right now. It is a bolt on hanger and can be added in the future. The subframe realignment has been effective in avoiding pipe to brace interference.
b.) Do you have a flat rate for Resonator Service?
We do have a stainless resonator that can be added, if desired. It is the same unit we use on the midpipe. This adds $80 to the total and is not a normally stocked item, but would not be an issue to produce.
4.) What are your rough claims of HP gains with this current Cat?
HP has been tested many times. We've seen as much as 15HP improvement and as little as 9HP. About 12HP is what we tell everyone is realistic.
5.) Will you all accept PayPal payments too?
Yes we do accept paypal. The address we use is paypal@rx7.com
#46
Honor & Integrity
Thread Starter
Join Date: May 2005
Location: Virginia Beach, VA
Posts: 566
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by rx8dude907
just wondering would it be best i take this to a muffler shop for install or should i try doing it on m own?
#47
Registered
iTrader: (2)
Originally Posted by vIce^gRip
If you have jack stands, a Jack, some basic tools, a friend & some *****... You can do it your self. Friend and ***** are not even required just makes it more interesting!!!
Unless you have some welding gloves,,,
The exhaust will be HOT, DAMN, HOT !
#50
Honor & Integrity
Thread Starter
Join Date: May 2005
Location: Virginia Beach, VA
Posts: 566
Likes: 0
Received 0 Likes
on
0 Posts
UPDATED: 07/26/2006 - 00:04 EST
Begin Committed List:
1. Red_X8
2. 04Renesis
3. Creto
4. Waz
5. rx8dude907
6. Rx8Honey
7. Agent008
8. Easy_E1
9. imrtommy
10. \\Konig\\
11. CoupeM
12. c41250n
13. RX-Hawk
14. traveler027
15. rotorpr
16. Spr Grn8
17. Mikelikes2drive
18. SlayerRX8
19.
20.
21.
22.
23.
24.
25.
26.
27.
28.
29.
30.
Info Thread:
https://www.rx8club.com/showthread.p...64#post1455264
Begin Committed List:
1. Red_X8
2. 04Renesis
3. Creto
4. Waz
5. rx8dude907
6. Rx8Honey
7. Agent008
8. Easy_E1
9. imrtommy
10. \\Konig\\
11. CoupeM
12. c41250n
13. RX-Hawk
14. traveler027
15. rotorpr
16. Spr Grn8
17. Mikelikes2drive
18. SlayerRX8
19.
20.
21.
22.
23.
24.
25.
26.
27.
28.
29.
30.
Info Thread:
https://www.rx8club.com/showthread.p...64#post1455264