Yeah, I got the warranty thing with the DVD ( very entertaining :) ).
|
I live in sandy too, like 20th east and 90th south about, but im down in provo for school right now. I'm usually up there over the weekend though. I have a black one so hollar if you see me! lately ive been driving my bmw though cause it does better on gas!
|
Originally Posted by bose
(Post 2500219)
And to all, let's try to have a meet this weekend. How about it.
I was the only 8 at the SL Rotary meet on Saturday- where were all you guys? You missed your chance to see a 3-rotor engine. I couldn't stay for the BBQ, but met up with a couple of guys I first met nearly 30 years ago. We had first gen. RX-7's back then. Today was so nice I drove my 8 to work. It's not a daily driver, though, so tomorrow I'm back to the Explorer. |
Originally Posted by seriouscoin1
(Post 2500504)
You guys rcv. a warranty ext. in the mail? It says that the warranty is extended to 8 yrs. 100k miles. Let me know if you guys got that.
But it's not an extension of the entire engine and drivetrain warranty. The extension is for the engine core only. Meaning apex seals, really. |
4 Ounce Plastic Squeeze Bottles
These are perfect for pre-mix. One whole bottle is enough premix for exactly 1/2 tank. They have a pointed spout to make it easy to add the oil to your gas tank.
I'm premixing at half the recommended rate, so one whole bottle is what I add to a full tank. I have at least half a dozen of these, brand new, if any locals want them. First come, first served and I'll bring them to the next meet or cruise, or maybe I could meet you halfway somewhere if it's not too far. They are FREE |
Sorry I did not make it on Saturday, horrible hangover :( we should meet again soon, enjoy this short summer we are getting! GT LIVE is at the end of the month, lets get together with the rest of the local rotary owners and drive up there
|
Sorry folks, I won't be at GT LIVE. I got the days off work but it's our wedding anniversary- and my wife just isn't into cars at all. There's no way I can get away that weekend. Have fun, take pictures. :)
|
I have a BB too and I used to live in sandy. I know i saw at least one of you guys alot. usually near 106th and 13th. Mines the one with the black/chrome rims and a batman sticker. Sound familiar?
I might be able to meet up this weekend. I at 8pm though fri and sat...i think....have to check on that. |
I was in Texas over the weekend so I missed it, sounds like I missed a good one too, man that really grinds my gears.
Roxas, if you want I will come help you install that if you want other wise just pm me and I'll give you my number so you can call when you do need a pointer or whatever. Jethro I will take one of those bottles just bring it to the next meet. I have been looking but couldn't find one. I'm always driving around, darius what color is the 8 you see I go by 106 and 13th a couple times a day, I drive a SS with a loud exhaust. |
I saw a silver 8 yesterday that was going south on 13th E. and turned up 106th. I don't think he/she saw me though, was that you bose?
|
Depends on what time it was, but it was most likely me I went by there three times but it was after 6.
|
Well, it sounds like saturday is going to be best for us to meet.. Where should we meet and what time is good for you guys?
|
Originally Posted by bose
(Post 2503577)
Depends on what time it was, but it was most likely me I went by there three times but it was after 6.
|
Yeah, It musta been me I had just washed it. and then it rains today always happens. Washing it again tomorrow.
Saturday I can meet anytime, maybe somewhere in Murray, central location for most I assume. Maybe grab some food and go on a cruise. |
yup, gotta wash mine again :) I would rather meet early. Have you clogged your arteries on a baconator from McDonalds?
|
McDonald's has a baconator too. I've had the Wendy's baconater and holy shit that's alot of grease.
|
oops, I meant Wendy's. Yeah, lots of grease :) There was a silver 8 last night at century 16 that raced a little with me down 215, anyone?
|
wasn't me. So who's down for a meet tomorrow? Anyone going to the drag races at RMR tonight?
|
Oh, I forgot about RMR.. We should meet and then head over there. I can pretty much meet up anytime tomorrow
|
I'm down to meet before hand. I'll be down in Riverton about 119th s. and 9th w.
|
Usually the 8's I see in sandy are BB like mine. Besides I've seen your car Bose, I'd know it if I saw it ;). I'd love o go to the drags tonight but I work :( I could do soemthing during the day tomorrow tohugh. I work at 8pm.
|
So who is up for a meet today?
|
yeah im thinking we really need to do just set a date thats a decent way in the future so we dont keep doing this last minute scramble thing. That way every can be prepared and everyone can make it.
|
GT LIVE!!! June 28-29, at Miller we need to show up in force.
|
Sorry guys, me and the Mrs. will be in Wendover that weekend, celebrating our 21st wedding anniversary.
Have fun at Miller without me. At least I'll have my 8 with me in 'dover. :) |
Hey guys!!! Sugarhouse Driver here
Hey, Just thought i would join up, Im currently an active member in RME which is more well know at RMR. . . I have a 04 RX8 with a few mods on it. . Charcoal gray with 80 K Would love to meet up with you guys and go for a cruize or what not. . . Last weekend i went to the Bountiful car show, Funny enough I won the Top Tuner award. . We should get alot of us together and have my group and alot of you guys go on a big drive like the Alpine canyon or what not . . PM me for my number for more details . . RME stands for rockymountainecotec but its open to everyone not just Ecotecs lol! :spank:
|
Nice to see you've found our little cult. What to you have done to your car?
I'm always up for a meet or whatever. I live in Sandy have a Silver 04 with a couple mods. If you have any questions about the car or whatever post'em up. Next weekend is GT Live @ Miller. |
Mods
I just have Intake, Stage 2 clutch, and Upgraded Limited Slip (2 way) diff. Ive only had it for 3 months so. . . we will see whats to come next. I am saving now for a Veilside full body kit. . and once i roll over to 100 k i will go with the STS twin turbo setup. . . But I thought GT was on the 28-29 i was talking about this sunday the 22nd. . . .
|
Originally Posted by 04rx8gr
(Post 2513997)
I just have Intake, Stage 2 clutch, and Upgraded Limited Slip (2 way) diff. Ive only had it for 3 months so. . . we will see whats to come next. I am saving now for a Veilside full body kit. . and once i roll over to 100 k i will go with the STS twin turbo setup. . . But I thought GT was on the 28-29 i was talking about this sunday the 22nd. . . .
Funny you mention a new differential. I just read that on the '09's, Mazda has changed the differential ratio to help accelleration. I wonder if you could swap-out an old ring and pinion for the new set? I may be up for a get-together this weekend. Even if we don't cruise we could meet for coffee or something. |
diff
Id imagine you could swap theres not much to them. . . . and yes it does drasticly help :)
|
Originally Posted by 04rx8gr
(Post 2514100)
Id imagine you could swap theres not much to them. . . . and yes it does drasticly help :)
I guess if the '09 RX-8 is identical in all other respects, it would be a straight swap in our cars. But pricey. It's also critical to get them installed perfectly. If the gear mesh isn't just right, the gears will "sing" as you drive. The faster you drive, the louder the noise. This indicates excessive wear- and that accoustical energy also means heat is being generated, and a small amount of power loss. |
hmm
Yea . . .it would prob be way pricey from them!
|
Yeah I meant weekend after next, it is the 28-29th. But this weekend gonna be great weather maybe we could meet saturday during the day and go to Molly Greens and grab a beer and a bite? It will be a great drive, anyone?
|
Ugh. . .
I have my car show in southern utah fri and sat so sun is my only available day. .. haha and No bueno on the Beer!!! haha Im only 19 and dont have a fake id. . .
|
Ah yes that could be a problem, damn youngin's. :lol2: Oh well we should grab a bite somewhere else then do a canyon run is all I'm sayin.
|
HEy
lol,, , But ya it should be a decent run .. sounds so far like there should be alot of people going. We were thinking meet up around 2 or 230 then take the run. .. ( dont worry we can eat sometime in there haha):lol2:
|
I just went canyon carving up east canyon with my buddy in his S2000. That was a blast. East canyon looks like friggin Scotland from the top right now.
|
Sweet, is your buddie s2k yellow? I got beat up big cottonwood by one a couple months ago, bloody things are light and quick.
Saturday around 2? works for me, don't really care if/when we eat just somthing to do. I'm more for the driving anyways. 04rx8gr-did you do the limited slip and clutch yourself? I want to swap final drives but don't want to deal with outrageous labor costs. |
yea
I do all my own work. . . . :) paying someone is useless! :):bootyshak
|
Nice, my sentiments exactly. My only problem is I don't have all the know how...yet. I'm looking at two swaps currently may need to employ your knowledge, if you don't mind.
|
I disagree, gents.
My time is a lot more valuable than a mechanic's shop rate. Additonally, I always choose someone who offers some kind of guarantee in the event of a problem. Thirdly, I won't put myself into a possible warranty voiding situation with a car this new. If I wanted a new differential gearing, for example, I'd buy Mazda and have Mazda put it in, thus preserving my warranty. I've had my car 15 months, and still only have 5800 miles on it. I'm going to take the warranty to the limit on time, not mileage. I paid a lot of money for an extended warranty- 8 years, 100,000 miles, for EVERYTHING- not just the "engine core" warranty extension. So if I get the urge to mod it before then, it's going to be with Mazdaspeed parts, at a Mazda dealership. Mike, I know you are down on dealership service, but you just admitted yourself that you lack the experience. What are your options if you massively screw something up that you did yourself? "Joe Rotary" who owns two RX-7's and has been doing it for years might be willing to help you drop something in, but is he willing to buy a replacement for you when the first one blows-up? |
haha well
Some of our cars dont have that low of miles like mine haha i have 80 K so i really dont care haha Plus i have my 2yr degree in automotive repair :) But more power to you . . I bought my car to mod the heck outta it not just drive it :)
|
Oh, I understand. When I was your age, I spent a lot of time upgrading my car, too. And it was fun then, I have to admit it.
People change as they get older. Probably only one in a hundred of the young people who like to work on their cars will still be enthusiastic about it when they turn 50. You'll see, your priorities might change, too. My next-door neighbor is a professional mechanic. Makes good money at it, too. But he refuses to work on cars on his own time now, won't do it at ALL, lol. Pisses him off to have to even put a new set of plugs in his engine. Says he'd rather be in his boat, on the lake. He doesn't even own a car, just an F350 pickup that he only uses to tow his fifth-wheel and boat around. He never drives that truck for anything else. Seven years old and still looks brand new. Out of curiosity, how many hours did you spend studying the rotary engine in your 2-year program? Was it local? SLCC? |
Yeah, I may not have all the know how yet, but I will in time and at this point Chuck I have no choice anyways, I have NO warranty so if ANYTHING breaks I'm on my own anyways. And I don't wanna pay for Mazda parts=twice the cost.
So to each their own. If I had a warranty I may feel differently but...:icon_no2: |
Hmm
actually studied 6 months in class and then just everyday learning more things as i go on :) But hey I need to know whos all going so we dont leave anyone behind on Sunday, We are going to meet at 2:00 PM at Sugarhouse Park, If you dont know where that is ask for :eyetwitch Directions I NEED A HEAD COUNT !!
|
Im in for Sunday @2. Sugarhouse Park...check. Did you go to SLCC? Or somwhere else?
|
No,
Went to Snow collage Richfield! haha
|
Sweet, I'm starting my two year program this fall at SLCC.
So is anyone else coming to them meet.? |
hmmm. . .
No one seems to be responding. . . maybe we can just meet up and go grab coffee or some shit. . . haha
|
i live 2 feet away from sugarhouse park. I'm down with a 2 o' clock meet on sunday;) Oh and no my friends S2k is red.
|
All times are GMT -5. The time now is 03:49 PM. |
© 2024 MH Sub I, LLC dba Internet Brands