New Mexico?
#776
Registered
Join Date: Oct 2005
Location: Moriarty, New Mexico
Posts: 202
Likes: 0
Received 0 Likes
on
0 Posts
Hi All,
Long time no talk, sounds like most of us are busy thanks to holidays. Well bad news is that I ran over 4 pigeons yesterday coming to work. It was total carnage, feathers and blood everywhere. The crappy thing is one of them destroyed my driver side fog light. So let me warn you very, very expensive. One from the dealer is 250.00 for one, found one used one for 125.00 and a new set of 2 clear is 250.00. So I think I will be buying the blue set as they are about 200.00. I should have turned around and ran over the rest of them. So avoid those flying rats.
Glad to see new members. Busy time of year to get a drive organized.
Will, still waiting for those race times to be posted…
Long time no talk, sounds like most of us are busy thanks to holidays. Well bad news is that I ran over 4 pigeons yesterday coming to work. It was total carnage, feathers and blood everywhere. The crappy thing is one of them destroyed my driver side fog light. So let me warn you very, very expensive. One from the dealer is 250.00 for one, found one used one for 125.00 and a new set of 2 clear is 250.00. So I think I will be buying the blue set as they are about 200.00. I should have turned around and ran over the rest of them. So avoid those flying rats.
Glad to see new members. Busy time of year to get a drive organized.
Will, still waiting for those race times to be posted…
#778
general user
Join Date: Aug 2006
Location: New Mexico
Posts: 663
Likes: 0
Received 0 Likes
on
0 Posts
As you know, I had my engine tested and lastest flash installed. No new engine needed, though with the new flash, I am getting ~2-3 mpg less which puts me at 15-16mpg mixed driving (65% highway). I used to get a steady 18mpg.
Either way, How was everyones ThanksGivving?
Either way, How was everyones ThanksGivving?
#779
Registered
Join Date: Oct 2005
Location: Moriarty, New Mexico
Posts: 202
Likes: 0
Received 0 Likes
on
0 Posts
Hope all had a happy turkey day.
Well update on my car. So I got my new Fog Lights, I went with the Amber and they look great. However this morning after driving for 40 minutes coming to work, my check engine light came on and will not turn off. No weird noises from the engine just the light. So I call University and they tell me not to bring it in and that I must make an appointment. So they are ok with me driving around with my check engine light. Hmmmmm Then my car still starts more poorly since the recall, which I mentioned to the dealer. So I really think the recall didn't help my car. Won't know what is going on until first week of December or until what ever is wrong blows up. Happy Driving.
Happy Holidays.
Well update on my car. So I got my new Fog Lights, I went with the Amber and they look great. However this morning after driving for 40 minutes coming to work, my check engine light came on and will not turn off. No weird noises from the engine just the light. So I call University and they tell me not to bring it in and that I must make an appointment. So they are ok with me driving around with my check engine light. Hmmmmm Then my car still starts more poorly since the recall, which I mentioned to the dealer. So I really think the recall didn't help my car. Won't know what is going on until first week of December or until what ever is wrong blows up. Happy Driving.
Happy Holidays.
#781
Registered
Join Date: Oct 2005
Location: Moriarty, New Mexico
Posts: 202
Likes: 0
Received 0 Likes
on
0 Posts
anyone with a scan tool want to meet with me sometime this week after 6pm or this weekend to check it out? would love the help...
Last edited by NMOcho; 11-27-2006 at 03:42 PM.
#783
Registered
Join Date: Oct 2005
Location: Moriarty, New Mexico
Posts: 202
Likes: 0
Received 0 Likes
on
0 Posts
hey all. well fred was great and stopped by and hooked up the scanner. code 300. random miss fire. cleared the code and so far so good. so glad only that. we should consider a dinner meet and greet for a friday or saturday night. should go to buccas and reserve the pope room.
#786
general user
Join Date: Aug 2006
Location: New Mexico
Posts: 663
Likes: 0
Received 0 Likes
on
0 Posts
Friday and saterday work for me. Sounds fun.
I may not have a car though. Since i have had the car, when I press on my breaks for the first time per day (or after a long period of no driving), the brake cylinder makes noise and the brake pedel shakes a bit. Mazda said this is normal. Now, however, my brakes do not release right away when I left go, which makes for jerky rides for 20 minutes.
But... I will have at least a rental car (which are indestructable), so im perfectly willing to meet everyone this weekend.
I may not have a car though. Since i have had the car, when I press on my breaks for the first time per day (or after a long period of no driving), the brake cylinder makes noise and the brake pedel shakes a bit. Mazda said this is normal. Now, however, my brakes do not release right away when I left go, which makes for jerky rides for 20 minutes.
But... I will have at least a rental car (which are indestructable), so im perfectly willing to meet everyone this weekend.
#789
Today at Noon, Bernard is doing "League" racing. I don't know details, but just saw it on their forums.
Late notice, but hope to see some of you guys there....
Rt 66 Karting
Late notice, but hope to see some of you guys there....
Rt 66 Karting
#790
hello everyone,
Its been a while since ive been on here. Just wanted to say hi and say that im going to be around here a lot more often now...also i should be getting my turbo in the next 2 or 3 months and I was wondering if anyone could help me to tune it..Thanks in advance and I hope to meet everyone.
steve
Its been a while since ive been on here. Just wanted to say hi and say that im going to be around here a lot more often now...also i should be getting my turbo in the next 2 or 3 months and I was wondering if anyone could help me to tune it..Thanks in advance and I hope to meet everyone.
steve
#791
Former Rx-8 Owner
Join Date: Mar 2006
Location: Albuquerque, NM
Posts: 66
Likes: 0
Received 0 Likes
on
0 Posts
So, this isn't really a 'kill' or anything but I think I did gain the 8 a bit of respect the other night...
So, my wife and I were going out to dinner the other night and after pulling onto Ladera I noticed that the guy behind me who was completely riding my **** started to gun it to go around me.
Well, I was in 2nd gear around 6k rpm so I punched it too... he stopped gaining ground on me when he was about even with my rear wheel. At that point I noticed it was a black 350Z which lives somewhere in the subdivision where I live.
After that, the guy didn't try to go around me any more even though he ended up following me all the way onto I-40, through the big-I onto I-25 until I exited at Montgomery... Even though rx-8's aren't known for being straight-line cars... I think a lot of people underestimate just how quick they really are when in the right gear
Not exactly a "kill" in my book... but hopefully there's a Z driver out there now with a little more respect for our 8's
So, my wife and I were going out to dinner the other night and after pulling onto Ladera I noticed that the guy behind me who was completely riding my **** started to gun it to go around me.
Well, I was in 2nd gear around 6k rpm so I punched it too... he stopped gaining ground on me when he was about even with my rear wheel. At that point I noticed it was a black 350Z which lives somewhere in the subdivision where I live.
After that, the guy didn't try to go around me any more even though he ended up following me all the way onto I-40, through the big-I onto I-25 until I exited at Montgomery... Even though rx-8's aren't known for being straight-line cars... I think a lot of people underestimate just how quick they really are when in the right gear
Not exactly a "kill" in my book... but hopefully there's a Z driver out there now with a little more respect for our 8's
#792
Good to know theres a few NM based RX-8 owners, and some that seem to be pretty serious about modding their cars. i just recently got rid of my Subaru Forester XT, and am enjoying the new RX-8 on some of the back roads in Southeastern NM. Dark canyon drive on the back side of Carlsbad is kinda rough asphalt, but man the RX8 just rails those corners!!
There used to be another RX8 hear in Artesia, but I haven't seen it for a long while. I did see a nice yellow RX8 several weeks back in Roswell so I know I am not alone. I spend two weeks in NM and then two weeks back in St.Louis. Gotta get the snows installed on my next trip back to avoid getting stranded somewhere on that 1000 mile road trip due to icy or snowy road conditions!
Jeff
There used to be another RX8 hear in Artesia, but I haven't seen it for a long while. I did see a nice yellow RX8 several weeks back in Roswell so I know I am not alone. I spend two weeks in NM and then two weeks back in St.Louis. Gotta get the snows installed on my next trip back to avoid getting stranded somewhere on that 1000 mile road trip due to icy or snowy road conditions!
Jeff
#793
Registered User
Join Date: Nov 2006
Location: Albuquerque, New Mexico
Posts: 50
Likes: 0
Received 0 Likes
on
0 Posts
Hey all, I just recently cracked my front bumper, and am looking for either a used replacement, or a nice looking body kit... Let me know what kits you think look good. I am not a big fan of body kits, so I'm really looking for a subtle kit and that seems to be hard to find. The MazdaSpeed front bumber seems alright, but if there are any others that aren't too wild, or if you know of someone who has a stock titanium gray bumper for sale, let me know. Thanks.
#794
Registered
Join Date: Oct 2005
Location: Moriarty, New Mexico
Posts: 202
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by BigAAA
Hey all, I just recently cracked my front bumper, and am looking for either a used replacement, or a nice looking body kit... Let me know what kits you think look good. I am not a big fan of body kits, so I'm really looking for a subtle kit and that seems to be hard to find. The MazdaSpeed front bumber seems alright, but if there are any others that aren't too wild, or if you know of someone who has a stock titanium gray bumper for sale, let me know. Thanks.
I like the look of racingbeat http://www.racingbeat.com/FRmazda4.htm
#796
Registered User
Join Date: Nov 2006
Location: Albuquerque, New Mexico
Posts: 50
Likes: 0
Received 0 Likes
on
0 Posts
I like the 1st racing beat nose, I might go that way. Anyone know how much it costs to paint that?
The mazdaspeed is also very nice, and it was the first one I was looking at. Does the mazdaspeed kit come with a new grille? That opening seems way too large for the stock grille. and I can't find it anywhere for less than 1200, ouch... since I just bought my car I don't want to spend that much... of course I should have thought of that before I hit someone, right...
The mazdaspeed is also very nice, and it was the first one I was looking at. Does the mazdaspeed kit come with a new grille? That opening seems way too large for the stock grille. and I can't find it anywhere for less than 1200, ouch... since I just bought my car I don't want to spend that much... of course I should have thought of that before I hit someone, right...
#798
Registered User
Join Date: Sep 2005
Location: Peralta
Posts: 246
Likes: 0
Received 0 Likes
on
0 Posts
I know I have not been around much lately , I have just been so busy with work and the daughters dance classes and all but I wanted to stop in and wish everyone a MERRY CHRISTMAS and a HAPPY NEW YEAR!!!