Cobb AccessPORT Discussion
05-17-2008, 11:02 AM
#2651
Tailgaters beware
The tires are already pretty new, I think I'll go with the BHR Clutch
I figured that would have something to do with it... But!
My tires only spun to about 25-30 mph, I hit 60 in 2nd gear, so my guess is... it doesn't start measuring time until the car moves which for about a second the car spins then starts moving, by then there is already tire momentum built up by the spin so the car gets to 60 kind of quickly. The timer should have started right when the clutch was released not when the car moved. I also think it doesn't start counting until maybe 2-4 mph, not first motion.
Last edited by Rocketman1976; 05-17-2008 at 11:07 AM.
05-17-2008, 11:34 AM
#2654
Administrator
iTrader: (7)
^^ hugs are extra.
05-17-2008, 11:59 AM
#2656
Tailgaters beware
If anyone lives in the SE Near Florida and would like to get together for a Dyno tune session with Jeff aka MazdaManiac and Charles Hill please add your name to the list on the thread below
https://www.rx8club.com/se-rx-8-forum-30/florida-accessport-dyno-day-feeler-145146/
https://www.rx8club.com/se-rx-8-forum-30/florida-accessport-dyno-day-feeler-145146/
05-17-2008, 05:39 PM
#2659
Tailgaters beware
Jeff on the Cobb website you asked why I wasn't using your 1c_0 tunes, I don't have any of those just the base maps for establishing the STFT and LTFT 1a and 1b.
05-17-2008, 11:01 PM
#2660
Registered
Join Date: Sep 2006
Location: Madison, WI
Posts: 1,202
Likes: 0
Received 0 Likes
on
0 Posts
I just sent out a mass e-mail to everyone that got an AccessPORT.
I'm trying to rein in all of the requests for calibrations, corrections and special needs.
Please answer the questions if you have time - even if you have recently sent an e-mail to me (if it is more convenient, you can attach the recent e-mails along withe the other information requested.
Thanks!
I'm trying to rein in all of the requests for calibrations, corrections and special needs.
Please answer the questions if you have time - even if you have recently sent an e-mail to me (if it is more convenient, you can attach the recent e-mails along withe the other information requested.
Thanks!
05-18-2008, 12:56 AM
#2661
Here is my flame show and the obnoxious sound if your curious.
http://www.youtube.com/watch?v=yTCJZLFc9Po
Your saying with a proper tune it won't do this anymore?
http://www.youtube.com/watch?v=yTCJZLFc9Po
Your saying with a proper tune it won't do this anymore?
how long did you drive before you did that to get it so hot?
were you redlining it then letting off the gas during the video to get the flames?
the racing beat exhaust doesnt seem to shoot flames very well lol. seems like it stops quite a bit of them.
05-18-2008, 06:59 AM
#2662
Tailgaters beware
What I do is floor it just for a second around 7200 rpms and then let off, then when the rpms drop just below 7200 floor it again. There is a sweet spot where the ecu dumps in fuel because of the 3rd set of ports opening. Whenever you hit it just right, it will shoot out 2 foot flames. You can see a nice one in my avatar which was a snap shot taken the same night.
05-19-2008, 04:54 PM
#2663
Tailgaters beware
Why does the Cobb Stage 1 suck so bad?
I know they say "made for a stock RX-8", but all I have is Cat-Back and K&N replacement filter and the Cobb preset tune is almost bad enough to destroy my motor.
I did a 3rd gear pull today and it was at 14.7 at 7000 then as I climbed in rpm's the ratio also climbed to 15.3.
MM did you have chance to make a 1c map that is based on my setup?
I'm going back to stock again after seeing that 15.3, in the lower gears it was too quick to really see how high it was going.
I know they say "made for a stock RX-8", but all I have is Cat-Back and K&N replacement filter and the Cobb preset tune is almost bad enough to destroy my motor.
I did a 3rd gear pull today and it was at 14.7 at 7000 then as I climbed in rpm's the ratio also climbed to 15.3.
MM did you have chance to make a 1c map that is based on my setup?
I'm going back to stock again after seeing that 15.3, in the lower gears it was too quick to really see how high it was going.
Last edited by Rocketman1976; 05-19-2008 at 07:12 PM.
05-19-2008, 11:00 PM
#2664
Why does the Cobb Stage 1 suck so bad?
I know they say "made for a stock RX-8", but all I have is Cat-Back and K&N replacement filter and the Cobb preset tune is almost bad enough to destroy my motor.
I did a 3rd gear pull today and it was at 14.7 at 7000 then as I climbed in rpm's the ratio also climbed to 15.3.
MM did you have chance to make a 1c map that is based on my setup?
I'm going back to stock again after seeing that 15.3, in the lower gears it was too quick to really see how high it was going.
I know they say "made for a stock RX-8", but all I have is Cat-Back and K&N replacement filter and the Cobb preset tune is almost bad enough to destroy my motor.
I did a 3rd gear pull today and it was at 14.7 at 7000 then as I climbed in rpm's the ratio also climbed to 15.3.
MM did you have chance to make a 1c map that is based on my setup?
I'm going back to stock again after seeing that 15.3, in the lower gears it was too quick to really see how high it was going.
They know you don't hold it at that rpm for very long. It carbon cleaning w/the best power.
I agree it's way too lean.
05-19-2008, 11:35 PM
#2667
05-19-2008, 11:44 PM
#2670
05-19-2008, 11:50 PM
#2673
Asshole for hire
iTrader: (1)
Join Date: Jun 2006
Location: Colfontaine, Belgium
Posts: 3,214
Likes: 0
Received 3 Likes
on
3 Posts
blah.. just plugged in... all the MM maps are greyed out and un-selectable... working on it...
and Stealth: thanks for the info with the cat... wish i had known the matting was fiberglass... itchy!
and Stealth: thanks for the info with the cat... wish i had known the matting was fiberglass... itchy!