Official SARX Lounge
#5501
SARX Legend
iTrader: (46)
![TX](https://www.rx8club.com/images/icons/tx.jpg)
BBK's usually run around $1700+ for the fronts. Plus they usually add weight and do very little for performance unless you are putting down some serious numbers like 3 rotor status.
From what I've read on our cars the best setup is two piece rotors all around with good pads.
From what I've read on our cars the best setup is two piece rotors all around with good pads.
Yeah the factory brakes are very good. But they look like ****
![Lol](https://www.rx8club.com/images/smilies/lol.gif)
#5509
SWG is for all intensive purposes running a straight pipe (rp cat with the cat cut out and replaced with a blank) and it sounds really good, not to mention throws some pretty good little fire ***** at tailgaters ![Rollinglaugh](https://www.rx8club.com/images/smilies/rollinglaugh.gif)
just want a single piece, the welds dont seem to hold for long, in only two weeks she has already developed another small leak at the same point
![Rollinglaugh](https://www.rx8club.com/images/smilies/rollinglaugh.gif)
just want a single piece, the welds dont seem to hold for long, in only two weeks she has already developed another small leak at the same point
#5511
SARX Legend
iTrader: (46)
![TX](https://www.rx8club.com/images/icons/tx.jpg)
SWG is for all intensive purposes running a straight pipe (rp cat with the cat cut out and replaced with a blank) and it sounds really good, not to mention throws some pretty good little fire ***** at tailgaters ![Rollinglaugh](https://www.rx8club.com/images/smilies/rollinglaugh.gif)
just want a single piece, the welds dont seem to hold for long, in only two weeks she has already developed another small leak at the same point
![Rollinglaugh](https://www.rx8club.com/images/smilies/rollinglaugh.gif)
just want a single piece, the welds dont seem to hold for long, in only two weeks she has already developed another small leak at the same point
![Smilie](https://www.rx8club.com/images/smilies/smile.gif)
http://www.ebay.com/itm/OBX-Exhaust-...item2eb99330cb
#5514
Senior Member
iTrader: (1)
Screw that... 4".
http://www.lowes.com/pd_328912-131-L...uct&facetInfo=
Add this for better flow:
http://www.lowes.com/pd_234523-1061-...uct&facetInfo=
http://www.lowes.com/pd_328912-131-L...uct&facetInfo=
Add this for better flow:
http://www.lowes.com/pd_234523-1061-...uct&facetInfo=
#5517
what was I thinking
iTrader: (8)
WooHoo....after chewing the guy out and filling a claim to get the fire lit under his *** I will finally get my wheels on Monday
lets hope they are actually what I ordered (I am assuming I will be able to measure the +38 offset pretty easily?)
my 265 35 18 Pilot Sport A/S Plus's are impatiently waiting
Shady, I have an air chisel but I am going to Houston this weekend.....I could mail it to you or $14 at harbor freight? What exactly are you trying to accomplish with the chisel...is it busing related? I have a big drill press, possibly a job for a end mill or a reamer?
![Ylsuper](https://www.rx8club.com/images/smilies/ylsuper.gif)
my 265 35 18 Pilot Sport A/S Plus's are impatiently waiting
Shady, I have an air chisel but I am going to Houston this weekend.....I could mail it to you or $14 at harbor freight? What exactly are you trying to accomplish with the chisel...is it busing related? I have a big drill press, possibly a job for a end mill or a reamer?
#5518
#5519
WENTGERMAN
iTrader: (6)
WooHoo....after chewing the guy out and filling a claim to get the fire lit under his *** I will finally get my wheels on Monday
lets hope they are actually what I ordered (I am assuming I will be able to measure the +38 offset pretty easily?)
my 265 35 18 Pilot Sport A/S Plus's are impatiently waiting
Shady, I have an air chisel but I am going to Houston this weekend.....I could mail it to you or $14 at harbor freight? What exactly are you trying to accomplish with the chisel...is it busing related? I have a big drill press, possibly a job for a end mill or a reamer?
![Ylsuper](https://www.rx8club.com/images/smilies/ylsuper.gif)
my 265 35 18 Pilot Sport A/S Plus's are impatiently waiting
Shady, I have an air chisel but I am going to Houston this weekend.....I could mail it to you or $14 at harbor freight? What exactly are you trying to accomplish with the chisel...is it busing related? I have a big drill press, possibly a job for a end mill or a reamer?
It would make the sleeve removal much easier doing it with hand tools is rough. I'll figure it out though no worries man.
#5521
SARX Legend
iTrader: (46)
![TX](https://www.rx8club.com/images/icons/tx.jpg)
![Lol](https://www.rx8club.com/images/smilies/lol.gif)