Originally Posted by truemagellen
from what we can remember there are only 3 Sunlight Silver RX-8s in the state of MN you'll be the 4th :) (Ted, 4yrs to supercharge is the second, and a guy a mile from me is the third)
|
probably Ted (4yrs to supercharge) :)
|
Originally Posted by Speedrx8er
Got two free 12" Fosgate + amp. How and where do I Mount this bastard????
there is a good chance I will tell you to only use one sub btw :) |
Originally Posted by Bad_Karma_RX8
I am in the process of getting back to Minnesota. I'll either be in Minneapolis or back down in Owatonna. I have a Sunlight Silver RX-8, which has been bathed in the Hawaiian sun for about a year now. I look foward to getting back stateside and hopefully meeting some of you fellow 8 owners.
So how common are the 8's back in Minnesota. They are a dime a dozen on the island. The 3 local dealers usually are sold out before cars even arrive. However this is the only car i have owned that i truly love driving. Jim |
Originally Posted by Groo
I just saw a silver one two nights ago going up 77. I was in my minivan of course lol.
I drove up to Princeton on Saturday. |
Right at about 20,000 population wise
|
Originally Posted by truemagellen
what is the RMS of each sub and specs of the amp?
there is a good chance I will tell you to only use one sub btw :) RMS = 200 AMP Spec: 50X4 watts RMS continuous power into 4 Ohms with less than .05% THD from 20-20 KHz. 100X4 Watts RMS continuous power into 2 Ohms with less than .10% THD from 20-20KHz |
what Ohm is each sub?
|
Originally Posted by truemagellen
what Ohm is each sub?
|
I got a quote from local body shop and custom paint shop to paint and install my kit for my 8. Right at about $1,100 for painting, installation, labor, and materials. That covers the front and rear bumper replacement, side skirts and spoiler.
|
Originally Posted by Speedrx8er
Ohm = 7.3
are you sure those aren't home audio speakers? |
Originally Posted by Bad_Karma_RX8
I got a quote from local body shop and custom paint shop to paint and install my kit for my 8. Right at about $1,100 for painting, installation, labor, and materials. That covers the front and rear bumper replacement, side skirts and spoiler.
everything is more expensive in Hawaii I've heard looking forward to pics :) |
$1,100 plus 10% military discount. Yeah they agreed to trim and fit it perfectly.
|
Originally Posted by Speedrx8er
Got two free 12" Fosgate + amp. How and where do I Mount this bastard????
Mount it in the sink part of the trunk and build a false wall with a fan to cool intake and exhaust the heat produced by pushing that massive inefficient Rockford heatsink. :djcelebra |
Originally Posted by truemagellen
WTF?
are you sure those aren't home audio speakers? is the fosgate punch xlc 2812 |
Originally Posted by 4 years to Supercharge
Mount it in the sink part of the trunk and build a false wall with a fan to cool intake and exhaust the heat produced by pushing that massive inefficient Rockford heatsink.
:djcelebra |
ted if speed's sub is 7.3ohm home sub does he need to be very careful when running power to it or is this not going to happen?
me=clueless on this one |
Depends on if you want to totally drown out your Greddy ;)
The datasheet on these subs is here: http://www.rockfordfosgate.com/libra...12_2812-ts.pdf Manual is here: http://www.rockfordfosgate.com/libra...oofers-man.pdf Truthfully one would be plenty, but then I used to have a 15" HiFonics Generation X DVC in my Neon. That system could hit 145db. Talk about overkill. |
recheck the the sub.. its 8 ohm
|
save weight with one :)
|
Originally Posted by truemagellen
ted if speed's sub is 7.3ohm home sub does he need to be very careful when running power to it or is this not going to happen?
me=clueless on this one Those XLCs come in 4 or 8 Ohm Champa should be fine running both of them off his amp because it is actually an 8 Ohm that he has. |
If I put both in the sink in area. How high must it be off the floor?? (dia)
|
I installed LEDs last night.
Brake lights are just as bright as the stock bulbs. Flashers are bright but don't reflect off the chrome as much as the stocks. Did the load resistors for the flashers too. |
Originally Posted by Speedrx8er
If I put both in the sink in area. How high must it be off the floor?? (dia)
I was referring to the amp but you may not want it showing. Stealth is king most of the time. I am going to get rid of the sink and install the amp under the false floor. A box is the easiest unless you want to fabricate them into the corners. I would have but I golf. You may have seen this before: http://www.the12volt.com/installbay/...TID=56902&PN=1 |
Cool thanks!!!! off to home depot
|
All times are GMT -5. The time now is 03:33 PM. |
© 2024 MH Sub I, LLC dba Internet Brands