Cobb AccessPORT Discussion
#5201
Hmmmmmm.........
Join Date: Mar 2005
Location: Melbourne, Australia
Posts: 3,564
Likes: 0
Received 6 Likes
on
4 Posts
All off the top of my head so may not be 100% accurate.
Cheers
Andrew
#5204
Okay, I just purchased an AP after reading this entire thread. Can't wait to get started. Okay, so here is my question - while I'm waiting on adjusted calibrations and maps, or in between, or whatever is there any harm or affect on tuning if I just uninstall the AP and run on the factory ecu instead of daily driving on the base calibrations or whatever that are on the fat side - particularly for autocross events.
#5206
Okay, I just purchased an AP after reading this entire thread. Can't wait to get started. Okay, so here is my question - while I'm waiting on adjusted calibrations and maps, or in between, or whatever is there any harm or affect on tuning if I just uninstall the AP and run on the factory ecu instead of daily driving on the base calibrations or whatever that are on the fat side - particularly for autocross events.
If anything, running the base calibration will benefit your RX8 better than going back to the stock mapping. You have the option of uninstalling the AP but I'd suggest just sticking with the base calibration until your custom one arrives.
#5207
Second car, first rotary.
When you go into install and it detects an unsupported ECU, press OK, then go to the User Tools menu and there is an option to download a dump of the ECU. DO that, then via the AccessPort Manager select Advanced and there is an option to download the dump to your PC. Take that and email it to MM or whomever you purchased it off.
All off the top of my head so may not be 100% accurate.
Cheers
Andrew
All off the top of my head so may not be 100% accurate.
Cheers
Andrew
Add to that that I have an intermittent CEL and it would be really useful to be able to read that when it appears.
#5209
Second car, first rotary.
Thanks,
catalin
Last edited by catalin; 02-12-2009 at 04:10 PM.
#5210
The remainder of the Australian ROMs should be supported very soon, if they aren't already.
Australia is somewhat unique in that, not only are there the "standard" two calibrations, but there are both "legitimate" and "gray-market" JDM ROMs running around out there.
There are also quite a few people with Euro and North American ROMs.
Strange place.
#5216
Guest
Posts: n/a
A few weeks ago you told me, that you are waiting for the Euro spec APs. Now you told me, it went out last year...I never got it...
Cheers,
Moe.
Still waiting on Cobb to send me my first batch of Euro-spec and Asian-spec AccessPORTs.
They are trying to integrate all of the international firmware into one package as well as the software.
I had expected to receive them yesterday (as that is the date they gave me), but I haven't gotten a confirmation of that yet.
I don't think its more than a few more days off.
They are trying to integrate all of the international firmware into one package as well as the software.
I had expected to receive them yesterday (as that is the date they gave me), but I haven't gotten a confirmation of that yet.
I don't think its more than a few more days off.
Moe.
#5217
So, I'm confused (because I don't know who anyone is here, for the most part).
You have a shipping confirmation from back in September.
I don't think the above response was meant for you specifically. Just a general answer for people in Europe.
Your AP is listed as USDM spec (which is what you ordered). Are you expecting me to send you a second unit?
You have a shipping confirmation from back in September.
I don't think the above response was meant for you specifically. Just a general answer for people in Europe.
Your AP is listed as USDM spec (which is what you ordered). Are you expecting me to send you a second unit?
#5218
Guest
Posts: n/a
So, I'm confused (because I don't know who anyone is here, for the most part).
You have a shipping confirmation from back in September.
I don't think the above response was meant for you specifically. Just a general answer for people in Europe.
Your AP is listed as USDM spec (which is what you ordered). Are you expecting me to send you a second unit?
You have a shipping confirmation from back in September.
I don't think the above response was meant for you specifically. Just a general answer for people in Europe.
Your AP is listed as USDM spec (which is what you ordered). Are you expecting me to send you a second unit?
Cheers,
Moe.
Last edited by Kazuma; 02-13-2009 at 03:53 PM.
#5222
Registered Noob
Join Date: Sep 2007
Location: Long Island (Suffolk), NY
Posts: 808
Likes: 0
Received 0 Likes
on
0 Posts
I mean if he says there was a shipping confirmation, it means he sent it out. Sounds like an issue to raise with shipping carrier. Maybe someone snatched it off a doorstep. In anycase, waiting several months before bringing it to the attention of the appropriate parties might very well have left you with no options. Shippinh carrier might be uncooperative at this point.
#5223
Reginald P. Billingsly
iTrader: (5)
I've heard recently Cobb has released speed density tuning on their subaru units, I was wondering if this is the same thing as MAP tuning? Also anything like this in the future for the 8, or is it unlikely cause the majority of 8's and not going to see positive manifold pressure, which to my understanding is how MAP works, by measuring the amount of pressure inside the intake manifold? Any info would be appreciated.
#5224
I've heard recently Cobb has released speed density tuning on their subaru units, I was wondering if this is the same thing as MAP tuning? Also anything like this in the future for the 8, or is it unlikely cause the majority of 8's and not going to see positive manifold pressure, which to my understanding is how MAP works, by measuring the amount of pressure inside the intake manifold? Any info would be appreciated.
Its good to 2 BAR.
This would be used in conjunction with the MAF, just like the Subies.
#5225
Administrator
iTrader: (7)
helllllo boost reading!