Akron/Cleveland 8 Owners.
#7251
Grasshopper
iTrader: (1)
Getting dirty cleaning reflow ovens and having sticky solder flux all over yourself doesn't make the time better.
Then on my way home I have to stop by Autozone to purchase a rocker switch.
I know I mentioned that I got my lawnmower running, but when I started it and got out the garage door, it stalled and would start.
![Banghead](https://www.rx8club.com/images/smilies/banghead.gif)
So I took the carburetor apart and gave it a good clean, still didn't start.
I remove the spark plug and tied it to the muffler to check for spark... no spark.
I purchased a new spark plug and tried again... no spark.
I set the coil/magneto gap to 0.035" and tried again... no spark.
I then removed the ground from the coil... and finally a spark!
So basically, the kill switch was constantly grounding the coil as if the stop bar was never engaged.
So I'm going to wire the ground to a rocker switch so I can just turn off the mower with a flip of the switch
![Naughty](https://www.rx8club.com/images/smilies/naughty.gif)
Who needs that stop bar safety feature anyway?
It'll be nice to have the ability to walk around the mower to pick-up loose sticks without having the mower shut off!
#7254
good ole' wankel spanking
iTrader: (1)
Join Date: Mar 2009
Location: Strongsville, Ohio
Posts: 375
Likes: 0
Received 0 Likes
on
0 Posts
TJ:
Paypal Wording:
"We have received a complaint from a buyer who stated that merchandise you
sent them did not match your original description. The buyer is disputing
the quality of goods associated with the transaction detailed below.
As you may already be aware, PayPal's Buyer Complaint Policy applies only
to the shipment of goods and not to complaints about the attributes or
quality of goods received through an eBay transaction. Therefore, we will
not conduct an investigation into this matter at this time."
Paypal Wording:
"We have received a complaint from a buyer who stated that merchandise you
sent them did not match your original description. The buyer is disputing
the quality of goods associated with the transaction detailed below.
As you may already be aware, PayPal's Buyer Complaint Policy applies only
to the shipment of goods and not to complaints about the attributes or
quality of goods received through an eBay transaction. Therefore, we will
not conduct an investigation into this matter at this time."
so does this mean ill get my money now?
#7256
"13B vs. Renesis" Discuss
iTrader: (28)
Paypal is on your side.
I might be getting into a fight with autozone about the red top i bought for the bronco. I haven't gone in there yet, but I anticipate them trying to make me go through the manufacturer. pain in the ***.
Also, in prepping the bed for the Herculiner kit, I discovered further rust holes... damn 14 year old trucks. I think I'll post some pics here at the end of today if anyone cares, which I doubt they do.
#7257
good ole' wankel spanking
iTrader: (1)
Join Date: Mar 2009
Location: Strongsville, Ohio
Posts: 375
Likes: 0
Received 0 Likes
on
0 Posts
hah sorry i meant to post that i got the email after i escalated to a claim, they investigated it after i sent them the thread i bought the springs from and then they sent that email to me, the claim is closed now so they said the money should clear in about 3 business days.
#7259
good ole' wankel spanking
iTrader: (1)
Join Date: Mar 2009
Location: Strongsville, Ohio
Posts: 375
Likes: 0
Received 0 Likes
on
0 Posts
yeah as long as i get my money im fine with it, but now i got the guy i sold em to sending me a ton of PM's saying he's gonna make a bad name for me on the forum and that i'm an ******* and that i do business all wrong, but whatever.
#7262
good ole' wankel spanking
iTrader: (1)
Join Date: Mar 2009
Location: Strongsville, Ohio
Posts: 375
Likes: 0
Received 0 Likes
on
0 Posts
![Frown](https://www.rx8club.com/images/smilies/frown.gif)
#7266
Grasshopper
iTrader: (1)
So I finally had time to review the footage from the video shoot...
The drive by shots were alright... except John kept letting off early again.
But the worst was the side-by-side revving.
John's AP cat-back appears to have some loose rivets now because it was rattling like crazy whenever he was revving his car![Uh](https://www.rx8club.com/images/smilies/uh.gif)
Funniest part was listening to a stock RX8 revving after just hearing three modified 8s!
Too bad I can't use this video.
The drive by shots were alright... except John kept letting off early again.
But the worst was the side-by-side revving.
John's AP cat-back appears to have some loose rivets now because it was rattling like crazy whenever he was revving his car
![Uh](https://www.rx8club.com/images/smilies/uh.gif)
Funniest part was listening to a stock RX8 revving after just hearing three modified 8s!
Too bad I can't use this video.
#7267
The devil made me do it
iTrader: (1)
Join Date: Jul 2007
Location: Colorado Springs, CO
Posts: 3,708
Likes: 0
Received 2 Likes
on
2 Posts
There is no way I let off early...I was shifting basically into second 50' - 100' in front of you and going all the way through second gear before lifting. And as for the rattle...that is that noise that Steve said was the muffler against the frame. You guys said there was nothing you could do about it.
#7272
It's Not Easy Being Green
iTrader: (1)
Join Date: Apr 2008
Location: Akron, OH
Posts: 1,846
Likes: 0
Received 0 Likes
on
0 Posts
Updates on the part out. Here's how it's gone so far. Let me know if I've missed anyone.
http://spreadsheets.google.com/ccc?k...OcHVkTWc&hl=en
And TJ just let the whole thing go. Don't worry if your trader score gets knocked down one. Hell just buy my duct/intake and it'll be right back at 0.
http://spreadsheets.google.com/ccc?k...OcHVkTWc&hl=en
And TJ just let the whole thing go. Don't worry if your trader score gets knocked down one. Hell just buy my duct/intake and it'll be right back at 0.
![Wink](https://www.rx8club.com/images/smilies/wink.gif)
#7273
"13B vs. Renesis" Discuss
iTrader: (28)
Here is a clip with us revving side-by-side.
http://vimeo.com/5781943
http://vimeo.com/5781943
So you're telling me you want to re-shoot the video?
Ryan: I was thinking about your part out a bit, and, if you'd like like, because of the number of car getting something and the fact that you're going to need to install some of their stock parts, would you like to come down to the shop in Canton one Satruday with like Brian and I to do the swaps? We'd have ample room for all 3 cars to be on stands.
Plus that puts Brian here to help with a spring compressor. *Boing* . . .
Just an idea.
#7274
It's Not Easy Being Green
iTrader: (1)
Join Date: Apr 2008
Location: Akron, OH
Posts: 1,846
Likes: 0
Received 0 Likes
on
0 Posts
Ryan: I was thinking about your part out a bit, and, if you'd like like, because of the number of car getting something and the fact that you're going to need to install some of their stock parts, would you like to come down to the shop in Canton one Satruday with like Brian and I to do the swaps? We'd have ample room for all 3 cars to be on stands.
Plus that puts Brian here to help with a spring compressor. *Boing* . . .
Just an idea.
Plus that puts Brian here to help with a spring compressor. *Boing* . . .
Just an idea.