Trademark

Bolts for the cat are very very stuck... I banged on it though and I can hear pieces moving... Time to break out the air tools and heat

Jon316G

iTrader: (1)

Breaker bar is your friend

tiresmoker

iTrader: (1)

I know it may not help, but when my aem intake would get wet before I rerouted it to be STX legal, it would mist the MAFS and I couldn't accelerate over 6k. It was like the car hit fuel cut.


Also, is there some chance you crossed plug wires when you put them in?

Ps: don't hit your cat with a hammer. The ASPCA will get pissed. Lol

Trademark

Breaker Bar I got handed down to me from my grandpa who worked on tanks in WW2 did the job! I love that thing!

working on the exhaust hangers now... BTW if anyone wants to come on over with beer I'll give you some cash when you get here
(Yes I am 21 now)


MAFS is fine I have it out right now along with the rest of the stock intake.

No chance I crossed wires while doing plugs and coils... I am always very careful about this - Seen a friend do this and his car was pretty messed up until he sorted it out.

Also... I'm about to ram a screwdriver inside of my cat, do some damage to all of its organs and then poor them out... Will the ASPCA be pissed about this?


Thanks for the Tips guys

Trademark

My kitty was in bits before I even got it off. Took it off and tipped it down and 1/2 the catalyst fell out. Got the rest with a crowbar.

Drove it down the road without the exhaust... HOLY HELL the thing is loud.

All fixed and put back together - She runs great

I should get flames now right?

Vyndictive

iTrader: (28)

Yes, flames are always a possibility with the RX8.

I already bought you a Brady Quinn Denver Broncos jersey... now what I am supposed to do with it?

j/k... but I'm not shipping an 8lbs rotor to Cleveland, that's dumb. I'm sure I'll see you before you move.

blazenblue63

Hey guys what's been going on?

Sorry I couldn't be there Steve I was home early on Friday but had to leave out again Friday afternoon. Haven't had a full day off yet.

Does a gutted cat throw a cel?

And Brian damn lmfao!

Hopefully I'll see you guys Sunday at the race, not sure if I can make it.

ngill33

iTrader: (1)

Yeah, but what is the drive size for the breaker bar?

Seriously though, how many miles on your 8, and do you still have the heat issues you mentioned?

Vyndictive

iTrader: (28)

Couldn't be where? Most of us are meeting up this friday (6/17)... unless someone picks an internet fight with me over hand tools and I decide not to go.

too soon?

Yes.

Machiavelli

Meet still on for tomorrow, or has it been KBD (Killed by Drama)?

It'd be great to see you guys tomorrow, and to say goodbye to John.

Vyndictive

iTrader: (28)

Tom, my actual birthday is tomorrow, but we had the meet planned for this Friday, the 17th. Hope you're able to make it.

tiresmoker

iTrader: (1)

The meet is on the 17th. This Friday. I know I am still going, as well as Steve, Kristen, Megan, Jon...

Hopefully you can make it out Tom.

Oh and Steve, it's never too soon.

Shinka_MJR

where's the meet this friday? might try to make it and with the wife.

tiresmoker

iTrader: (1)

You people can't read. Lol

This Friday, 7:00pm, Dave and Busters, the one along side route 90 in Westlake.


Ps: Steve, whatever John paid you for the rotor I'll double it just so he can't have it. Hahahaha

Shinka_MJR

blazenblue63

Lmfao! Riiiiight okay..... um..... same thing as before. I'll try if I'm home on time.

I want the rotor too! I'll pay a Buck more than Brian :p

Then how come a bhr mid pipe doesn't throw a cel? I is confused......

Banned that pic is awesome.

Vyndictive

iTrader: (28)

Where were you guys when this rotor was in my for sale thread?

I don't know why the BHR midpipe won't throw a CEL unless it uses a o2 fowler (a device to trick the Oxygen sensor.) The S2000 folks do this with basically mini cat with the 02 sensor behind it off of the main pipe to not impede exhaust flow.

However, most devices for the RX8 like this didn't work well. So I don't know how BHR is claiming this. The only 100% way to run catless without a CEL is with a accessport, to my knowledge.

tiresmoker

iTrader: (1)

Yeah as far as I am aware you can't run an O2 cheater on the 8. The only way that I knownis possible is to basically get a spark plug defowler and drill it out to like 31/64 inside diameter. Thread that into the bung and thread the sensor into that.

This works because of the way the 8 pulses its fuel or some **** like that. It allows enough gas to get to the sensor and still read it, but not all of it so it thinks the cat has failed. So, my guess is that BHR did tons of testing with this theory on many different model years and found the happy medium to get something that would allow just enough exhaust to pass for the sensor to read the pulses to register a good cat. Lol

Trademark

Update on this... Getting on the highway last night I had a nice flash of light behind me, and it wasn't a cop...

CEL came on the first time I started it up... Strangely enough it didn't come all at all yesterday and I drove all over the place.

106k Miles roughly. Heat issues are gone as well as every other issue. I am however missing a brake pad clip I need to replace and that is making an awful lot of wracket.

I will most likely be attending.


I think I got everything?

Edit: This belong to anyone?
Coventry Parking Garage

Jon316G

iTrader: (1)

Brian is right in that there are no O2 fowlers that'll work with the RX8.
The only way to mask/trick the CEL is through the AccessPORT.
BHR's mid-pipe will throw a CEL if you don't have an AP.
BHR offers a mid-pipe with the DaveSport high-flow cat installed, which should prevent a CEL from illuminating.

blazenblue63

Aaaah I see! That's the one I need anyway since stx requires a cat. Now will you see less power gain with the high flow cat or is it pretty much the same as a straight midpipe? Anyone know what it sounds like with stock exhaust?

Vyndictive

iTrader: (28)

Why does it gotta be "Brian is right?"

Also, the Davesport high flow cat was the HFC I had on my rx8... it still threw a CEL every few drive cycles for the cat. The flow rate is 100 cpi, which is pretty damn free flowing. So while Im sure it'll keep the CEL off for awhile, I wouldn't plan on it to do the job for more than a few thousand miles.

blazenblue63

What was the sound like Steve? I don't want a "85 accord that thinks it's a viper" sound. Just a nice throaty deeper sound. I love the sound of Brian's borla. But a little quieter would be perfect.

I'm not gonna bother with an intake since it doesn't make much difference in gains. Maybe a catback if I get sick of looking at my tiny tail pipes lol. But that's all a few months away at least. I'm moving soon and the doctors bills keep shrinking my "fun" fund.

Jtaylor3

iTrader: (1)

I just put my Turbo XS cat back with my AP midpipe and it looks great but you can probably hear me from Canton lol

blazenblue63

You're in Canton? Which color? I see a blue one parked at the corner of tusk and Whipple a lot and a red one driving every now and then. Seen a yellow one once at bravo.