Grungepup

iTrader: (2)

so go with stock? dont really want to get them from around here.... NP is hella expensive, wanted to charge me $35 for a can of BG44K that i can get elsewhere for 20

9krpmrx8

iTrader: (46)

By stock I mean any API GL-4 or GL-5 75W-90. No need for any fancy stuff like syncromesh or anything like that. I wonder what brand the dealer uses?

tbk

iTrader: (3)

I'm down to check it out tomorrow after
work since I get off at 6

9krpmrx8

iTrader: (46)

Office closes at 6 so we are good after that. All new comers are welcome as long as you don't act a fool. I don't wanna cap a fool!

VS8

iTrader: (4)

were is the office

9krpmrx8

iTrader: (46)

4257 NW Loop 410
San Antonio, Texas 78229

I would say about 6:30 would be good.

Who is all coming?

VS8

iTrader: (4)

me...im still installing my new speakers

VS8

iTrader: (4)

well i got my speakers installed today...
does anyone know how to seafoam this car

Grungepup

iTrader: (2)

dont seafoam.... just go get a can of BG44K and put it in when you fill up

Grungepup

iTrader: (2)

I should be there tonight btw..... 9k send me a text to remind me lol

9krpmrx8

iTrader: (46)

Hoss is gonna be there too. I'm sure there is a DIY somewhere on the Seafoam, it can't be that hard though.

Grungepup

iTrader: (2)

"I used the Seafoam, The method is the same with a couple of exceptions. There is no need to pump it into the intake nipples
1. Pour 2oz of Seafoam into a cup
2. Attached flexible tube to nipple (not yours, the car's!)
3. Other end of the hose in cup
4. follow all the other steps


The intake creates enough vacuum to pull the Seafoam out of the cup. Just "start" the car 10 seconds at a time. I found after the 10 seconds the cup would not be completely empty but the vacuum would continue until the cup was finished
"

**edit**

tbk

iTrader: (3)

So since Scott drank all our leftover beer from last time, who's bringing some this time?

Grungepup

iTrader: (2)

i think you just volunteered lol

tbk

iTrader: (3)

But I bought it last install meet

VS8

iTrader: (4)

well im under 21 so yea

9krpmrx8

iTrader: (46)

Yeah no underage drinking! But we do have a vending machine

VS8

iTrader: (4)

did i say i was under 21 i meant to say im 24yrs old

9krpmrx8

iTrader: (46)

Grungepup

iTrader: (2)

just picked up a can of ZOOM POWER!!!!!!!!!! might do this tonight

9krpmrx8

iTrader: (46)

tbk

iTrader: (3)

These last few minutes of work are dragging by so slooooow

9krpmrx8

iTrader: (46)

Hey thanks for coming by Hoss, TBK, Grungepup, and VS8. BHR install went smooth as could be. I still haven't hit the 1,000 mile mark so I can't get on it but as soon as I do, I'm doing a oil switch to 0W30 or 0W40 and hitting the dyno.

I want a get a good baseline on my car to see where I'm at that way when I get the AP I can see what power can be made.

Thanks again guys!!! Can't wait for the next one as soon as my rear rotors come in and my Lebren Dually and dipsticks lights.

9krpmrx8

iTrader: (46)

9krpmrx8

iTrader: (46)

Coils are working great!!!. I'm almost to 1,000 miles and then its oil change time and 9krpm time!! I can definitely feel the power in my butt dyno up to 5-6k. I hope my dyno numbers do not depress me.