Official SARX Lounge
#4204
#4205
#4206
#4208
#4209
Pew Pew Pew
iTrader: (10)
Here's a few off my phone, I can email the huge ones if you pm me where to send them, had to shrink them down to fit. These are the "burnt" ones, they offer a couple of other colors as well. They "burn" each piece individually by hand as well as tint the washers to match.
Just on a sidenote, I'm not getting any kind of a magic deal or discount for mentioning this, I just had a really positive experience with Ryan saving me about 20-30 bucks in shipping while we were building the car for Sema. He called me on my cellphone on a Sunday to correct a shipping preference I had chosen, he could have easily just let it go and pocketed the extra cash but instead he chose to call and explain everything and double check the order etc etc. I don't know of ANY other company that would have done that.
I'd recommend going with the washers if you go this route also, they match nicely and really give it a finished look.
edit: I've done under the hood, the hood itself, and the trunk as they make nuts as well. I don't have any good pics of that I don't think, but I'll take some if interested, you also might be able to see some of that in the youtube vids in my sig.
Just on a sidenote, I'm not getting any kind of a magic deal or discount for mentioning this, I just had a really positive experience with Ryan saving me about 20-30 bucks in shipping while we were building the car for Sema. He called me on my cellphone on a Sunday to correct a shipping preference I had chosen, he could have easily just let it go and pocketed the extra cash but instead he chose to call and explain everything and double check the order etc etc. I don't know of ANY other company that would have done that.
![Smilie](https://www.rx8club.com/images/smilies/smile.gif)
edit: I've done under the hood, the hood itself, and the trunk as they make nuts as well. I don't have any good pics of that I don't think, but I'll take some if interested, you also might be able to see some of that in the youtube vids in my sig.
#4210
This guy backed into me in the Academy parking lot. Said he couldn't see me cuz I was too low lol. Good thing he was a fan of the 8. I think he was more pissed about the dent then I was lol.
Last edited by i3oots; 08-13-2011 at 02:46 PM.
#4211
SARX
iTrader: (2)
^ that sux at least the driver manned up about it. I would ask for a new door...
but look coilovers for $700...
https://www.rx8club.com/rx-8-parts-sale-wanted-44/megan-racing-32-way-coilover-system-221600/
but look coilovers for $700...
https://www.rx8club.com/rx-8-parts-sale-wanted-44/megan-racing-32-way-coilover-system-221600/
#4212
^ that sux at least the driver manned up about it. I would ask for a new door...
but look coilovers for $700...
https://www.rx8club.com/showthread.php?t=221600
but look coilovers for $700...
https://www.rx8club.com/showthread.php?t=221600
#4213
Pew Pew Pew
iTrader: (10)
I don't. Cheap coilovers that will always be cheap. They aren't much more brand new. If you just want the cheapest set you will ever find they are ok, but I think buying a set of LEGIT coilovers used will be a better investment.
Last edited by J8635621; 08-15-2011 at 09:03 AM.
#4214
http://www.meganracingperformance.co...coilovers.html
#4217
Would you guys recommend an AEM CAI or MS? Would they both produce similar results? The AEM is cheaper so I don't know if your just paying the extra cash just because it's an MS CAI but if they produce similar results and if you're ok with how they look I suppose it wouldn't matter. I've seen both intakes installed throughout the forum and haven't really heard about either of them breaking down or being defective.
#4218
Pew Pew Pew
iTrader: (10)
lol ok I'll help even though I doubt the effectiveness of your searching. MS = AEM 100% and they have "problems" with sucking up water. I've never had the problem and I've driven in HEAVY rain. The rx8 isn't up for fording a river Oregon Trail style no matter what intake you have.
#4219
SARX Legend
iTrader: (46)
![TX](https://www.rx8club.com/images/icons/tx.jpg)
For 180 more I can get new ones and free shipping lmao.
http://www.meganracingperformance.co...coilovers.html
http://www.meganracingperformance.co...coilovers.html
read this:
https://www.rx8club.com/showthread.p...ight=coilovers
Would you guys recommend an AEM CAI or MS? Would they both produce similar results? The AEM is cheaper so I don't know if your just paying the extra cash just because it's an MS CAI but if they produce similar results and if you're ok with how they look I suppose it wouldn't matter. I've seen both intakes installed throughout the forum and haven't really heard about either of them breaking down or being defective.
Last edited by 9krpmrx8; 08-15-2011 at 11:24 AM.
#4220
lol ok I'll help even though I doubt the effectiveness of your searching. MS = AEM 100% and they have "problems" with sucking up water. I've never had the problem and I've driven in HEAVY rain. The rx8 isn't up for fording a river Oregon Trail style no matter what intake you have.
![Big Grin](https://www.rx8club.com/images/smilies/biggrin.gif)
#4221
Do you want to go low or for your car to handle well?
read this:
https://www.rx8club.com/showthread.p...ight=coilovers
They are the same, if you have a choice and are still under warranty, get the MS since it is a factory part. Both tbk and grungepup had problems with water with the MS intake but like I said, the AEM (old version)/MS (no longer made) are the same. Personally I think intakes are a waste of money unless you just want the cool sound (it does sound badass).
read this:
https://www.rx8club.com/showthread.p...ight=coilovers
They are the same, if you have a choice and are still under warranty, get the MS since it is a factory part. Both tbk and grungepup had problems with water with the MS intake but like I said, the AEM (old version)/MS (no longer made) are the same. Personally I think intakes are a waste of money unless you just want the cool sound (it does sound badass).
#4222
SARX Legend
iTrader: (46)
![TX](https://www.rx8club.com/images/icons/tx.jpg)
IMO, there are so many knock offs out there (Stance included) that I would stick with something you can verify the origin on. Many "JDM" coilovers are made in Taiwan.