C Ya L8r

Anybody happen to have a flywheel stop and alignment tool I can rent, borrow or buy? possibly a used clutch disk? I had a chunk fall out of mine but the flywheel and pressure plate look good. I only have 27k on it and dot feel like replacing it all right now.

Schartz

iTrader: (6)

Would anyone be interested in meeting way up north duluth/Superior area this summer... Canal park is a hot spot for cars at night. & theres a few others spots we could cruise to. Could be a fun meet Heres my cell if anyone wants to throw me a text 715-817-0662

Kaiser bun

iTrader: (2)

gawd, i wanna go up to deluth in the summer for once, was at silver bay a couple years in a row for hockey tourneys in the winter, but never been there when there was less then 5 feet of snow lol

TonyVS12385

So we got a count for June 19th or what?

Schartz

iTrader: (6)

For sure

Groo

Any suggestions on where to get some performance brake pads in the cities on short notice (and on a weekend)? I found two stores that carry Hawks but they are closed on the weekends. O'reilly's & Pep Boys claim they carry EBCs but the local warehouse doesn't have any.

Or, anyone have some decent pads laying around they want to get rid of?

Pstone

iTrader: (4)

The NAPA distribution warehouse for all of the metro is a couple blocks from my house. They're open some late hours, I would probably check them out.

ganseg

iTrader: (5)

Depends on how performance oriented you mean. I have a set of track pads - Carbotech XP10s but would need $160 (all four corners, used twice). I'll PM my cell . I am in Maple Grove.

Groo

Thanks, I called NAPA but they couldn't do anything until Monday.

Gary really helped out- ALMOST got me to BIR on Monday. I had some other things come up and had to postpone. :-/

On the plus side I have plenty of time to get some new pads lined up- anyone have a recommendation for a good street pad with occasional track/autox use?

Shnifty

I won't be able to come anymore, I have to work

boarderjosh10

iTrader: (2)

I'll go to the june 19th meet, where is it going to be?

TonyVS12385

Thats the issue.. we don't have a head count.... have no clue where we are going. Grill out at a park?

neim0003

I thought people had said Fuddruckers? Either way I'm looking forward to it

Nouvellion

I'd be happy to meet up if we're not too far out of the cities.

TonyVS12385

Yeah, we did decide that. either way sounds good. i think a park somewhere would be nice, that way we are not inside and away from our cars
also weather pending...

TonyVS12385

I think most people are actually in the cities, i know a few of you are far out there... I know C ya L8r has a grenaded clutch.... are ya gonna fix that in time?

boarderjosh10

iTrader: (2)

I thought fuddruckers was where the last meet was? I didn't go to it so I dont really mind if I ended up there on the 19th, but I think an outside park meet might be the best. I am in Wayzata, west of the cities so if anyone wants to be out that way that would be cool but I'll go where ever; I don't mind driving :-) so whoever is doing the head count they can count me in.

C Ya L8r

I better have it fixed by then. Its ben two weeks since I orderd my clutch from clutchflywheel.com who then ordered it from THMotorsports.com who then ordered it from ACT and they are now making it. Apparently a modified street disk (stage 1) is a special order item????
I called the day after I ordered it to have them send a alignment tool and I was told my order had allready shipped. Now they are sending me the tool for free due to the delay.

TonyVS12385

thats a nice headache.... i hate some vendors. why do you have to order and order then order again? parts could be soooooo much cheaper if we could 1, order directly form manufacturer (some let you) and 2, a vendor ordering directly for you!! boggles my mind..

and i just had a situation on ordering rotora rotors, they shipped me the rotors and the front brakes, but didn't send the rear brakes because they never placed the order.. basically 3 weeks worth of waiting... got everything. went to chris's house... 2.5 hours onf removing front rotor cause of factory screws... wrong size! they sent me ones for auto trans... apparently they dont have sport suspension... now waiting again... but they were nice, waived all shipping and accepted a return pass their 30days.

Thompsolonian

OK, here is the deal, I would like a PM or a text or an email, by next Tuesday!

Email thompsolonian@gmail.com
Cell 651-408-3317

I think a park is a good idea, once I get a head count I can figure out who can bring what, i think potluck styke grill out would work, I'm looking into parks now.


If we don't wanna do that, we could always go to fudruckers...I'll call ahead as a courtesy to let them know...

I got my Dad interested in going, but he has a 350Z...hope you don't mind.

MadeULook

Just count me in. It's been looking gloomy outside this whole week. Lets hope the 19th turns out better. My brother might be joining us with his Speed 6.

wolf50000

Hey guys,

Alright, I've owned my RX8 for over a year, and I've owned my 93 third gen RX7 for over six years. These two cars are my passion. However, I have one other passion: martial arts. I've been doing martial arts my whole life. I have decided to start my own martial arts school in Burnsville, MN. If you are interested, or you just want to come and compare rx8's (hahaa) give me a call at 952 297 6347. My name is Ryan, and here is my website:

http://www.wuchifightingarts.com/

This is the real deal! Hope to you see you soon. Or just call and we'll talk rx8's!Hahaa

Ryan

Nouvellion

Any updates on this? Still looking forward to a park grillout next saturday. Any guesstimates on numbers?

Thompsolonian

I only have 3 people who PM'd me so far
turnout may be only 4 people...

TonyVS12385

i am down... possibly chris? with the red shinka.