Notices

ATTENTION CURRENT MazdaManiac CUSTOM CALIBRATION CUSTOMERS

Thread Tools
 
Search this Thread
 
Rate Thread
 
Old 03-22-2011, 07:44 PM
  #226  
SPOOLN8
iTrader: (1)
 
RotaryMachineRx's Avatar
 
Join Date: Nov 2008
Location: Edmonton, Alberta, Canada
Posts: 2,251
Received 220 Likes on 165 Posts
Originally Posted by Pstone
Also, full blast AC isn't going to be pleasant if the temp stays in the mid 30's.

Dude... AC has nothing to do with Temperature, you can run it with the heat on
Old 03-22-2011, 08:00 PM
  #227  
Registered
iTrader: (4)
 
Pstone's Avatar
 
Join Date: Jul 2009
Location: Minnesota
Posts: 107
Likes: 0
Received 0 Likes on 0 Posts
Originally Posted by RotaryMachineRx
Dude... AC has nothing to do with Temperature, you can run it with the heat on
Well, I usually use AC on the cold setting.....
Old 03-23-2011, 06:11 AM
  #228  
Registered
 
Blacknightz's Avatar
 
Join Date: Apr 2009
Posts: 918
Likes: 0
Received 0 Likes on 0 Posts
Originally Posted by MazdaManiac
Tuesday, March 29th
10:00am - 1:00pm
5:00pm - 7:00pm
11:00pm - 1:00am

Arizona Time (same as Pacific Daylight Time or GMT - 7 hours)

I am going to finalize this next week, but it looks like from now on, this is the method we are going to employ. I will do this every Tuesday, unless there is a conflict or a better day/time system avails itself to me.

There will be new instructions, new instructions instructions and new calibration info.

for those in the GMT +8 area...
Wednesday, March 30th....

1 am - 4 am
8 am - 10 am
2 pm - 4pm


Jeff... i thinki figured out what has happened to my crazy MAF readings...
post #20

https://www.rx8club.com/showthread.p...=1#post3921239
Old 03-24-2011, 11:02 PM
  #229  
Registered
iTrader: (3)
 
dezau's Avatar
 
Join Date: Mar 2009
Location: Windermere, FL
Posts: 1,711
Likes: 0
Received 2 Likes on 2 Posts
jeff, could you update the 1st post everytime there's a new session? its gonna get confusing to crawl through every page to look for the latest event
thanks
Old 03-25-2011, 12:05 AM
  #230  
SPOOLN8
iTrader: (1)
 
RotaryMachineRx's Avatar
 
Join Date: Nov 2008
Location: Edmonton, Alberta, Canada
Posts: 2,251
Received 220 Likes on 165 Posts
Originally Posted by MazdaManiac
I am going to finalize this next week, but it looks like from now on, this is the method we are going to employ. I will do this every Tuesday...

^^ Right Here
Old 03-25-2011, 09:16 AM
  #231  
Registered User
 
InfoSecRX8's Avatar
 
Join Date: Mar 2010
Posts: 6
Likes: 0
Received 0 Likes on 0 Posts
just got mine ordered today! looking forward to it!!!
Old 03-25-2011, 09:30 AM
  #232  
Spinning Dorito Junkie
iTrader: (2)
 
Redshift's Avatar
 
Join Date: Jul 2003
Location: Halifax, Nova Scotia, Canada
Posts: 747
Likes: 0
Received 1 Like on 1 Post
Really glad to hear this is becoming an every Tuesday thing. Was looking forward to getting my car tuned this coming Tuesday, but the current forecast has snow flurries this weekend with barely above freezing temps next week. Not sure I'll bother putting the insurance back on the 8 yet...
Come on Tuesday after this one!
Old 03-25-2011, 01:58 PM
  #233  
Banned
Thread Starter
iTrader: (3)
 
MazdaManiac's Avatar
 
Join Date: Oct 2003
Location: Under my car
Posts: 16,386
Likes: 0
Received 25 Likes on 21 Posts
first post updated
Old 03-25-2011, 07:38 PM
  #234  
Drummond Built
iTrader: (6)
 
WTBRotary!'s Avatar
 
Join Date: Aug 2008
Location: DFW, Texas
Posts: 3,703
Likes: 0
Received 0 Likes on 0 Posts
Originally Posted by Redshift
Really glad to hear this is becoming an every Tuesday thing. Was looking forward to getting my car tuned this coming Tuesday, but the current forecast has snow flurries this weekend with barely above freezing temps next week. Not sure I'll bother putting the insurance back on the 8 yet...
Come on Tuesday after this one!

Lol its already getting in the 90's for Texas and spring JUST hit, lol its already summer... Damn man...
Old 03-25-2011, 08:22 PM
  #235  
SPOOLN8
iTrader: (1)
 
RotaryMachineRx's Avatar
 
Join Date: Nov 2008
Location: Edmonton, Alberta, Canada
Posts: 2,251
Received 220 Likes on 165 Posts
Still have piles of snow here too
Attached Thumbnails ATTENTION CURRENT MazdaManiac CUSTOM CALIBRATION CUSTOMERS-img_0172.jpg  
Old 03-26-2011, 06:50 PM
  #236  
Spinning Dorito Junkie
iTrader: (2)
 
Redshift's Avatar
 
Join Date: Jul 2003
Location: Halifax, Nova Scotia, Canada
Posts: 747
Likes: 0
Received 1 Like on 1 Post
Originally Posted by WTBRotary!
Lol its already getting in the 90's for Texas and spring JUST hit, lol its already summer... Damn man...
That sounds nice right about this point. No such luck here. A few snow flurries today actually, although nothing is sticking. Should creep up above freezing temperatures this week.
First taste of summer weather I'll probably get will be at the Deal's Gap Rally.
I just want to get my car tuned before the trip.
Old 03-26-2011, 06:55 PM
  #237  
Oooh, shiny!
iTrader: (1)
 
maskedferret's Avatar
 
Join Date: Oct 2006
Location: St. Louis, MO
Posts: 908
Likes: 0
Received 2 Likes on 2 Posts
Originally Posted by Redshift
That sounds nice right about this point. No such luck here. A few snow flurries today actually, although nothing is sticking. Should creep up above freezing temperatures this week.
First taste of summer weather I'll probably get will be at the Deal's Gap Rally.
I just want to get my car tuned before the trip.
We had weather in the 70s-80s last week; there is now 6 inches of snow on the ground.
Old 03-28-2011, 06:15 PM
  #238  
Registered User
 
Canyonman's Avatar
 
Join Date: Jan 2009
Location: Santa Clarita, CA
Posts: 7
Likes: 0
Received 0 Likes on 0 Posts
Is it Tuesday yet?

For folks in Northern LA county I found the greatest place to collect data last night. Exit the 5 Fwy at Roxford Rd and run north along the West side of the 5 on San Fernando road. You can wait at each end until it is clear. Its been tough the previous times doing this with traffic or curves in the road. I am guessing that us in Southern Cal all have difficulty finding the right road for this. i have not found anywhere near Gardena where I could make these runs in daylight so am doing one each tuning day which should still get me done by the end of April if not sooner.
Old 03-29-2011, 02:35 AM
  #239  
Registered
 
Blacknightz's Avatar
 
Join Date: Apr 2009
Posts: 918
Likes: 0
Received 0 Likes on 0 Posts
Jeff... when will the next submission be after this 29th March?
Old 03-29-2011, 08:21 AM
  #240  
Spinning Dorito Junkie
iTrader: (2)
 
Redshift's Avatar
 
Join Date: Jul 2003
Location: Halifax, Nova Scotia, Canada
Posts: 747
Likes: 0
Received 1 Like on 1 Post
Dumb question, but the ambient air temperature doesn't matter, right? The bit of snow that fell yesterday is gone, so I brought the RX8 out for it's season debut to go to work this morning. Air temp is 2C and according to the AP my intake air temp was 42F. I want to try and get a tune or two submitted today.

Upside is, car started for the first time of the year on the newly downloaded v1 map that MM sent me, and it fired up great and I'm pretty sure idled smoother than before. I'm really looking forward to getting this process completed.
Old 03-29-2011, 12:50 PM
  #241  
Registered
iTrader: (1)
 
darnellm's Avatar
 
Join Date: Dec 2005
Location: Baltimore, MD
Posts: 394
Received 2 Likes on 2 Posts
Anyone submit datalogs to MM today?
Looking to get cal v4_0_3
Currently a 60 minute wait
Old 03-29-2011, 01:13 PM
  #242  
Registered User
iTrader: (1)
 
apotheus's Avatar
 
Join Date: Oct 2010
Posts: 2
Likes: 0
Received 0 Likes on 0 Posts
Woo, got my 4_0_1. Now if I could just get my car home from the shop...
Old 03-29-2011, 01:34 PM
  #243  
Spinning Dorito Junkie
iTrader: (2)
 
Redshift's Avatar
 
Join Date: Jul 2003
Location: Halifax, Nova Scotia, Canada
Posts: 747
Likes: 0
Received 1 Like on 1 Post
I was thinking of taking the scenic route home from work and doing some logging on the way. If I understand this thread correctly, we no longer need two drive cycles, correct? Just put the map on, drive it long enough to warm it thoroughly, and then let it cool down?
Old 03-29-2011, 02:32 PM
  #244  
Registered Badass
iTrader: (1)
 
TrevorsTII's Avatar
 
Join Date: Sep 2008
Location: Tacoma/JBLM
Posts: 434
Likes: 0
Received 0 Likes on 0 Posts
Originally Posted by Redshift
I was thinking of taking the scenic route home from work and doing some logging on the way. If I understand this thread correctly, we no longer need two drive cycles, correct? Just put the map on, drive it long enough to warm it thoroughly, and then let it cool down?
You still DO need to do the 2 drive cycles. So be sure to do them so he doesn't reject your submission.
Old 03-29-2011, 02:55 PM
  #245  
Spinning Dorito Junkie
iTrader: (2)
 
Redshift's Avatar
 
Join Date: Jul 2003
Location: Halifax, Nova Scotia, Canada
Posts: 747
Likes: 0
Received 1 Like on 1 Post
Ok. Thanks for clarifying. I wasn't totally sure based on the earlier comments about people doing 5 or 6 maps in the run of a day.
Old 03-29-2011, 03:27 PM
  #246  
Registered
iTrader: (4)
 
Pstone's Avatar
 
Join Date: Jul 2009
Location: Minnesota
Posts: 107
Likes: 0
Received 0 Likes on 0 Posts
Originally Posted by TrevorsTII
You still DO need to do the 2 drive cycles. So be sure to do them so he doesn't reject your submission.
When doing the online tuning on Tuesdays, you don't need to do the drive cycles. I have 4.0.1 done and the logs are in waiting for 4.0.2.
Old 03-29-2011, 04:34 PM
  #247  
Registered Badass
iTrader: (1)
 
TrevorsTII's Avatar
 
Join Date: Sep 2008
Location: Tacoma/JBLM
Posts: 434
Likes: 0
Received 0 Likes on 0 Posts
Originally Posted by Pstone
When doing the online tuning on Tuesdays, you don't need to do the drive cycles. I have 4.0.1 done and the logs are in waiting for 4.0.2.
That is not what the Instructions say.
Old 03-29-2011, 04:41 PM
  #248  
#50
 
bse50's Avatar
 
Join Date: Nov 2007
Location: Caput Mundi
Posts: 7,521
Received 11 Likes on 11 Posts
Originally Posted by TrevorsTII
That is not what the Instructions say.
Why don't you read this thread thoroughly?
https://www.rx8club.com/showpost.php...&postcount=148

meh... lazy americans
Old 03-29-2011, 04:53 PM
  #249  
Registered Badass
iTrader: (1)
 
TrevorsTII's Avatar
 
Join Date: Sep 2008
Location: Tacoma/JBLM
Posts: 434
Likes: 0
Received 0 Likes on 0 Posts
Originally Posted by bse50
Why don't you read this thread thoroughly?
https://www.rx8club.com/showpost.php...&postcount=148

meh... lazy americans
I wasn't the one looking for the answer. That is why i didn't read through the threads. No need to call me lazy. I got my information from his instructions that he sends with his tunes, for people above the first tune so i figured they would be accurate.
Old 03-29-2011, 05:57 PM
  #250  
#50
 
bse50's Avatar
 
Join Date: Nov 2007
Location: Caput Mundi
Posts: 7,521
Received 11 Likes on 11 Posts
You should laugh more.


You have already rated this thread Rating: Thread Rating: 0 votes,  average.

Quick Reply: ATTENTION CURRENT MazdaManiac CUSTOM CALIBRATION CUSTOMERS



All times are GMT -5. The time now is 06:30 PM.