Akron/Cleveland 8 Owners.
#9502
The devil made me do it
iTrader: (1)
Join Date: Jul 2007
Location: Colorado Springs, CO
Posts: 3,708
Likes: 0
Received 2 Likes
on
2 Posts
*shrug* Ive got no real plans for tomorrow. Just know it is going to be warm and probably my best chance to do it before I really can't control the urge to not drive.
#9506
Registered User
Join Date: Jan 2010
Location: south euclid, ohio
Posts: 122
Likes: 0
Received 0 Likes
on
0 Posts
im pretty sure my car is stock. thats one of the things i wanna find out and also get some ideas of what i can do to it without going over the top and also voiding the warranty
#9508
Grasshopper
iTrader: (1)
John- I'm free tomorrow to help you out, just let me know when you want to get started.
Also, when I "hacked" my TomTom I lost all my contacts, so you'll need to PM me your address.
On a bright note... I got my iPod adapter installed!
Bastard took longer than it should have.
Lets just say I had to pull the HU out SEVERAL times because sometimes the CD and TAPE buttons didn't work after installing everything!![Wallbash](https://www.rx8club.com/images/smilies/wallbash.gif)
I was so pissed the Dremel even came out a couple times to lighten my mood.
Luckily I didn't cut through any wires!
Now its time to update the songs on my iPod for the road trip to John's tomorrow!
Also, when I "hacked" my TomTom I lost all my contacts, so you'll need to PM me your address.
On a bright note... I got my iPod adapter installed!
Bastard took longer than it should have.
Lets just say I had to pull the HU out SEVERAL times because sometimes the CD and TAPE buttons didn't work after installing everything!
![Wallbash](https://www.rx8club.com/images/smilies/wallbash.gif)
I was so pissed the Dremel even came out a couple times to lighten my mood.
Luckily I didn't cut through any wires!
Now its time to update the songs on my iPod for the road trip to John's tomorrow!
#9509
The devil made me do it
iTrader: (1)
Join Date: Jul 2007
Location: Colorado Springs, CO
Posts: 3,708
Likes: 0
Received 2 Likes
on
2 Posts
Did you secure the adapter that plugs into the tape mount with something other than the metal bar thingy? If you didn't, you want to get your *** back in there and do it. It falls out after about a day.
#9510
Grasshopper
iTrader: (1)
I actually did at first... but then removed it trying to "troubleshoot" why it wasn't working at first.
But the bar has a black pad that really holds it in tight (the bar doesn't sit straight because of it).
I was so aggravated with that thing, I'll probably just wait for it to come loose before going back in there.
The wiring for the gauges and my OBD-II port makes it more tricky getting in there now.
But the bar has a black pad that really holds it in tight (the bar doesn't sit straight because of it).
I was so aggravated with that thing, I'll probably just wait for it to come loose before going back in there.
The wiring for the gauges and my OBD-II port makes it more tricky getting in there now.
#9512
TeethNThings.com
iTrader: (10)
Join Date: Mar 2008
Location: Mere seconds behind the leader...Doh!
Posts: 1,322
Likes: 0
Received 0 Likes
on
0 Posts
Jo(h)n's: LOL
I can't make it up to your house today - too short notice. But I am working on Red's seats if you guys want to come down to my house and use my tools.
No speed bumps!
I can't make it up to your house today - too short notice. But I am working on Red's seats if you guys want to come down to my house and use my tools.
No speed bumps!
#9517
"13B vs. Renesis" Discuss
iTrader: (28)
Sounds like a decent car day all the way around. . .
I just finished up pulling some small bits off the donor car and cleaning the RB air filter. . .
Since I have the accordion tube off, and I have new oem coils sitting at home, I might as well replace those while I'm at it. Haven't replaced the coils since I've owned the car... its probably time.
Jon - You must clean your air filter. . . mine had probably half a pound of dirt/sand embedded into it. It was rough.
Doc - That tool is very good at breaking the little fins off much faster than I could have with a screw driver and hammer. I'm sort of at a loss as to how to get into the fuel tank now. I'm running out of fins and even I know that heat isn't a good solution for this problem.
Hope your seats and midpipe are in (respectively)
And it turns out that I do not have a mazdaspeed short shifter. Pulled mine out and compared with the shifter from the donor . . . identical.
I just finished up pulling some small bits off the donor car and cleaning the RB air filter. . .
Since I have the accordion tube off, and I have new oem coils sitting at home, I might as well replace those while I'm at it. Haven't replaced the coils since I've owned the car... its probably time.
Jon - You must clean your air filter. . . mine had probably half a pound of dirt/sand embedded into it. It was rough.
Doc - That tool is very good at breaking the little fins off much faster than I could have with a screw driver and hammer. I'm sort of at a loss as to how to get into the fuel tank now. I'm running out of fins and even I know that heat isn't a good solution for this problem.
Hope your seats and midpipe are in (respectively)
And it turns out that I do not have a mazdaspeed short shifter. Pulled mine out and compared with the shifter from the donor . . . identical.
#9519
The devil made me do it
iTrader: (1)
Join Date: Jul 2007
Location: Colorado Springs, CO
Posts: 3,708
Likes: 0
Received 2 Likes
on
2 Posts
Thanks for comin out Jon and helping me get that taken care of. I don't think I could have finished it alone that fast. Thanks for stoppin over Lee...always nice to meet the new guys.
#9521
"13B vs. Renesis" Discuss
iTrader: (28)
I don't know if it matters to you, but did you remove the reflectors from the clear corners? I like the look of them without.
Also, how long were those plugs in? A month? How many miles?? They look trashed for being so new! I had mine out a few weeks ago. Wire brushed them and put them back in.
Also, how long were those plugs in? A month? How many miles?? They look trashed for being so new! I had mine out a few weeks ago. Wire brushed them and put them back in.
#9522
Registered
iTrader: (1)
I left the reflectors in and left the white bulbs in too cause i didn't feel like buying stealth bulbs nor do i want the fried egg look (do you have any pics of the reflector removed?)...As far as the plugs go I'm guessing they are original and the car had about 57K on it when i took them out, I put brand new ones in...I don't think cleaning was an option for these because they are pretty bad and the electrode itself was chipped and degraded.
#9523
"13B vs. Renesis" Discuss
iTrader: (28)
Per the plugs, I think I misunderstood. I thought the plugs you posted a pic of were your month old plugs. It makes way more sense that those were the ones in there for 50k miles.
Per the Clear corners, I like the white anyway...
I didn't have any pics of the reflector vs. non reflector of my 8, but did find these on the forums:
The reflector is just a little plastic tab that blocks the light from being visible from the front of the car. . . i assume its to keep it from getting confused with a turn signal?
![](https://www.rx8club.com/attachments/series-i-do-yourself-forum-73/4351d1062695512-diy-side-marker-clear-corner-lights-installation-clear_mark_4.jpg)
And this is what it looks like with it removed:
Per the Clear corners, I like the white anyway...
I didn't have any pics of the reflector vs. non reflector of my 8, but did find these on the forums:
The reflector is just a little plastic tab that blocks the light from being visible from the front of the car. . . i assume its to keep it from getting confused with a turn signal?
![](https://www.rx8club.com/attachments/series-i-do-yourself-forum-73/4351d1062695512-diy-side-marker-clear-corner-lights-installation-clear_mark_4.jpg)
And this is what it looks like with it removed:
![](https://www.rx8club.com/attachments/series-i-do-yourself-forum-73/4359d1062696003-diy-side-marker-clear-corner-lights-installation-clear_mark_13.jpg)
#9524
The devil made me do it
iTrader: (1)
Join Date: Jul 2007
Location: Colorado Springs, CO
Posts: 3,708
Likes: 0
Received 2 Likes
on
2 Posts
ermmm....my reflector was metal...it makes it so the light only displays in the front half of the marker...and that picture of it with the reflector is horrid.
https://www.rx8club.com/attachment.p...4&d=1109227369
https://www.rx8club.com/attachment.p...4&d=1109227369