Williards Build
#28
Dark Moderator
Thread Starter
iTrader: (18)
Legot,
I was getting some heavy crackling from the rear speakers so i want them gone. Since im doing them, i might as well upgrade more while im at it. I already have it all torn apart so why not right.
Im still hoping i can find someone who has done what im going to attempt to do so i can read what they have done and how they did it. I hate electrical crap.
I always do that when i update pics just so i know they work before i type everything out.
Travis
I was getting some heavy crackling from the rear speakers so i want them gone. Since im doing them, i might as well upgrade more while im at it. I already have it all torn apart so why not right.
Im still hoping i can find someone who has done what im going to attempt to do so i can read what they have done and how they did it. I hate electrical crap.
I always do that when i update pics just so i know they work before i type everything out.
Travis
#30
Dark Moderator
Thread Starter
iTrader: (18)
I lived at 4300 lake RD just off of East Rancier. I forget the name of the apartment complex to be honest.
Not bad all in all. I really wish i could get some of the mexican food from 10th street just outside the gate. Taquiara? Mabye that was the name i really dont remember.
or go to pluckers...
or eat a shipleys donut....or a box...
Travis
Not bad all in all. I really wish i could get some of the mexican food from 10th street just outside the gate. Taquiara? Mabye that was the name i really dont remember.
or go to pluckers...
or eat a shipleys donut....or a box...
Travis
#31
I lived at 4300 lake RD just off of East Rancier. I forget the name of the apartment complex to be honest.
Not bad all in all. I really wish i could get some of the mexican food from 10th street just outside the gate. Taquiara? Mabye that was the name i really dont remember.
or go to pluckers...
or eat a shipleys donut....or a box...
Travis
Not bad all in all. I really wish i could get some of the mexican food from 10th street just outside the gate. Taquiara? Mabye that was the name i really dont remember.
or go to pluckers...
or eat a shipleys donut....or a box...
Travis
#33
Driving my unreliable rx8
#37
Everywhere you are or near I have family lol, i got reletives there. And by the way, I just had another bacon and egg breakfast taco, extra bacon, thought id throw that in there, im off to work till midnight on that note lol
#39
Dark Moderator
Thread Starter
iTrader: (18)
Update,
I just purchased quite a few parts off of a friend of mine. It was like Christmas on my day off i loved it.
So in this haul i have..
-Syncro saver(RX8Performance)
-Alum. Oil pan(RX8Performance)
-Engine mounts(RX8Performance)
-Oil cooler screens(Hymee)
-Cobb AP
-Clutch pedal reinforcement bracket
Im slowly cleaning up and repainting everything i've taken off so far. I just layed the first layer of black on my crash bar before i left for work.
I have pictures and i'll update when i get a chance.
Travis
I just purchased quite a few parts off of a friend of mine. It was like Christmas on my day off i loved it.
So in this haul i have..
-Syncro saver(RX8Performance)
-Alum. Oil pan(RX8Performance)
-Engine mounts(RX8Performance)
-Oil cooler screens(Hymee)
-Cobb AP
-Clutch pedal reinforcement bracket
Im slowly cleaning up and repainting everything i've taken off so far. I just layed the first layer of black on my crash bar before i left for work.
I have pictures and i'll update when i get a chance.
Travis
#41
Dark Moderator
Thread Starter
iTrader: (18)
Legot,
I have not forgotten.
A lot has gone on in the past few weeks, some good, some bad.
As i said though i have gotten in some new parts from a friend and i figured i should share.
To the far left is new Engine mounts, Syncro saver, clutch pedal reinforcement bracket and the box is for my new COBB AP.
Second in from the left is my new Oil Pan. Under it's right side are Hymee oil cooler screens.
Next picture is my wife's Christmas present Squeeks(white and black). Tan one is Sophie and Marley is running around somewhere..
Last picture is my new Oil Filter relocation kit that i purchased from Bryan4140.
I have not forgotten.
A lot has gone on in the past few weeks, some good, some bad.
As i said though i have gotten in some new parts from a friend and i figured i should share.
To the far left is new Engine mounts, Syncro saver, clutch pedal reinforcement bracket and the box is for my new COBB AP.
Second in from the left is my new Oil Pan. Under it's right side are Hymee oil cooler screens.
Next picture is my wife's Christmas present Squeeks(white and black). Tan one is Sophie and Marley is running around somewhere..
Last picture is my new Oil Filter relocation kit that i purchased from Bryan4140.
#45
Dark Moderator
Thread Starter
iTrader: (18)
GK,
I have a low mileage motor with high compression scores across the board lined up for the time being.
Im going to rebuild My current engine slowly so i can learn the process.
I will eventually get a motor from Pettit or BHR <- that will be ported, pinned and upgraded seals obviously.
So yes, once done i will have 3 engine's total, as long as nothing gets Fubar.
Travis
I have a low mileage motor with high compression scores across the board lined up for the time being.
Im going to rebuild My current engine slowly so i can learn the process.
I will eventually get a motor from Pettit or BHR <- that will be ported, pinned and upgraded seals obviously.
So yes, once done i will have 3 engine's total, as long as nothing gets Fubar.
Travis
#46
SARX Legend
iTrader: (46)
I hope that pan fits better than the one I installed that had to be cut and ground on to get fit. It looks like it has been redesigned but still makes installing and removing the engine without hitting it a PIA though.
Last edited by dannobre; 12-08-2014 at 06:44 PM. Reason: Unnecessary
#47
SARX Legend
iTrader: (46)
It's just a Blox oil filter relocation kit for a Honda, you can get it new for $80.00, all you need is correct length hose and fittings (any hydraulic hose shop will sell high quality hose and fittings). Race Roots just makes the hoses and sells the kit for three times the price,
Last edited by 9krpmrx8; 12-08-2014 at 05:57 PM.
#48
Dark Moderator
Thread Starter
iTrader: (18)
Every part i have purchased so far, have come from members.
The only other thing i would like to add is please keep whatever personal vendetta's you have out of my build thread.
Thank You
Travis
The only other thing i would like to add is please keep whatever personal vendetta's you have out of my build thread.
Thank You
Travis
#49
Dark Moderator
Thread Starter
iTrader: (18)
Picture on the left, engine hanging.
Picture on the right, open hole and trans...
More rust removal, painting and thermo matting to come...
Stay tuned for the Slow and not so exciting action!
Travis
Picture on the right, open hole and trans...
More rust removal, painting and thermo matting to come...
Stay tuned for the Slow and not so exciting action!
Travis