Akron/Cleveland 8 Owners.
#428
Grasshopper
iTrader: (1)
Hey doc... I just wanted to verify that you received the VFAD and the fresh air duct (the pipe that runs behind your bumper).
Don't want you to go through all the trouble just to find out that you don't have what is required to utilize the airbox.
And FYI... the VFAD air line goes to a nipple that hangs down from the intake manifold... just after the throttle body. There should be a plug that was installed for the aftermarket intake.
Good luck!
Don't want you to go through all the trouble just to find out that you don't have what is required to utilize the airbox.
And FYI... the VFAD air line goes to a nipple that hangs down from the intake manifold... just after the throttle body. There should be a plug that was installed for the aftermarket intake.
Good luck!
#429
TeethNThings.com
iTrader: (10)
Join Date: Mar 2008
Location: Mere seconds behind the leader...Doh!
Posts: 1,322
Likes: 0
Received 0 Likes
on
0 Posts
Thanks for the warning. I'll look for that.
I'll lay it all out and compare the other car to be sure I've got all the pieces parts. The guy I bought it from said it was all there. but we know how that goes......
I'll lay it all out and compare the other car to be sure I've got all the pieces parts. The guy I bought it from said it was all there. but we know how that goes......
#432
TeethNThings.com
iTrader: (10)
Join Date: Mar 2008
Location: Mere seconds behind the leader...Doh!
Posts: 1,322
Likes: 0
Received 0 Likes
on
0 Posts
OK, guys. I opened the box. It appears everything is there, but one of the places where the hoses attach is broken.
I'm really intimidated. Is this thing as hard as it looks to put back on, or is it not that bad.
I really would like to have it put back together for Sunday's Autocross.
If this is too much to handle, any suggestions on somebody to do it. Any idea what dealer will charge to install.
I'm really intimidated at this point.
I'm really intimidated. Is this thing as hard as it looks to put back on, or is it not that bad.
I really would like to have it put back together for Sunday's Autocross.
If this is too much to handle, any suggestions on somebody to do it. Any idea what dealer will charge to install.
I'm really intimidated at this point.
Last edited by docgatorx8er; 05-13-2008 at 08:32 PM.
#435
Grasshopper
iTrader: (1)
Looking at your pic Doc, the three hoses going to your intake (remember the three I questioned on your current setup) go to those fittings. If there is a "broken hose" attached, that was from the previous owner (don't know why he would have done that). I would just remove the hose and use your own.
#440
Grasshopper
iTrader: (1)
Attached is the solenoid I was referring to.
You'll notice a green harness plugged into it (which is probably zip tied somewhere off to the side).
I believe this connection is the green **** I was referring to in my previous statement.
Its honestly been YEARS since I've looked at it. I'm working until 6am, but when I get home I'll pull out everything (I'm better help when I can visually see everything).
If you are missing anything... I'll take care of you!
You'll notice a green harness plugged into it (which is probably zip tied somewhere off to the side).
I believe this connection is the green **** I was referring to in my previous statement.
Its honestly been YEARS since I've looked at it. I'm working until 6am, but when I get home I'll pull out everything (I'm better help when I can visually see everything).
If you are missing anything... I'll take care of you!
#444
Grasshopper
iTrader: (1)
Welcome to the club neolowrider!
I honestly don't know of a place around the Youngstown area that is recommended. Cascade Mazda in Cuyahoga Falls appears to be one of the choice picks around the Akron/Cleveland area... but thats quite a drive for you.
If nobody responds, I would suggest going around to the different dealers around Youngstown and see who gives you the best treatment, then let us know! Don't just stick to the 1st one you visit.
I honestly don't know of a place around the Youngstown area that is recommended. Cascade Mazda in Cuyahoga Falls appears to be one of the choice picks around the Akron/Cleveland area... but thats quite a drive for you.
If nobody responds, I would suggest going around to the different dealers around Youngstown and see who gives you the best treatment, then let us know! Don't just stick to the 1st one you visit.
#445
livin the dream......
Join Date: May 2008
Location: iraq
Posts: 7
Likes: 0
Received 0 Likes
on
0 Posts
i will be shopping around. just not sure if i should buy a new one or like a 06 with low miles. plus ill be droppin like 5 gs on the turbo kit. plus whatever else im guna put into her. like exaust, headers... stuf like that. want it to look stock, but destroy everything else on the road. not worryed about droppin money in it. gota spend all this tax free money somewhere. hahaha. im currently in iraq and wont be home till next spring. but my car will be done and waiting for me when i get there. dont realy care if i have to travel to get it. most likly i wont see it in person till next may. is there a big diff in the gt and the shinka or should i just get a base modle and do all the up grades myself? thanks for the help guys, also have a full custom truck for sle if anyone is interested. its in the cassifieds.
#446
TeethNThings.com
iTrader: (10)
Join Date: Mar 2008
Location: Mere seconds behind the leader...Doh!
Posts: 1,322
Likes: 0
Received 0 Likes
on
0 Posts
There's a copper red shinka near Pittsburgh for sale I know of. If your interested, let me know, pm. It's pricey, but only has 3400miles on it. yes, 3k.
#448
TeethNThings.com
iTrader: (10)
Join Date: Mar 2008
Location: Mere seconds behind the leader...Doh!
Posts: 1,322
Likes: 0
Received 0 Likes
on
0 Posts
Hey Jon,
Didn't you have an air intake you were gonna sell to Tony? If he hasn't taken it yet, can I get the parts I need from you, until I can pickup another unit? The I can replace them. Or if he isn't taking it, can I buy it from you?
The good news is I contacted the guy I bought it from and he refunded my money. All I'm out is the shipping. Seems fair.
Didn't you have an air intake you were gonna sell to Tony? If he hasn't taken it yet, can I get the parts I need from you, until I can pickup another unit? The I can replace them. Or if he isn't taking it, can I buy it from you?
The good news is I contacted the guy I bought it from and he refunded my money. All I'm out is the shipping. Seems fair.
#449
Grasshopper
iTrader: (1)
Well Doc... the intake Tony wants to buy from me is the AEM intake... which is the same design as your MS intake.
I just started pulling out my intake components, but couldn't find the VFAD assembly. I'll keep searching for those.
I just started pulling out my intake components, but couldn't find the VFAD assembly. I'll keep searching for those.
Last edited by Jon316G; 05-14-2008 at 07:33 AM.