Official SARX Lounge
That's good cuz ain't nobody got time for that! Anybody know where I can get some decent used tires? Never bought tires before and I plan on selling the 8 so I don't want to put too much money into it. I've been going on sites like NTB, discount tires etc. but most of them don't have used tires advertised online. I also need to replace the brakes and most likely the rotors too
O yeah. I will be lucky if i have a 50% chance of staying on board. Luckly they paid for me in full for a whole year so ill be good till Aug. That being said ill start looking early.
SARX Legend
iTrader: (46)
That's good cuz ain't nobody got time for that! Anybody know where I can get some decent used tires? Never bought tires before and I plan on selling the 8 so I don't want to put too much money into it. I've been going on sites like NTB, discount tires etc. but most of them don't have used tires advertised online. I also need to replace the brakes and most likely the rotors too
Thanks man I'll give him a call.
they did not pay me dirrect... i would be rich. they paid my company for a full year of my services at the end of aug last year so im stright till the end of aug. I work for Massive dynamic you may have seen them around. Massive Dynamic: What Don?t We Do?
Oh ok gotchya. Hey did you know they have an app now for the forum? I'm probably behind the curve and you guys already know lol
Posted From RX8Club.com Android App
Posted From RX8Club.com Android App
so maybe you guys can help. I installed the front air dam and front mud flaps yesterday and need to do the flares and rear today.
My question is ive been looking for the side stonguards to replace since i cut them without the proper tools... I just want a clean look. I keep looking all over the forum and other webstire but keep getting only front and rear stoneguards. Anyone know if im searching wrong?
My question is ive been looking for the side stonguards to replace since i cut them without the proper tools... I just want a clean look. I keep looking all over the forum and other webstire but keep getting only front and rear stoneguards. Anyone know if im searching wrong?
Originally Posted by i3oots
That's good cuz ain't nobody got time for that! Anybody know where I can get some decent used tires? Never bought tires before and I plan on selling the 8 so I don't want to put too much money into it. I've been going on sites like NTB, discount tires etc. but most of them don't have used tires advertised online. I also need to replace the brakes and most likely the rotors too 
Posted From RX8Club.com Android App
1st RX8 BNR Turbo Owner..
iTrader: (1)
Alright guys, I wanted to get some input on what I should sell my car for realistically. It has low compression on the engine, so its pretty much a roller at this point. It would be perfect for someone who wants to just buy a motor and put it into the car.
Below are the specs, what is a good starting price?
-2004 BB with red interior with less than 55k miles. Can't remember the exact mileage.
-Grand Touring Package (HID, Heated Seats, Power Drivers Seat, Homelink Mirror, 2 tone leather seats, Bose stereo, etc), DVD Navigation, rear spoiler.
-OEM Mazdaspeed Bodykit
-OEM Mazdaspeed springs and shocks/struts
-OEM Mazdaspeed front bumper, side skirts, and rear diffuser.
-Racingbeat Exhaust
-18" Tenzo Type-M Wheels
-35% tint
Below are the specs, what is a good starting price?
-2004 BB with red interior with less than 55k miles. Can't remember the exact mileage.
-Grand Touring Package (HID, Heated Seats, Power Drivers Seat, Homelink Mirror, 2 tone leather seats, Bose stereo, etc), DVD Navigation, rear spoiler.
-OEM Mazdaspeed Bodykit
-OEM Mazdaspeed springs and shocks/struts
-OEM Mazdaspeed front bumper, side skirts, and rear diffuser.
-Racingbeat Exhaust
-18" Tenzo Type-M Wheels
-35% tint
SARX Legend
iTrader: (46)
One of our guys just bought a clean 04' GT with low miles and a blown engine for under $2,000.00. So with the MS kit and exhaust I would say $3500.00 tops but $3,000.00 is a more fair price. The wheels are cheap and add no real value.
1st RX8 BNR Turbo Owner..
iTrader: (1)
interesting..was this here on the forums? $2,000 is dirt cheap...
what was I thinking
iTrader: (8)
its not on the forum, its a company in Dallas I asked them if I could bring my compression tester and they had no issues with it but I have decided to go a different route.
you just never know with an engine like that but I PM's you the link
you just never know with an engine like that but I PM's you the link
SARX Legend
iTrader: (46)
It was listed locally. Think about it, for most, an engine rebuild and installation is going to cost $5,000.00-$6,000.00 at the dealer (no other shops locally) and you have to deal with the hassle of getting it done and hope it is done right and that there are not a lot of extra charges (which there always is). You can buy a clean 04-05 with a low mileage reman for $7,000.00ish as is and be done with it. Many are selling after getting a reman put in by the dealer so a lot of the ones listed have low mileage remans in them already.
Your car has sat a long time, I am sure aside from the engine it needs other work as well.
****, I almost pulled the trigger on an 09' Touring in Houston with 7,000 miles on it. It was a one owner car and she only wanted $16,000.00. I found several other low mileage 09+ RX-8's in that range as well.
Your car has sat a long time, I am sure aside from the engine it needs other work as well.
****, I almost pulled the trigger on an 09' Touring in Houston with 7,000 miles on it. It was a one owner car and she only wanted $16,000.00. I found several other low mileage 09+ RX-8's in that range as well.
1st RX8 BNR Turbo Owner..
iTrader: (1)
Thanks for the input guys. I will make a decision here in the next couple of days. I am going to do some more number crunching.
If it spins it wins
Join Date: Nov 2012
Location: San Antonio, TX
Posts: 37
Likes: 0
Received 0 Likes
on
0 Posts
and even better for people wanting S1's and makes availability of parts easier too !! , it sucks but is good at same time...one reason i like the FC, alot of used parts(housing/irons/Rotors) for decent price.
Just picked up a 1000 zip ties and a pimp zip tie gun with adjustable tension and flush cut. Also all the zip ties have a stainless locking tooth and are rated for 50lbs.
I nerd out on the oddest things sometimes.
I nerd out on the oddest things sometimes.
WENTGERMAN
iTrader: (6)