KamiSpeed

Hey guys, we're now stocking up on all Zeitronix products; including the famous DashDaq XL.

Check out these awesome electronic products:

Zeitronix DashDaq XL + ZT-2
-$665shipped

• Zeitronix-DashDAQ display is Preconfigured for easy Plug and Play use with the Zt-2
• Display and data log AFR, RPM, EGT, Vacuum/Boost, TPS, and User Input from your Zt-2
• Run a Dual Zt-2 configuration for left and right cylinder bank AFR values!
• 4.4" Touch-Screen offers 480x272 resolution using TFT LCD technology.
• 24-bit full color display with contrast ratio of 350:1
• Dimensions are 5” x 3” x 1”, weight is only 0.5 lbs, (127mm x 77mm x 26mm, 275 grams)
• Full OBDII support for display of parameters such as Mass Air Flow, Spark Advance, Coolant Temperature, and many more! (OBDII is not required for use with the Zt-2.)
• Data logging support onto removable memory card -- no laptop or PDA required.
• Auto Adjusting backlight, night mode, and low power standby.
• Calculate Horsepower, Torque, 0 to 60 Performance, MPG and set configurable trip counters.
• Diagnose and clear check engine light error codes.
• OBDII and Plug and Play Zeitronix Zt-2 cables included.
• DashDAQ Zt-2 license included ($50 value)
• Simple and secure windshield-mounted display.

• Log Zt-2 data and OBDII data on optional MMC/SD memory cards (up to 4GB in size).
• Supports Full OBDII for 1996 and newer vehicles (Zt-2 parameters from any vehicle)
• Log and View up to 24 parameters at once for hours at a time
• Zt-2 - DashDAQ connector cable included
• Connect two to log left and right cylinder banks in our Dual Zt-2 configuratio
• 
  

Included with this kit is the Zeitronix ZT-2, so you can measure AFR ratio (wideband) and it has the capability to adapt a direct EGT sensor, Boost, and an additional temperature sensor. The rest will read from the car's computer. Combined with the DashDaq, everything can be read from one screen and also dataloged.

slvrstreak

iTrader: (3)

figure out a way to mount them in the radio face and they will sale like crazy!

paulmasoner

iTrader: (1)

the screen is too big to fit in the lower radio blank.
the scangauge will not even fit well

KamiSpeed

You can mounted up on the dash like so:



Here's a thread of how someone did this, but with a different touch screen:

http://www.mp3car.com/vbulletin/show...up-screen.html

The DashDaq XL is actually pretty small, so'll fit there or here:

Or you can use this mount and fit it on the openeing. You'll just have to fill it on the sides with custom fiberglass mount or use a CF cover and mount this on top:

KamiSpeed

tttttt