Official Chicago/MW Dyno Day
#52
no agenda
iTrader: (2)
So where is everyone staying?
I was hoping to stay right downtown, maybe on the Mag Mile or over on State by the HOB and ESPN Zone.
Chicago is my favorite North American city so this weekend will be like a mini holiday. However I am aware the Plainfield is about an hour from the core.
Recommendations?
Ray, I too would like to see your coil upgrade kit at this meet. <just saying>
As a matter of fact it would be easier for me to get anything I can from your product line and bring it home with me instead of having to ship it.
- Put me down for comp test (this test frightens me)
- Is it possible to convert me over to direct port with a couple of BHR Nozzles? Or the TB Plate for Nitrous (likely could do the latter at home)
- BHR ignition-controller module for nitrous use
- Would like to have a midpipe in place for MM to tune against, however I am at a total loss about which product to get. I've heard that many burn out in short order. Ray any chance you could spec me a midpipe? I'll buy it and ship it to your address.
What I would like to bring home with me but not necessarily install at the meet.
- BHR box aluminum dead-pedal with dimpled plate grip surface.
- Clutch pedal reinforcement
- CRH and MM bobble head
One last thing, I think my throw out bearing is going. This type of item is cheap and easy to get. I was wondering if you could do a health and wellness test on my clutch setup, and hopefully be able to fix the problem.
Oh and Ray would you bring a tank of N20 that doesn't leak, Thanks man![Wink](https://www.rx8club.com/images/smilies/wink.gif)
I'm not comfortable trying to bring my tank across the border.
I was hoping to stay right downtown, maybe on the Mag Mile or over on State by the HOB and ESPN Zone.
Chicago is my favorite North American city so this weekend will be like a mini holiday. However I am aware the Plainfield is about an hour from the core.
Recommendations?
Ray, I too would like to see your coil upgrade kit at this meet. <just saying>
As a matter of fact it would be easier for me to get anything I can from your product line and bring it home with me instead of having to ship it.
- Put me down for comp test (this test frightens me)
- Is it possible to convert me over to direct port with a couple of BHR Nozzles? Or the TB Plate for Nitrous (likely could do the latter at home)
- BHR ignition-controller module for nitrous use
- Would like to have a midpipe in place for MM to tune against, however I am at a total loss about which product to get. I've heard that many burn out in short order. Ray any chance you could spec me a midpipe? I'll buy it and ship it to your address.
What I would like to bring home with me but not necessarily install at the meet.
- BHR box aluminum dead-pedal with dimpled plate grip surface.
- Clutch pedal reinforcement
- CRH and MM bobble head
One last thing, I think my throw out bearing is going. This type of item is cheap and easy to get. I was wondering if you could do a health and wellness test on my clutch setup, and hopefully be able to fix the problem.
Oh and Ray would you bring a tank of N20 that doesn't leak, Thanks man
![Wink](https://www.rx8club.com/images/smilies/wink.gif)
I'm not comfortable trying to bring my tank across the border.
#53
Finally Boosted!!!!!!!
Thread Starter
It sounds like there are people who want Ray to install some different things. Just remember that we have a limited amount of time for the dyno and we want to get as many cars tuned on the dyno as we can while we have it.
If you want something installed work with Ray and myself but if the mod doesn't make any difference to the tune on the dyno he may not be able to install everything on Saturday.
If you want something installed work with Ray and myself but if the mod doesn't make any difference to the tune on the dyno he may not be able to install everything on Saturday.
#55
Finally Boosted!!!!!!!
Thread Starter
WCS - You will be one of the later cars on the dyno so it shouldn't make that big of a difference for you.
I'm pretty sure Ray will be in town Friday, Saturday, and Sunday. Over that period of time he should be able to install anything that anybody needs help with. He just might not be able to install everything before everyone gets on the dyno.
I'm pretty sure Ray will be in town Friday, Saturday, and Sunday. Over that period of time he should be able to install anything that anybody needs help with. He just might not be able to install everything before everyone gets on the dyno.
#56
Registered
Join Date: Sep 2006
Location: Madison, WI
Posts: 1,202
Likes: 0
Received 0 Likes
on
0 Posts
Any responce to above?
#58
Registered
Join Date: Sep 2006
Location: Madison, WI
Posts: 1,202
Likes: 0
Received 0 Likes
on
0 Posts
I guess my other question is are you tuning our vehicles for max HP while keeping reliability? I'm not to concerned with MPG or cat life. Not sure if you'll have time to set up each vehicle with two maps, meaning one for daily use (good MPG) and one for track use (the hell with MPG and cat life). I wouldn't mind running the more aggressive map all the time since my daily commute is less then 20 miles. Looking forward to this
![Evil Laughter](https://www.rx8club.com/images/smilies/evil_laughter.gif)
Last edited by devildog1679; 05-12-2008 at 11:39 AM.
#60
Legend in the making
Join Date: Jul 2007
Location: Chicago/Joliet, Illinois
Posts: 187
Likes: 0
Received 0 Likes
on
0 Posts
Ok....we need to start an official list of who is going to be doing the dyno runs. I will be going to Perfromance sometime this week to pick up my car......
So, Tdiddy, do you have a list ? Or should you just make a new thread for a list? I would like to give dave a heads up and an idea of what to expect. It looks like a lot of people will at least be coming out to watch too.
So, Tdiddy, do you have a list ? Or should you just make a new thread for a list? I would like to give dave a heads up and an idea of what to expect. It looks like a lot of people will at least be coming out to watch too.
#61
Registered
iTrader: (3)
Join Date: Aug 2004
Location: chicago
Posts: 436
Likes: 0
Received 0 Likes
on
0 Posts
I think this is the list so far, from page one
The List
1. lilring - dyno only
2. Macius8 - dyno only
3. Devildog1679- AP
4. luis_o_98 - AP
5. cheeto - AP
6. ARRxATE - AP
7. wcs - FI, AP
8. steven000e - FI, AP
9. tdiddy - FI, AP
10. importshowoff - FI, Int-X
The List
1. lilring - dyno only
2. Macius8 - dyno only
3. Devildog1679- AP
4. luis_o_98 - AP
5. cheeto - AP
6. ARRxATE - AP
7. wcs - FI, AP
8. steven000e - FI, AP
9. tdiddy - FI, AP
10. importshowoff - FI, Int-X
#65
Finally Boosted!!!!!!!
Thread Starter
I would like to see us add a couple more cars to the list. Even if those cars are not 8s. I think we have time and it will make it cheaper for the dyno. Anybody got any friends that want to do a couple dyno pulls?
#66
Registered
Join Date: Sep 2006
Location: Madison, WI
Posts: 1,202
Likes: 0
Received 0 Likes
on
0 Posts
You have a PM
#70
Registered
Join Date: Sep 2006
Location: Madison, WI
Posts: 1,202
Likes: 0
Received 0 Likes
on
0 Posts
MM is right I, 10 cars will give each one about 45 minutes. Though some are only Dynoing a sweet spot will be b/w 10 and 13 I believe. At the same time it will help to have some back-up cars in case some people drop out at the last minute.
#71
Finally Boosted!!!!!!!
Thread Starter
I would like to have 10-12 cars on the list. Roughly 4 dyno only, 4 N/A AccessPORT, and 4 FI cars. This should balance the costs with the time.
I will be the last car on the dyno and I will pay for my dyno and tuning time whether I get it or not. All I really care about is getting my car running again. It doesn't matter to me if MM or CRH can do that in the parking lot, on the street, or on the dyno. As long as I can drive my car again after that weekend!!!
I will be the last car on the dyno and I will pay for my dyno and tuning time whether I get it or not. All I really care about is getting my car running again. It doesn't matter to me if MM or CRH can do that in the parking lot, on the street, or on the dyno. As long as I can drive my car again after that weekend!!!
#72
Finally Boosted!!!!!!!
Thread Starter
Every day for the last 7 months I have had to come home and see my car setting there in the garage on jackstands. I die a little bit each time.
![Crying](https://www.rx8club.com/images/smilies/crying.gif)
#74
Legend in the making
Join Date: Jul 2007
Location: Chicago/Joliet, Illinois
Posts: 187
Likes: 0
Received 0 Likes
on
0 Posts
Ok....I am 99% positive I will have a semi-built B18 swap in an integra with a turbo wanting a tune. Will this be possible? Or should I have Performance do his tune that day?