Long Island, NY RX8 Owners
#876
Registered Noob
Join Date: Sep 2007
Location: Long Island (Suffolk), NY
Posts: 808
Likes: 0
Received 0 Likes
on
0 Posts
No, its not that the my stock coils are dead or anything. I think there's an inadequate connection somewhere when I installed my ignition coil upgrade. Possibly an inadequate ground. Symptom is that the car misfires at around 10psi. It used to be grounded more poorly and misfired during free revving, it improved a lot when I moved the ground to a better spot (now misfires at 10psi instead of all the time). But when the weather gets nicer I am going to solder in a wire to give me the length needed to ground it to the negative battery terminal. That might do the trick. If not then, I probably made poor solder connections on the other wires and will have to redo them.
I will have to say though, as much as I support Esmeril, I gotta say I wish I got the BHR coils instead. Those don't need any soldering, and the grounding wire is far longer.
I will have to say though, as much as I support Esmeril, I gotta say I wish I got the BHR coils instead. Those don't need any soldering, and the grounding wire is far longer.
#878
Registered
iTrader: (1)
Yeah - there are a few "grounding kits" which for 90% of the people who put them on do very little if anything at all, people think they just look badass. But if you're getting misfires, and moving some grounding wires around a bit helped, then you can be pretty sure that a few more well-placed grounding wires would help a lot.
THEN we can work on your coils? :-)
THEN we can work on your coils? :-)
#880
Registered Noob
Join Date: Sep 2007
Location: Long Island (Suffolk), NY
Posts: 808
Likes: 0
Received 0 Likes
on
0 Posts
I don't think anything is wrong with my coils, just got to wire it better. In any case, I can't boost my car with my snow wheels on. Those wheels can't handle it, starts to break loose and misbehave. So I'm in no rush to fix it cuz I'll need to keep those wheels on for a while.
#881
Registered User
Join Date: Oct 2007
Location: long island
Posts: 374
Likes: 0
Received 0 Likes
on
0 Posts
Hey Gamechld is your misfire on decel or when it spools up? my car had a misfire and thats what made my motor go. check your plugs too. a bad plug or a bad coil can pop your motor. mine had a misfire for a while from a bad coil. At 1st i didn't think it was the coil because at hi rpm the car ran fine. An most of the time if a coil is bad when its on load it should misfire more an make the car run sh!ty.
#882
Registered
iTrader: (1)
I definitely don't have the time to do it for you, but if you're around some time I could show you what I did. Not gonna write out all the details here, but I put in an HD radio, line in for my mp3 player, and a splitter / equalizer unit to link them.
If all you want is the MP3 player input, you can do it yourself for about $100, it'll take about 1 to 3 hours, depending on how comfortable you are with taking apart some of your interior.
Basic Idea:
1) Buy this which converts Mazda's proprietary stereo out put into a somewhat more common "Alpine" format connector.
Link: http://www.discountcarstereo.com/detail.aspx?ID=445
2) Buy this which converts that "alpine" connector into a regular mini stereo plug, which will go into your MP3 player.
Link: http://www.discountcarstereo.com/detail.aspx?ID=767
If you are using an actual iPod and not some other mp3 player, use this instead:
http://www.discountcarstereo.com/detail.aspx?ID=884
3) Pull your stereo out of your dash using steps 1-6 from the below website. DO NOT do the steps after that, they are for something entirely different.
Link: http://whatsmyip.org/ipodrx8/
4) Plug the PIE adaptor into the aux/cd port in the back of the stereo, and mount the adaptor itself somewhere under the dashboard with zipties. Snake the stereo cable under the shifter/middle-console area and have the plug pop out by the cup holders.
Enjoy....
Last edited by elysium19; 01-10-2009 at 12:02 PM. Reason: spelling mistake
#883
Registered Noob
Join Date: Sep 2007
Location: Long Island (Suffolk), NY
Posts: 808
Likes: 0
Received 0 Likes
on
0 Posts
Hey Gamechld is your misfire on decel or when it spools up? my car had a misfire and thats what made my motor go. check your plugs too. a bad plug or a bad coil can pop your motor. mine had a misfire for a while from a bad coil. At 1st i didn't think it was the coil because at hi rpm the car ran fine. An most of the time if a coil is bad when its on load it should misfire more an make the car run sh!ty.
#884
Registered User
Join Date: Oct 2007
Location: long island
Posts: 374
Likes: 0
Received 0 Likes
on
0 Posts
Ok thats good to know. Its not good that your car isn't running right but good that your not having the same prob I had. I just didn't want your motor to go like me.
#885
I definitely don't have the time to do it for you, but if you're around some time I could show you what I did. Not gonna write out all the details here, but I put in an HD radio, line in for my mp3 player, and a splitter / equalizer unit to link them.
If all you want is the MP3 player input, you can do it yourself for about $100, it'll take about 1 to 3 hours, depending on how comfortable you are with taking apart some of your interior.
Basic Idea:
1) Buy this which converts Mazda's proprietary stereo out put into a somewhat more common "Apline" format connector.
Link: http://www.discountcarstereo.com/detail.aspx?ID=445
2) Buy this which converts that "alpine" connector into a regular mini stereo plug, which will go into your MP3 player.
Link: http://www.discountcarstereo.com/detail.aspx?ID=767
If you are using an actual iPod and not some other mp3 player, use this instead:
http://www.discountcarstereo.com/detail.aspx?ID=884
3) Pull your stereo out of your dash using steps 1-6 from the below website. DO NOT do the steps after that, they are for something entirely different.
Link: http://whatsmyip.org/ipodrx8/
4) Plug the PIE adaptor into the aux/cd port in the back of the stereo, and mount the adaptor itself somewhere under the dashboard with zipties. Snake the stereo cable under the shifter/middle-console area and have the plug pop out by the cup holders.
Enjoy....
If all you want is the MP3 player input, you can do it yourself for about $100, it'll take about 1 to 3 hours, depending on how comfortable you are with taking apart some of your interior.
Basic Idea:
1) Buy this which converts Mazda's proprietary stereo out put into a somewhat more common "Apline" format connector.
Link: http://www.discountcarstereo.com/detail.aspx?ID=445
2) Buy this which converts that "alpine" connector into a regular mini stereo plug, which will go into your MP3 player.
Link: http://www.discountcarstereo.com/detail.aspx?ID=767
If you are using an actual iPod and not some other mp3 player, use this instead:
http://www.discountcarstereo.com/detail.aspx?ID=884
3) Pull your stereo out of your dash using steps 1-6 from the below website. DO NOT do the steps after that, they are for something entirely different.
Link: http://whatsmyip.org/ipodrx8/
4) Plug the PIE adaptor into the aux/cd port in the back of the stereo, and mount the adaptor itself somewhere under the dashboard with zipties. Snake the stereo cable under the shifter/middle-console area and have the plug pop out by the cup holders.
Enjoy....
i appreciate the links and suggestions but i am too much of a chicken to take apart my interior!
![Banghead](https://www.rx8club.com/images/smilies/banghead.gif)
#887
Registered
iTrader: (1)
************************************************** **********
On another note: SIX TO NINE INCHES OF SNOW expected tomorrow afternoon/evening! First big snowstorm with my snow tires and I really cant wait to get tail-happy ;-)
Anyone else (with snow tires obviously) want to do some suburban snow drifting tomorrow late afternoon? I'll be going out around 4 or 5, should be excellent. I mostly want someone who can take some sweet videos... I'm in middle/western suffolk county.
On another note: SIX TO NINE INCHES OF SNOW expected tomorrow afternoon/evening! First big snowstorm with my snow tires and I really cant wait to get tail-happy ;-)
Anyone else (with snow tires obviously) want to do some suburban snow drifting tomorrow late afternoon? I'll be going out around 4 or 5, should be excellent. I mostly want someone who can take some sweet videos... I'm in middle/western suffolk county.
#888
Registered Noob
Join Date: Sep 2007
Location: Long Island (Suffolk), NY
Posts: 808
Likes: 0
Received 0 Likes
on
0 Posts
The step by step instructions with pictures can make a job like that idiot proof. There really isn't anything there you can screw up that will mar your interior. I installed a lotek gauge pod in my car, and that involved cutting a hole in a dash panel, and even THAT was pretty idiot proof. All the wiring and aesthetic defects are all hidden behind the radio or cigarette lighter. Just watch where you leave your soldering iron lying around, that's the only thing you can mess up :-P
#889
Registered User
iTrader: (1)
Join Date: Oct 2008
Location: Medford, Long Island
Posts: 43
Likes: 0
Received 0 Likes
on
0 Posts
![Smile](https://www.rx8club.com/images/icons/icon7.gif)
Whats up guys...today i took the 8 out for some snow fun i was with me and my to other friends who got evos....the sams club on hoseblock road in medford was an excellent spot..took some nice vids...if any of you haev nice spots to do some sliding around, around the medford and coram area let me know
![Smilie](https://www.rx8club.com/images/smilies/smile.gif)
#891
Anyone with a Brilliant Black RX8 looking for a Carbon fiber hood and trunk, im trading my car in this week. So im looking to swap for like 510$ for both... Pm me if anyone is interested.
#896
bi polar rotor loner
#897
Registered
iTrader: (1)
Join Date: Jan 2009
Location: Wantagh, Long Island
Posts: 227
Likes: 0
Received 0 Likes
on
0 Posts
Congrats on the speeding ticket, I guess that puts you in Nassau.
Are you the Yellow 8 that I've seen on the Meadowbrook that sounds like a perfectly tuned race car? If you are, congrats on having an awesome car too.
#899
Registered User
Join Date: Sep 2007
Location: Westbury
Posts: 89
Likes: 0
Received 0 Likes
on
0 Posts
#900
http://www.flickr.com/photos/34254053@N02/
there's all the pics...I'm trading my car in on Sunday the latest, so I'm trying to get rid of most the parts by then
there's all the pics...I'm trading my car in on Sunday the latest, so I'm trying to get rid of most the parts by then