Akron/Cleveland 8 Owners.
#3651
The devil made me do it
iTrader: (1)
Join Date: Jul 2007
Location: Colorado Springs, CO
Posts: 3,708
Likes: 0
Received 2 Likes
on
2 Posts
was Park Mazda on S. Arlington. Never had an issue with them in the past. Keep in mind, this was someone working "the counter" and probably not an actual tech i spoke with... and more than likely not someone who knows anything about the RX8. Careful to not judge an entire venue based on one retard... especially in regards to the 8. Not many know a whole lot about it. Not being your typical car, i know some are intimidated by it and simply rather not learn anything about it.
Guess that's why we love the damn things. Because it's so unique.
Anyway, i took what he had to say with a grain of salt
Guess that's why we love the damn things. Because it's so unique.
Anyway, i took what he had to say with a grain of salt
#3654
SHKWAV
#3658
It's Not Easy Being Green
iTrader: (1)
Join Date: Apr 2008
Location: Akron, OH
Posts: 1,846
Likes: 0
Received 0 Likes
on
0 Posts
Hey Jon. Any idea where the best place is to install a water temp adapter along the 35mm hose? Apparantly the adapter I've got is the right size it just doesn't install where the RB Adapter goes.
I don't know where the OEM sensor is at but apparantly that's the best place. Should be post-engine travel so it would give me the highest temps.
Here's a decent pic of an engine bay to work with...
![](http://www.turborx8.ca/pictures/engine.jpg)
I've been trolling through the forums looking for any pic of a non-RB water adapter installed and there just isn't one. Annoying.
I don't know where the OEM sensor is at but apparantly that's the best place. Should be post-engine travel so it would give me the highest temps.
Here's a decent pic of an engine bay to work with...
![](http://www.turborx8.ca/pictures/engine.jpg)
I've been trolling through the forums looking for any pic of a non-RB water adapter installed and there just isn't one. Annoying.
#3660
It's Not Easy Being Green
iTrader: (1)
Join Date: Apr 2008
Location: Akron, OH
Posts: 1,846
Likes: 0
Received 0 Likes
on
0 Posts
![](https://www.rx8club.com/attachments/ne-rx-8-forum-29/133026d1233611903-akron-cleveland-8-owners-rb_install.jpg)
Here's my adapter:
![](https://www.rx8club.com/attachments/ne-rx-8-forum-29/133028d1233612268-akron-cleveland-8-owners-megan_adapter.jpg)
and here's the RB adapter:
![](https://www.rx8club.com/attachments/ne-rx-8-forum-29/133027d1233612268-akron-cleveland-8-owners-rb_adapter.gif)
Last edited by RK; 02-02-2009 at 04:05 PM.
#3662
It's Not Easy Being Green
iTrader: (1)
Join Date: Apr 2008
Location: Akron, OH
Posts: 1,846
Likes: 0
Received 0 Likes
on
0 Posts
No biggie. I only glanced at it on Sunday and didn't try to trace the coolant line to figure out if there's piping that works for this. Also failed to measure the adapter to make sure it's the right size (34mm or 36mm) from what people have discussed. Apparantly the hoses being used are 35mm.
Can't believe no one has a pic of their non-RB adapter. If you don't know of a good place offhand I'll post something in a big forum or ask Brice.
Can't believe no one has a pic of their non-RB adapter. If you don't know of a good place offhand I'll post something in a big forum or ask Brice.
#3663
"13B vs. Renesis" Discuss
iTrader: (28)
Howdy Folks.
Jeeze, you leave your computer one weekend - Reported off of work today because I spent most of the day "incapacitated" due to some Wasabi Ranch wings during the super bowl.
Anyway - John: I have the RB cat back. Gave a nice sound with the stock cat - however, I have never had the stock exhaust on the car... but honestly, all of my Racing Beat stuff has worked really well. I have no desire to change any of it even though I didn't put any of it on. If anything, I messed it up by installing a craptastic midpipe.
I am really thinking about the RB dual resonated pipe when it comes out.
...or just spend
Jon: I have class wednesday and thursday night. Friday would work best for CPD (clutch pedal delivery)
Ryan I have the RB adapter - I didn't read your post closely enough to know what you need.
Autoshow... want to finalize some dates? I am open to anything really... I just want to go.
Jeeze, you leave your computer one weekend - Reported off of work today because I spent most of the day "incapacitated" due to some Wasabi Ranch wings during the super bowl.
Anyway - John: I have the RB cat back. Gave a nice sound with the stock cat - however, I have never had the stock exhaust on the car... but honestly, all of my Racing Beat stuff has worked really well. I have no desire to change any of it even though I didn't put any of it on. If anything, I messed it up by installing a craptastic midpipe.
I am really thinking about the RB dual resonated pipe when it comes out.
...or just spend
Jon: I have class wednesday and thursday night. Friday would work best for CPD (clutch pedal delivery)
Ryan I have the RB adapter - I didn't read your post closely enough to know what you need.
Autoshow... want to finalize some dates? I am open to anything really... I just want to go.
#3664
It's Not Easy Being Green
iTrader: (1)
Join Date: Apr 2008
Location: Akron, OH
Posts: 1,846
Likes: 0
Received 0 Likes
on
0 Posts
![Smilie](https://www.rx8club.com/images/smilies/smile.gif)
Autoshow... want to finalize some dates? I am open to anything really... I just want to go.
#3665
"13B vs. Renesis" Discuss
iTrader: (28)
Put it where it fits and where it is going to work. Duh.
March 7th for the Autoshow works the best for me. The 8th would work also... but it is the last day so it could be crowded,.... but that is also the day they give away a free dodge ram or something.
March 7th for the Autoshow works the best for me. The 8th would work also... but it is the last day so it could be crowded,.... but that is also the day they give away a free dodge ram or something.
#3667
Grasshopper
iTrader: (1)
Ryan,
Well... I don't understand why the RB has their adapter after the heater core (unless it was for convenience).
I would think you would want the adapter on the heat hose (coming out of the engine) before the heater core since some heat will be lost in the core and not be as accurate for measuring water temp near the engine.
Well... I don't understand why the RB has their adapter after the heater core (unless it was for convenience).
I would think you would want the adapter on the heat hose (coming out of the engine) before the heater core since some heat will be lost in the core and not be as accurate for measuring water temp near the engine.
![Akron/Cleveland 8 Owners.-heat-hose.jpg](https://www.rx8club.com/attachments/ne-rx-8-forum-29/133052d1233625079t-akron-cleveland-8-owners-heat-hose.jpg)
Last edited by Jon316G; 02-02-2009 at 07:40 PM.
#3670
"13B vs. Renesis" Discuss
iTrader: (28)
Banned... you can drop yours off at the shop any day this week between 7-4 and I'll get it. The shop is probably closer to you than my apt.
Shop Address:
CnD Industries
4520 Southway st SW
Canton, OH 44706
(From rt 21:
route 30 east to Raff Rd exit. Left at the bottom of the ramp, left on to southway st. 3rd building on the left)
Jon: you can drop them off at my house friday night. (about 20 min closer) Make sure that they're labeled. Don't want mix them up as John said.
I'll get to them next week. I'm not responsible for lost or damaged clutch pedals.
In other news, check out my group buy on the forums for welded clutch pedals!
Shop Address:
CnD Industries
4520 Southway st SW
Canton, OH 44706
(From rt 21:
route 30 east to Raff Rd exit. Left at the bottom of the ramp, left on to southway st. 3rd building on the left)
Jon: you can drop them off at my house friday night. (about 20 min closer) Make sure that they're labeled. Don't want mix them up as John said.
I'll get to them next week. I'm not responsible for lost or damaged clutch pedals.
In other news, check out my group buy on the forums for welded clutch pedals!
#3671
It's Not Easy Being Green
iTrader: (1)
Join Date: Apr 2008
Location: Akron, OH
Posts: 1,846
Likes: 0
Received 0 Likes
on
0 Posts
CnD Industries
4520 Southway st SW
Canton, OH 44706
#3673
It's Not Easy Being Green
iTrader: (1)
Join Date: Apr 2008
Location: Akron, OH
Posts: 1,846
Likes: 0
Received 0 Likes
on
0 Posts
Too late. I'll be looking for it.
BTW my clutch is not labeled by anything other than my unique handiwork. I got it out w/o effing with that silly little clip.
Course I may not be able to get it back in but that's something I'll worry about in a few weeks.
BTW my clutch is not labeled by anything other than my unique handiwork. I got it out w/o effing with that silly little clip.
Course I may not be able to get it back in but that's something I'll worry about in a few weeks.
![Smilie](https://www.rx8club.com/images/smilies/smile.gif)
#3674
It's Not Easy Being Green
iTrader: (1)
Join Date: Apr 2008
Location: Akron, OH
Posts: 1,846
Likes: 0
Received 0 Likes
on
0 Posts
Ryan,
Well... I don't understand why the RB has their adapter after the heater core (unless it was for convenience).
I would think you would want the adapter on the heat hose (coming out of the engine) before the heater core since some heat will be lost in the core and not be as accurate for measuring water temp near the engine.
Attachment 133052
Well... I don't understand why the RB has their adapter after the heater core (unless it was for convenience).
I would think you would want the adapter on the heat hose (coming out of the engine) before the heater core since some heat will be lost in the core and not be as accurate for measuring water temp near the engine.
Attachment 133052
Here's mysql's big red hoses:
https://www.rx8club.com/attachment.p...4&d=1209260393
I'll have to pull off my battery case and drain my coolant but I'm changing the latter anyway. Gonna have to wait until I get my clutch back before I do anything.
#3675
It's Not Easy Being Green
iTrader: (1)
Join Date: Apr 2008
Location: Akron, OH
Posts: 1,846
Likes: 0
Received 0 Likes
on
0 Posts
I'm apparantly in full post ***** mode today. Anyway potentially new item on the market:
https://www.rx8club.com/showthread.p...=1#post2849072
I'm thinking of taking up a collection to buy this and then have a 'compression test' meet sometime in the spring where everyone can test out their engine compression. Mazda charges $100+ for a test although I believe you get reimbursed if your engine is bad.
https://www.rx8club.com/showthread.p...=1#post2849072
I'm thinking of taking up a collection to buy this and then have a 'compression test' meet sometime in the spring where everyone can test out their engine compression. Mazda charges $100+ for a test although I believe you get reimbursed if your engine is bad.