Oklahoma RX-8's
#28
jump, you should see my car these days its quite changed from the stock newborn you saw years ago
I think ill finally get around to putting my straight pipe on this weekend.. SC hopefully this winter.
I think ill finally get around to putting my straight pipe on this weekend.. SC hopefully this winter.
#30
Any of you guys want to buy this AMP or these subs I have. $175 for the amp and $175 for the subs.
Here are the specs on the amp
Product Description:
* 1200 Watt Class D Subwoofer Amplifier
* Grand Touring Series
* Dynamic Power: 1339 watts @ 2 ohms
* Effective damping factor: 6.348 at 4 ohms
* Frequency response: 10 - 302Hz ( -3dB )
* Variable bass boost
* RCA low-level inputs
* Features a 12dB per octave electronic crossover
* Full-range preamp outputs
* Optional remote level bass control available
* Output regulation: .14dB at 4 ohms
* Dimensions ( L x W x H ): 18-11/16" x 12-5/16" x 2-3/8"
Amplifier Specifications:
* Amplifier Class N/A
* Number of Channels 1 - Mono
* RMS Power (4 ohms) 787 watts x 1 channel
* RMS Power (2 ohms) 1114 watts x 1 channel
* RMS Power (1 ohm) Not Stable
* Bridged RMS Power Not Bridgeable
* Peak Power Output 1339 watts @ 2 ohms
* Minimum Impedance Unbridged 2 ohms
* Minimum Impedance Bridged Not Bridgeable ohm
* THD at Rated RMS Power 1.0 %
* Speaker Level Inputs No
* Amp Preamp Outputs 1 pair
* Built-in Crossover 32 - 320Hz
* High-Pass Crossover Frequency
* Low-Pass Crossover Frequency
* Subsonic Filter
* Signal-to-Noise Ratio 70dBA (reference 1 watt into 4 ohms)
* Channel Separation N/A
* Bass Boost 0 - 12 dB
* Bass/Gain Remote N/A
* Fan Cooled No
* Fuse Rating 40 A x 3
Here are the specs on the subs.
Features
* Kevlar Impregnated Paper Cone
* Hi-Roll Nitrile-Butylene One-Piece Surround and Gasket
* Plus One Cone Technology
* New Proprietary Frame Design Maximizes Excursion while Minimizing Mounting Depth
* Stitched-in Tinsel Leads to Enchance Reliability and Eliminate Audible Tinsel-lead Slap
* Large Vented Motor Structure
* Long Excursion Progressive Spider for Better Control Over Linear Spider Designs
* Long Draw Proprietary Die Cast Basket
* Mounting Depth: 6 1/4"
* Cut-Out Diameter: 11 1/16"
Subwoofer Specifications
* Size: 12 inch
* Rec. Sealed Box Dims: 1.00 - 1.00 cu. ft.
* Rec. Ported Box Dims: 1.75 - 1.75 cu. ft.
* Free Air Usage: yes
* Sensitivity: 94 dB
* Frequency Response: 25-450 Hz
* Recommended RMS Power: 400W
* Peak Power Handling: 1,200W
* Impedance: dual 4 ohms subwoofer wiring options
Here are the specs on the amp
Product Description:
* 1200 Watt Class D Subwoofer Amplifier
* Grand Touring Series
* Dynamic Power: 1339 watts @ 2 ohms
* Effective damping factor: 6.348 at 4 ohms
* Frequency response: 10 - 302Hz ( -3dB )
* Variable bass boost
* RCA low-level inputs
* Features a 12dB per octave electronic crossover
* Full-range preamp outputs
* Optional remote level bass control available
* Output regulation: .14dB at 4 ohms
* Dimensions ( L x W x H ): 18-11/16" x 12-5/16" x 2-3/8"
Amplifier Specifications:
* Amplifier Class N/A
* Number of Channels 1 - Mono
* RMS Power (4 ohms) 787 watts x 1 channel
* RMS Power (2 ohms) 1114 watts x 1 channel
* RMS Power (1 ohm) Not Stable
* Bridged RMS Power Not Bridgeable
* Peak Power Output 1339 watts @ 2 ohms
* Minimum Impedance Unbridged 2 ohms
* Minimum Impedance Bridged Not Bridgeable ohm
* THD at Rated RMS Power 1.0 %
* Speaker Level Inputs No
* Amp Preamp Outputs 1 pair
* Built-in Crossover 32 - 320Hz
* High-Pass Crossover Frequency
* Low-Pass Crossover Frequency
* Subsonic Filter
* Signal-to-Noise Ratio 70dBA (reference 1 watt into 4 ohms)
* Channel Separation N/A
* Bass Boost 0 - 12 dB
* Bass/Gain Remote N/A
* Fan Cooled No
* Fuse Rating 40 A x 3
Here are the specs on the subs.
Features
* Kevlar Impregnated Paper Cone
* Hi-Roll Nitrile-Butylene One-Piece Surround and Gasket
* Plus One Cone Technology
* New Proprietary Frame Design Maximizes Excursion while Minimizing Mounting Depth
* Stitched-in Tinsel Leads to Enchance Reliability and Eliminate Audible Tinsel-lead Slap
* Large Vented Motor Structure
* Long Excursion Progressive Spider for Better Control Over Linear Spider Designs
* Long Draw Proprietary Die Cast Basket
* Mounting Depth: 6 1/4"
* Cut-Out Diameter: 11 1/16"
Subwoofer Specifications
* Size: 12 inch
* Rec. Sealed Box Dims: 1.00 - 1.00 cu. ft.
* Rec. Ported Box Dims: 1.75 - 1.75 cu. ft.
* Free Air Usage: yes
* Sensitivity: 94 dB
* Frequency Response: 25-450 Hz
* Recommended RMS Power: 400W
* Peak Power Handling: 1,200W
* Impedance: dual 4 ohms subwoofer wiring options
#32
#36
this morrning i saw a black 8 with the tag CMEZOOM this on the lake parwky
two days ago i honked at a yellow on the Heffner bridge and the parwky and later that day a red one getting off parwky at britton rd i am the sunlite silver
two days ago i honked at a yellow on the Heffner bridge and the parwky and later that day a red one getting off parwky at britton rd i am the sunlite silver
#40
#41
Mine's still a stock newborn only aftermarket thing is the spoiler on the back that's a Mazdaspeed one instead of the normal one.
#42
#44
I'm selling my high flow cat, if any of you would be interested in a local pickup I'd go 250$ on it. 2-3k miles used, good condition.
/Edit: sorry, sold already!
/Edit: sorry, sold already!
Last edited by w0rm; 08-30-2007 at 02:17 PM.
#48
#49
Okay guys, who can make it October 27th(last Sat in Oct) for the BBQ?
They will be hosting it at the Sheriff's training grounds(=track!) and food/drink will be 5$ a person. They are not making profit, just trying to recoup costs.
This is an all rotary event so expect to see 7's there. There's a really nice FD coming down more than likely from the tulsa area that I've driven down with to TX for a previous meet.
Typically we've had a Fall meet / Spring meet in Tulsa or Texas respectively but it seems the organization this year has fallen through and the OKC 7 guys have picked up the slack. We really need to show some 8's there. Anyone in?
Oh yeah, spotted a black 8 on mcgee yesterday.
They will be hosting it at the Sheriff's training grounds(=track!) and food/drink will be 5$ a person. They are not making profit, just trying to recoup costs.
This is an all rotary event so expect to see 7's there. There's a really nice FD coming down more than likely from the tulsa area that I've driven down with to TX for a previous meet.
Typically we've had a Fall meet / Spring meet in Tulsa or Texas respectively but it seems the organization this year has fallen through and the OKC 7 guys have picked up the slack. We really need to show some 8's there. Anyone in?
Oh yeah, spotted a black 8 on mcgee yesterday.
#50
Okay guys, who can make it October 27th(last Sat in Oct) for the BBQ?
They will be hosting it at the Sheriff's training grounds(=track!) and food/drink will be 5$ a person. They are not making profit, just trying to recoup costs.
This is an all rotary event so expect to see 7's there. There's a really nice FD coming down more than likely from the tulsa area that I've driven down with to TX for a previous meet.
Typically we've had a Fall meet / Spring meet in Tulsa or Texas respectively but it seems the organization this year has fallen through and the OKC 7 guys have picked up the slack. We really need to show some 8's there. Anyone in?
Oh yeah, spotted a black 8 on mcgee yesterday.
They will be hosting it at the Sheriff's training grounds(=track!) and food/drink will be 5$ a person. They are not making profit, just trying to recoup costs.
This is an all rotary event so expect to see 7's there. There's a really nice FD coming down more than likely from the tulsa area that I've driven down with to TX for a previous meet.
Typically we've had a Fall meet / Spring meet in Tulsa or Texas respectively but it seems the organization this year has fallen through and the OKC 7 guys have picked up the slack. We really need to show some 8's there. Anyone in?
Oh yeah, spotted a black 8 on mcgee yesterday.