RK

iTrader: (1)

I'd recommend 245s especially for the track. While the car runs fine on 225s that extra 20 is going to reduce your chance of wheel spin. My comps are 245/40/18s on stock wheels and I've got no complaints.

As for types of rubber I'm happy with my Coopers but their 275s on lighter wheels so it's hard to compare those with 245s or 225s on stockers. I probably wouldn't go with those if I didn't have a dedicated set of track tires but they have handled just fine when I took them out at Midohio and Nelsons. Brian just got RE01R's so he'll be able to let you now how those are working out once he puts 'em on (if he hasn't already).

Vyndictive

iTrader: (28)

Rex: if you're looking to do a track tire/wheel and a daily driver tire on OEM wheels, I got the bargain-bin general exclaims from tirerack. I can't so much for how they're holding up because I only used them a couple months before going to snows... but they're an improvement over the stock bridgestones and the price is right for all the highway miles I do.


Open for anyone else: A small brake gasket on my motorcycle sort of disintegrated when I was putting new pads on a few months back. I have had no luck at all finding any gasket specialist or anything of the sort (its small, about the size of a rubber band used for kids with braces: 1cm O.D. maybe) Any ideas on where else I can look?

ngill33

iTrader: (1)

Hey Guys,

Any one interested in making a couple bucks replacing my brakes and rotors in the next couple weeks? I am pretty strapped for cash lately so I am trying to cut costs when ever possible (hence the "slightly used" rotors I purchased from Highway8). If you are interested, please shoot me a PM. I'm in West Akron / Fairlawn.

Jon316G

iTrader: (1)

I'm sure you'll get people who'll do it for a couple beers.
I'm pretty booked this weekend, but I'm sure someone will chime in and assist.
If not, we can do it the following week.

BTW... where do you live in West Akron/Fairlawn?
I live in North-West Akron near Cascade Valley Park

RK

iTrader: (1)

I'd be happy to help out. I change pads all the time but haven't had the pleasure of changing the front rotors yet (rears just slide right off). What year is your 8, how many miles, and do you drive it in the winter?

I'm over in Fairlawn pretty much every weekend and I could probably spare a couple hours on saturday or Sunday.

Vyndictive

iTrader: (28)

Hmm, when my rears "slid" off, they required alot of heat, and a few dozen blows from a large mallet... Not to mention the screws on the front rotors had to be heated also... so, Ryan, take your torch. But, I realize my car refuses to make things easy.

Shinka_MJR

lol Steve. I think your car sees people approach and instantly clenches up like a guy going to his first proctologist visit.

Vyndictive

iTrader: (28)

Yeah... anything that should be easily removed is rusted or otherwise seized. Then, anything that shouldn't move rattles like a BB in a tin can.

I still can't get over how the car wouldn't stay running after the brake job and we all thought battery or PCM and it was that stupid SSV. . . *sigh*

I need to pull apart the intake again this spring and clean it again to ensure its still ok. Probably should seafoam again too. My car is "special needs."

ngill33

iTrader: (1)

Thanks Jon316G and RK.

I'm in a development off of SandRun, close to Market St. It doesn't have to be done at my place. I can drive anywhere in the Akron, Canton, Cle area if its easier to do the job at your place. I might not have all the necessary tools.

The rotors shipped yesterday from CA, so they won't be here until mid next week at the earliest. Weekends anytime, or nights after 6:00pm work best. I have a well lit garage with enough space if it gets dark.

While "a couple beers" is a nice gesture, who ever does the job is getting cash + beers if they want them. I'm a complete stranger to the forum, so I don't expect "handouts".

2004 / ~47k / yes - driven in the winter /

Much Appreciated,
Nate

DeViLbOi

iTrader: (1)

Well...welcome to the club Nate. I can tell you that the guys came out to my house and did my exhaust for 12 beers and 3 pizzas.

Vyndictive

iTrader: (28)

Nate - you own an RX8 - so, we know you enough.

I hope you didn't pay too much for the rotors... I have freshly turned OEM rotors sitting in the machine shop I work at that I probably won't ever use because I have drilled+slotted rotors now.
I may have asked for a little $, but I bet it would be less than your shipping costs...

Welcome to the local group - I say always ask here before venturing out into the greater forum.

docgatorx8er

iTrader: (10)

Yeah and John brought his car to my house and we took all night to do his brakes.

Everybody brought their own darn beer and my dog at an apple pie!

DeViLbOi

iTrader: (1)

And we had amazing food too. :P

Shinka_MJR

i know the area you're in very well Nate. welcome to the local chapter! I used to live near there but am down close to Vyn now, being in the massillon area.

We typically do get togethers about once a month. I've missed a couple lately but will be around for any coming up barring no insanity like the last time when the clothes washer broke down mid-cycle.

Anything planned for the next get together?

docgatorx8er

iTrader: (10)

Burger and venison and dogs, oh my.

Meeting at Boneyard Broadview Hts. April 24. I won't be there, but you can bring my license plate frame and leave it with someone. HINT, HINT.

ShinkaRex

I shot you a PM Nate. I'm about 20 mins away from Sandrun, in Hudson(actually just 2mins from Gopherage) I can run thru those Brakes pretty quickly and we can go for a drive and beers!

Shinka_MJR

ROFL. Like i said, its in the trunk just waiting for a new home.

Boneyard, eh? great... maybe i'll get lucky and run into the ex's ex-husband (long story short, i convinced her to leave him. that's a common hang out for him though)

Is there a set time? Figuring show up around 7ish, yes?

docgatorx8er

iTrader: (10)

yeah, they said 6, but a lot of people are going to get there around 7

DeViLbOi

iTrader: (1)

Yea...we wanted 6 so we could get a decently lit picture of everyone.

Danc

iTrader: (1)

Say a day, assuming my car is done (which COULD happen) I'd be glad to help out.

Speaking of my car, just an update for everyone. I got a front o2 sensor for a REALLY good price. Hopefully it will be here tomorrow. Assuming it is, All I need to do is splice some wires to the emanage, install the sensor, and put my dash back together and I should be able to leak test.

nbasuperstarkb08

Hey Doc-what year is your dime? As afor mentioned Im tricking out a 01 and I have an LMC book with exploded views. What really helps is my dad is a 27 year body tech/manger(12yrs GM-11yrs FMC).He spent 5 straight hours buffing and detailing my(previously owner neglected) 8 Tues nite.WOW!! Now it will run right up to 120MPH!I caugt him laughing like mad at the guessing game comments tonite.He got them both straight away.He wanted me to ask Jon316 what the torq spec is on that 54mm nut and will that long black handle "CLICK" when you get there? Let me know if i can help--you guys are a riot!!

Jon316G

iTrader: (1)

And its not a torque wrench, so no "CLICK".
Everything I've learned about cars has been pretty old school, so torque specs were hardly used.
Usually it was, "hand tighten, then another 1/2 - 3/4 turn!"

Only time I would really worry about torque specs is while rebuilding an engine.
That is something you want to really pay attention to and get right.
With everything I've done/taken apart in my car, it has yet to see a torque wrench.

Vyndictive

iTrader: (28)

oh.... so I shouldn't come then?

Shinka_MJR

6pm, gotcha. I'll be there but the wife wont. she works `til 6. If she does decide she wants to come, i wont be there until at least 7.

DeViLbOi

iTrader: (1)

yes yes...we know you won't be there Banned