DFW: Mazda meet in Haltom City on Saturday, February 19! (fender roller available)
#1
Registered
Thread Starter
iTrader: (1)
Join Date: Oct 2004
Location: Euless, TX
Posts: 152
Likes: 0
Received 0 Likes
on
0 Posts
DFW: Mazda meet in Haltom City on Saturday, February 19! (fender roller available)
Hey everyone!
I just wanted to let you all know that Revolution Performance Manufacturing will be hosting a Mazda meet again on Saturday, February 19 in Haltom City to hang out and work on a few cars.
We recommend that you try to show up around 10am to noon. If you need to change your oil or do any other mods, bring them out. We'd be happy to help. We will also have a fender roller available to use if anyone needs to roll their fenders.
If you're interested, please send me a PM or contact me on AIM for directions and my phone number.
Hope to see you there!
I just wanted to let you all know that Revolution Performance Manufacturing will be hosting a Mazda meet again on Saturday, February 19 in Haltom City to hang out and work on a few cars.
We recommend that you try to show up around 10am to noon. If you need to change your oil or do any other mods, bring them out. We'd be happy to help. We will also have a fender roller available to use if anyone needs to roll their fenders.
If you're interested, please send me a PM or contact me on AIM for directions and my phone number.
Hope to see you there!
#2
Piston Traitor
Join Date: Aug 2004
Location: McKinney, Tx
Posts: 341
Likes: 0
Received 0 Likes
on
0 Posts
I hate to sound like a complete idiot... but what exactly is the Fender Roller for? If anyone is interested in painting the driver's side of my car I'll be there! :D
Seriously, I think I'll come out. I don't have work and it will be neat to meet another group of people. I should see you there. *PMing for directions*
Seriously, I think I'll come out. I don't have work and it will be neat to meet another group of people. I should see you there. *PMing for directions*
#3
Registered
Thread Starter
iTrader: (1)
Join Date: Oct 2004
Location: Euless, TX
Posts: 152
Likes: 0
Received 0 Likes
on
0 Posts
While I could explain it, I think I'll use this quote instead as it's worded much better than anything I could ever write. I found it in another thread in the forums.
Basically, it's useful if you pan to use a wheel/tire combination that is slightly larger than what is generally known to fit on the car.
Originally Posted by connor@tirerack
For those reading that do not know what "rolling the fender lip" means, If you follow the fender down the side of the car above the wheel open you will feel a lip that is anywhere from .25" to .75" wide going into the wheel opening. This is called the fender lip. A "fender Roller" is a tool that attaches to your spindle using the lug nuts. It has an adjustable arm that rotates using the spindle as a center point. On the opposite end of the tool there is a soft rubber wheel that rests against the fender lip. When you roll the fender lip back and forth over the fender lip it will slowly fold the fender lip up against the inside of the fender. By doing this you gain a little more clearance inside the fender.
#4
Piston Traitor
Join Date: Aug 2004
Location: McKinney, Tx
Posts: 341
Likes: 0
Received 0 Likes
on
0 Posts
Oh I see...
Well, I don't have a lot to contribute, but I'll give it a shot. To try to get more people to show up, I'll bring the materials and install/help install the billet grilles like I have on my car. I have the 2 bars in the back and 2 bars across each oil cooler/fog light hole. All of the regular FW members have seen it and for those of you that haven't you can click on the link in my signature. If you like it and want it, come on out. I figure if you can pitch in $5-$10 for the parts I'll help or install it for you. I'll spread the word. My offer is good for anyone so come on out.
Well, I don't have a lot to contribute, but I'll give it a shot. To try to get more people to show up, I'll bring the materials and install/help install the billet grilles like I have on my car. I have the 2 bars in the back and 2 bars across each oil cooler/fog light hole. All of the regular FW members have seen it and for those of you that haven't you can click on the link in my signature. If you like it and want it, come on out. I figure if you can pitch in $5-$10 for the parts I'll help or install it for you. I'll spread the word. My offer is good for anyone so come on out.
#6
Piston Traitor
Join Date: Aug 2004
Location: McKinney, Tx
Posts: 341
Likes: 0
Received 0 Likes
on
0 Posts
If you plan on showing up and want to take my offer, just let me know ahead of time so I know how many supplies I need to bring. You can PM me or post it here.
#7
no more 8
Join Date: Aug 2004
Location: Mid-Cities area, TX
Posts: 498
Likes: 0
Received 0 Likes
on
0 Posts
i might try to make it by to this one...all depends on my sork schedule. besides...my car is in one of the garages right next to this place. maybe it will be done and i can shoe it off!!
#10
Registered
Thread Starter
iTrader: (1)
Join Date: Oct 2004
Location: Euless, TX
Posts: 152
Likes: 0
Received 0 Likes
on
0 Posts
I decided I'd go ahead and post the address here. I usually have people PM me so I have a better idea of how many people will be there, but I also realize that's somewhat inconvenient, so here you go...
6000 Huddleston St.
Haltom City, TX 76137
And by the way, as of right now, we're expecting to have at least six Mazda 6's and a few Mazdaspeed Protege's along with the RX-8's of those who have posted and possibly one more. Should hear from more people as the week goes on as well.
6000 Huddleston St.
Haltom City, TX 76137
And by the way, as of right now, we're expecting to have at least six Mazda 6's and a few Mazdaspeed Protege's along with the RX-8's of those who have posted and possibly one more. Should hear from more people as the week goes on as well.
#13
Originally Posted by Slims8
Amp kit??? Whatcha got? I love sound systems :D
#15
Circuit City or start coming to meets when Richard is there and make him your new best freind and help him out with whatever he needs. I have known him for quite a few years and did lots of work to that green civic for free, so I always get the hookup with him wheather it be getting into shows free or discounted car / audio stuff.
#16
Piston Traitor
Join Date: Aug 2004
Location: McKinney, Tx
Posts: 341
Likes: 0
Received 0 Likes
on
0 Posts
That will be pretty sweet. I installed my 1000w amp with a kicker solo baric 10 and it's sounds awesome. Probably the cleanest sounding system I've heard for 1 10" sub.
#17
no more 8
Join Date: Aug 2004
Location: Mid-Cities area, TX
Posts: 498
Likes: 0
Received 0 Likes
on
0 Posts
well i do have the hook up at circuit city!!! but i am always down for helping people out...for free! i don't need any compensation except for the satisfaction of a job well done and help that was appreciated. richard is a cool guy so anytime he needs my help and i can provide then i'm there!
#18
Piston Traitor
Join Date: Aug 2004
Location: McKinney, Tx
Posts: 341
Likes: 0
Received 0 Likes
on
0 Posts
Well, after all this I don't guess I'll be coming. Maybe I can take a raincheck for next time. You guys have a good time. I'm looking forward to seeing Mr Ed's car and Jenkins system. I promise I'll pay my dues next time.
#25
Is something going to be happening here tomorrow (I guess it's today now) or is everyone just hanging out? I thought I had plans around this time but I think those have been changed a little.